Stainless Steel 316 Fasteners Manufacturer in India
Manufacturer of S31600 Hex Bolt in India With Various Dimensions
The ASTM A193 type 316 bolts provide better corrosion resistance properties than the 304 series bolts and nuts. The application of the fasteners range greatly in food preparation equipment, chemical processing equipment, laboratory equipment, heat exchangers, condensers, evaporator tanks and other high corrosive applications. The Grade 316 stainless steel screws have high chloride ion stress corrosion cracking. Therefor the fasteners of this grade can be used in sea water and chloride rich environments as well. The 316 SS Threaded Rod has similar tensile and yield strengths to the 304 grade. The minimum tensile strength is 515MPa and the minimum yield strength is 205MPa. The 316 SS carriage bolts are a special type of bolts used for heavy load bearing applications. There are different specifications under which the 316 fasteners can be produced. Tte ASTM A193 and A194 are the most common. The ASME SA 193 316 SS anchor bolts are intended for high temperature, high pressure, general corrosive services. The length of the fasteners ranges from 3mm to 200mm and the sizes range from 3/6 inches through 2 inches and custom sizes. The ASTM A193 316 Stainless Steel Hex Bolts are used to provide maximum mechanical strength as geometry of the nut provides additional strength as well. This is an austenitic stainless steel and Regal Sales Corporation is a leading SS 316 Nut Bolt manufacturer and supplier. These are often used in engineering applications and in engine components as well. Please feel free to contact us for more information on the different types of the bolts and nuts such as the Hex Bolt S31600 and others with full price list.
316 Stainless Steel Fasteners
316 SS Threaded Rod
Hex Bolt S31600
Table of Content
- What Does 316 Stainless Steel Fasteners means?
- 316 SS Threaded Rod Specifications, sizes and dimensions
- SS 316 Nut Bolt Equivalent Material
- 316 stainless steel bolts Chemical Formula
- Grade 316 stainless steel screws Mechanical Behaviour
- Physical Properties of S31600 Bolt
- 316 Stainless Steel Fasteners Types
- 316 Stainless Steel Studs Size Table
- Type 316 stainless steel fasteners Applications
- Maintain stock of Following Stainless Steel 316 Fasteners Types
- Stainless Steel 316 Bolts Torque Chart
- 316 SS Nuts And Bolts Dimensions
- Dimensions of Stainless Steel 316 Hex Nuts
- 316 SS Heavy Hex Nuts Dimension
Stainless Steel 316 Fasteners are some of the most used fasteners next to the 304 grade steel. The material is also known as the 19-8 steel due to the 18% chromium and 8% nickel in the composition with an additional 2-4% molybdenum in the mixture.
Regal Sales Corporation has a network in Saudi Arabia, Oman, and South Africa.
316 Stainless Steel Screws & AISI SS 316 Bolts Used in Oil & Gas, chemical processing, Check Specification
SS 316 Hex Bolt Sizes
- Washers : 3/6"- 2", M3 - M56
- Screw : M3 - M56, 3/6"-2"
- Nuts : M3 - M56, 3/6"- 2"
- Machine Screws : M1.6 - M12
Stainless Steel 316 Fasteners Length
- Length: 3 mm to 200 mm
- Density: 8.00 g/cm3
- Temp Range: 870°C
- Thickness: 1 - 300 mm
UNS S31600 Hex Bolts Features
- High tensile strength and durability
- Non-Magnetic
- Corrosion Resistant
- Low Maintenance
316 Stainless Steel Fasteners Threads
- BSF, UNC
- METRIC
- BSW
- UNF
SUS 316 Fasteners Drive Style
- Cross
- Oval
- Pan
- Truss
SS 316 Heavy Hex Bolt Finishing
- Geometry, Dacroment, Hot Dip Galvanised (HDG),
- Zinc , black oxide, BZP
- Anodizing, nickel plated, plated zinc-nickel
ASTM A194 SS 316 Fasteners Delivered Origins
- Lebanon
- Qatar
- Oman
- Turkey
Grade 316 SS Screws Thread Class
- 5 ONF
- Class 2A (Medium fit)
- 2G
- 3G
- 4G
Form of SS316 Heavy Hex Bolts
- Corrosion Testing
- Tensile Testing
- Hardness Testing
- Impact Testing
AISI SS 316 Carriage Bolt Head Type
- Phillips/ Slot
- Phillips
- Slotted
- Six-Lobe
A4 316 Stainless Steel Bolt And Nut Production process
- Machining and CNC
- Cold Forging
- Hot Forging
- Customized
AISi 316 SS Surface Coating
- Ptfe Coated , Zinc Coated
- Xylon Coated, Phosphate
- Hot Dipped Galvanizing
- Teflon , Cadmium
INOX 316 Fasteners Applications
- Food Processing and Beverage Industry
- Construction, Automotive
- Chemical and Petrochemical Industry
Din 1.4401 Machine screws Packaging Methods
- Pallet
- Carton
- Small Pack
- Corrugated Box
SS Type 316 Threaded Rod Testing Methods
- Corrosion Testing
- Tensile Testing
- Hardness Testing
- Impact Testing
Stainless Steel 316 Fasteners Supplier in India offers a diverse range of commonly used fasteners Types
Type 316 Stainless Steel U Bolts
UNS S31600 Nuts & Washers
Stainless Steel 316 Bolts
316 SS Belleville Washers
316 Stainless Steel Exhaust Bolts
1.4401 Stainless Steel Anchor Bolt
AISI 316 Springs
SS 316 Hex Bolts
EN 1.4401 Barrel Nuts
316 Grade Stainless Steel Spring Pin
SUS 316 Square U Bolts
UNS S31600 Stainless Steel Threaded Rod
ASTM A193 UNS S31600 Lag Bolts
WNR 1.4401 Threaded Stud
WERKSTOFF NR. 1.4401 Flat Head Screws
Astm A193 Stainless Steel 316 Flat Washers
ASME SA193 UNS S31600 Exhaust Studs
AISI 316 Stainless Steel Hex Cap Screws
ASME SA193 SS 316 Stud Bolts
DIN 1.4401 Carriage Bolts
Stainless Steel 316 Bolts and Nuts
SS 316 Spring Washers
Type 316 Stainless Steel Wheel Nuts
ASME SA193 UNS S31600 Rings
316 Grade Stainless Steel Nuts and Bolts
UNS S31600 Stainless Steel Set Screws
UNS S31600 Hex Nuts
Astm A193 Stainless Steel 316 Self Tapping Screws
SUS 316 Cap Screws
ASME SA193 SS 316 Countersunk Bolts
AISI 316 Stainless Steel Nord Lock Washers
AISI 316 Threaded Rod
WNR 1.4401 Studs
316 Stainless Steel Hex Head Bolts
DIN 1.4401 Self Drilling Screw
ASTM A193 UNS S31600 Socket Head Cap Screws
Get SS 316 Bolts and Nuts & ASTM A193 Stainless Steel 316 Nut with Various Dimensions, Check Size Chart
| Nut Size (mm) |
Diameter* (mm) |
Height (mm) |
||
|---|---|---|---|---|
| Hex Nut | Jam Nut | Nylock Nut | ||
| 2 | 4 | 1.6 | 1.2 | - |
| 2.5 | 5 | 2 | 1.6 | - |
| 3 | 5.5 | 2.4 | 1.8 | 4 |
| 4 | 7 | 3.2 | 2.2 | 5 |
| 5 | 8 | 4 | 2.7 | 5 |
| 6 | 10 | 5 | 3.2 | 6 |
| 7 | 11 | 5.5 | 3.5 | - |
| 8 | 13 | 6.5 | 4 | 8 |
| 10 | 17 | 8 | 5 | 10 |
| 12 | 19 | 10 | 6 | 12 |
| 14 | 22 | 11 | 7 | 14 |
| 16 | 24 | 13 | 8 | 16 |
| 18 | 27 | 15 | 9 | 18.5 |
| 20 | 30 | 16 | 10 | 20 |
| Torque Specifications | |||||||
|---|---|---|---|---|---|---|---|
Bolt Size Inches or # |
Threads Per Inch |
Standard Dry Torque in Inch-Pounds |
|||||
304 Stainless Steel |
316 Stainless Steel |
||||||
| #2 | 56 | 2.5 | 2.6 | ||||
| 64 | 3.0 | 3.2 | |||||
| #3 | 48 | 3.9 | 4.0 | ||||
| 56 | 4.4 | 4.6 | |||||
| #4 | 40 | 5.2 | 5.5 | ||||
| 48 | 6.6 | 6.9 | |||||
| #5 | 40 | 7.7 | 8.1 | ||||
| 44 | 9.4 | 9.8 | |||||
| #6 | 32 | 9.6 | 10.1 | ||||
| 40 | 12.1 | 12.7 | |||||
| #8 | 32 | 19.8 | 20.7 | ||||
| 36 | 22.0 | 23.0 | |||||
| #10 | 24 | 22.8 | 23.8 | ||||
| 32 | 31.7 | 33.1 | |||||
Bolt Size Inches or # |
Threads Per Inch |
Standard Dry Torque in Inch-Pounds |
|||||
304 Stainless Steel |
316 Stainless Steel |
||||||
| 1/4 | 20 | 75.2 | 78.8 | ||||
| 28 | 94.0 | 99.0 | |||||
| 5/16 | 18 | 132 | 138 | ||||
| 24 | 142 | 147 | |||||
| 3/8 | 16 | 236 | 247 | ||||
| 24 | 259 | 271 | |||||
| 7/16 | 14 | 376 | 393 | ||||
| 20 | 400 | 418 | |||||
| 1/2 | 13 | 517 | 542 | ||||
| 20 | 541 | 565 | |||||
Bolt Size Inches or # |
Threads Per Inch |
Standard Dry Torque in Inch-Pounds |
|||||
304 Stainless Steel |
316 Stainless Steel |
||||||
| 9/16 | 12 | 682 | 713 | ||||
| 18 | 752 | 787 | |||||
| 5/8 | 11 | 1110 | 1160 | ||||
| 18 | 1244 | 1301 | |||||
| 3/4 | 10 | 1530 | 1582 | ||||
| 16 | 1490 | 1558 | |||||
| 7/8 | 9 | 2328 | 2430 | ||||
| 14 | 2318 | 2420 | |||||
| 1 | 8 | 3440 | 3595 | ||||
| 14 | 3110 | 3250 | |||||
Bolt Size Inches or # |
Threads Per Inch |
Standard Dry Torque in Foot-Pounds |
|||||
304 Stainless Steel |
316 Stainless Steel |
||||||
| 1 1/8 | 7 | 413 | 432 | ||||
| 12 | 390 | 408 | |||||
| 1 1/4 | 7 | 523 | 546 | ||||
| 12 | 480 | 504 | |||||
| 1 1/2 | 6 | 888 | 930 | ||||
| 12 | 703 | 732 | |||||
Stainless Steel 316 Fasteners Manufacturer in India offers a wide Range of Dimensions
**All measurements in millimeters**
| NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNEASTM A193 | ACROASTM A193 THE FLATS | ACROASTM A193 CORNERS | ||||
|---|---|---|---|---|---|---|---|---|
| D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
| m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
| m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
| m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
| m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
| m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
| m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
| m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
| m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
| m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
| m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
| m56 | 56.00 | 55.26 | 36.2 | 33.80 | 85.00 | 82.20 | 98.15 | 93.71 |
| m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
| m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
| m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
| m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
| m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
| Nominal Size or Basic Major Thread Diameter | F | G | H | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Width Across Flats |
Width Across Corners |
Thickness | |||||||
| Basic | Max | Min | Max | Min | Basic | Max | Min | ||
| 1/4 | .2500 | 7/16 | .438 | .428 | .505 | .488 | 7/32 | .226 | .212 |
| 5/16 | .3125 | 1/2 | .500 | .489 | .577 | .557 | 17/64 | .273 | .258 |
| 3/8 | .3750 | 9/16 | .562 | .551 | .650 | .628 | 21/64 | .337 | .479 |
| 7/16 | .4375 | 11/16 | .688 | .675 | .794 | .768 | 3/8 | .385 | .365 |
| 1/2 | .5000 | 3/4 | .750 | .736 | .866 | .840 | 7/16 | .448 | .427 |
| 9/16 | .5625 | 7/8 | .875 | .861 | 1.010 | .982 | 31/64 | .496 | .473 |
| 5/8 | .6250 | 15/16 | .938 | .922 | 1.083 | 1.051 | 35/64 | .559 | .535 |
| 3/4 | .7500 | 1-1/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | .665 | .617 |
| 7/8 | .8750 | 1-5/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | .776 | .724 |
| 1 | 1.0000 | 1-1/2 | 1.500 | 1.450 | 1.732 | 1.653 | 55/64 | .887 | .831 |
| 1-1/8 | 1.1250 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | .999 | .939 |
| 1-3/8 | 1.3750 | 2-1/16 | 2.062 | 1.994 | 2.382 | 2.273 | 1-11/64 | 1.206 | 1.138 |
| 1-1/2 | 1.500 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 1-9/32 | 1.ASTM A194 GR. 8 | 1.245 |
| 1-5/8 | 1.6250 | 2-7/16 | 2.438 | 2.356 | 2.815 | 2.686 | 1-25/64 | 1.429 | 1.353 |
| 1-3/4 | 1.7500 | 2-5/8 | 2.625 | 2.538 | 3.031 | 2.893 | 1-1/2 | 1.540 | 1.460 |
| 2 | 2.0000 | 3 | 3.000 | 2.900 | 3.464 | 3.306 | 1-23/32 | 1.763 | 1.675 |
| 2-1/4 | 2.2500 | 3-3/8 | 3.375 | 3.263 | 3.897 | 3.719 | 1-15/16 | 1.986 | 1.890 |
| 2-1/2 | 2.5000 | 3-3/4 | 3.750 | 3.625 | 4.330 | 4.133 | 2-5/32 | 2.209 | 2.105 |
| 2-3/4 | 2.7500 | 4-1/8 | 4.125 | 3.988 | 4.763 | 4.546 | 2-3/8 | 2.431 | 2.319 |
| Nominal Size or Basic Major Thread Diameter | F | G | H | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Width Across Flats | Width Across Corners | Thickness | |||||||
| Basic | Max | Min | Max | Min | Basic | Max | Min | ||
| 1/4 | .2500 | 1/2 | .500 | .488 | .577 | .556 | 15/64 | .250 | .218 |
| 5/16 | .3125 | 9/16 | .562 | .546 | .650 | .622 | 19/64 | .314 | .280 |
| 3/8 | .3750 | 11/16 | .688 | .669 | .794 | .763 | 23/64 | .377 | .341 |
| 7/16 | .4375 | 3/4 | .750 | .728 | .866 | .830 | 27/64 | .441 | .403 |
| 1/2 | .5000 | 7/8 | .875 | .850 | 1.010 | .969 | 31/64 | .504 | .464 |
| 9/16 | .5625 | 15/16 | .938 | .909 | 1.083 | 1.037 | 35/64 | .568 | .526 |
| 5/8 | .6250 | 1-1/16 | 1.062 | 1.031 | 1.227 | 1.175 | 39/64 | .631 | .587 |
| 3/4 | .7500 | 1-1/4 | 1.250 | 1.212 | 1.443 | 1.382 | 47/64 | .758 | .710 |
| 7/8 | .8750 | 1-7/16 | 1.438 | 1.394 | 1.660 | 1.589 | 55/64 | .885 | .833 |
| 1 | 1.0000 | 1-5/8 | 1.325 | 1.575 | 1.876 | 1.796 | 63/64 | 1.012 | .956 |
| 1-1/8 | 1.1250 | 1-13/16 | 1.812 | 1.756 | 2.093 | 2.002 | 1-7/64 | 1.139 | 1.079 |
| 1-1/4 | 1.2500 | 2 | 2.000 | 1.938 | 2.309 | 2.209 | 1-7/32 | 1.251 | 1.187 |
| 1-3/8 | 1.3750 | 2-3/16 | 2.188 | 2.119 | 2.526 | 2.416 | 1-11/32 | 1.378 | 1.460 |
| 1-1/2 | 1.5000 | 2-3/8 | 2.375 | 2.300 | 2.742 | 2.622 | 1-15/32 | 1.505 | 1.433 |
| 1-5/8 | 1.6250 | 2-9/16 | 2.562 | 2.481 | 2.959 | 2.828 | 1-19/32 | 1.632 | 1.556 |
| 1-3/4 | 1.7500 | 2-3/4 | 2.750 | 2.662 | 3.175 | 3.035 | 1-23/32 | 1.759 | 1.679 |
| 2 | 2.0000 | 3-1/8 | 3.125 | 3.025 | 3.608 | 3.449 | 1-31/32 | 2.013 | 1.925 |
| 2-1/4 | 2.2500 | 3-1/2 | 3.500 | 3.388 | 4.041 | 3.862 | 2-13/64 | 2.251 | 2.155 |
| 2-1/2 | 2.5000 | 3-7/8 | 3.875 | 3.750 | 4.474 | 4.275 | 2-29/64 | 2.505 | 2.401 |
| 2-3/4 | 2.7500 | 4-1/4 | 4.250 | 4.112 | 4.907 | 4.688 | 2-45/64 | 2.759 | 2.647 |
| 3 | 3.0000 | 4-5/8 | 4.625 | 4.475 | 5.340 | 5.102 | 2-61/64 | 3.013 | 2.893 |
| 3-1/4 | 3.2500 | 5 | 5.000 | 4.838 | 5.774 | 5.515 | 3-3/16 | 3.252 | 3.124 |
| 3-1/2 | 3.5000 | 5-3/8 | 5.375 | 5.200 | 6.207 | 5.928 | 3-7/16 | 3.506 | 3.370 |
| 3-3/4 | 3.7500 | 5-3/4 | 5.750 | 5.562 | 6.640 | 6.341 | 3-11/16 | 3.670 | 3.616 |
| 4 | 4.0000 | 6-1/8 | 6.125 | 5.925 | 7.073 | 6.755 | 3-15/16 | 4.014 | 3.862 |
| Grade | UNS No |
Old British | Euronorm | Swedish SS |
Japanese JIS |
||
|---|---|---|---|---|---|---|---|
| BS | En | No | Name | ||||
| 316 | S31600 | 316S31 | 58H, 58J | 1.4401 | X5CrNiMo17-12-2 | 2347 | SUS 316 |
| 316L | S31603 | 316S11 | - | 1.4404 | X2CrNiMo17-12-2 | 2348 | SUS 316L |
| 316H | S31609 | 316S51 | - | - | - | - | - |
Get UNS S31600 Studs & SS 316 Hex Bolts With Maximum Hardness Available in Rockwell C, Check Mechanical Properties
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
|---|---|---|---|---|---|---|---|---|---|---|
| 316 | Min | - | - | - | 0 | - | 16.0 | 2.00 | 10.0 | - |
| Max | 0.08 | 2.0 | 0.75 | 0.045 | 0.03 | 18.0 | 3.00 | 14.0 | 0.10 | |
| 316L | Min | - | - | - | - | - | 16.0 | 2.00 | 10.0 | - |
| Max | 0.03 | 2.0 | 0.75 | 0.045 | 0.03 | 18.0 | 3.00 | 14.0 | 0.10 | |
| 316H | Min | 0.04 | 0.04 | 0 | - | - | 16.0 | 2.00 | 10.0 | - |
| max | 0.10 | 0.10 | 0.75 | 0.045 | 0.03 | 18.0 | 3.00 | 14.0 | - |
| Grade | Tensile Str (MPa) min |
Yield Str 0.2% Proof (MPa) min |
Elong (% in 50mm) min |
Hardness | |
|---|---|---|---|---|---|
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 316 | 515 | 205 | 40 | 95 | 217 |
| 316L | 485 | 170 | 40 | 95 | 217 |
| 316H | 515 | 205 | 40 | 95 | 217 |
Get Type 316 Stainless Steel Fasteners & Din 1.4401 Stud Bolts with High resistance to general corrosion in acids, Check Chemical Composition
| Grade | Density (kg/m3) |
Elastic Modulus (GPa) |
Mean Co-eff of Thermal Expansion (µm/m/°C) | Thermal Conductivity (W/m.K) |
Specific Heat 0-100°C (J/kg.K) |
Elec Resistivity (nΩ.m) |
|||
|---|---|---|---|---|---|---|---|---|---|
| 0-100°C | 0-315°C | 0-538°C | At 100°C | At 500°C | |||||
| 316/L/H | 8000 | 193 | 15.9 | 16.2 | 17.5 | 16.3 | 21.5 | 500 | 740 |
| Property | 316 | 316L |
|---|---|---|
| Carbon Content | 0.08% | 0.03% |
| Weldability | Less weldable | More weldable |
| Corrosion Resistance | Good, but can be affected in welded areas | Better, especially in welded areas |
| Applications | General industrial | Welding, chemical, food, pharma |
| Strength | Slightly stronger | Slightly weaker |
| Cost | Less expensive | More expensive |
- ➤ Sensitization
- ➤ Corrosion
- ➤ Distortion
- ➤ Strength Loss
- ➤ Cracking
- ➤ Minimization
- ➤ More Cost
- ➤ Chloride Stress Corrosion
- ➤ Low Strength at High Temps
- ➤ Abrasive Wear
- ➤ Difficult to Weld
- ➤ Magnetic
Yes, Stainless Steel 316 fasteners are commonly used in the oil and gas industry due to their excellent resistance to corrosion.