321 Stainless Steel Fasteners
321 Stainless Steel Fasteners are made up of a titanium stabilized austenitic stainless steel. The material composition is similar to the 304 material but with the addition of 0.7% titanium. The contents are carbon, chromium, iron, manganese, nitrogen, nickel, phosphorus, sulfur, silicon and titanium. The fasteners range is size, shape and standards. The 321 Stainless Steel Hex Nut is one of the fasteners used for heavy duty applications.
321 Stainless Steel Fasteners
321 Stainless Steel Bolts
ASTM A193 321 SS Threaded Rod
The material can operate at temperatures up to 816 degrees Celsius. Due to the high operating temperatures, the Stainless Steel 321 Bolts can be used in high temperature applications. The material has 621MPa minimum tensile strength and 276MPa minimum yield strength. This allows the fasteners to be used in high stress conditions as well. The material is also highly corrosion resistant and the 321 SS Hex Bolts and other types can be used in general corrosive as well as high corrosive applications. The fasteners range in type, dimensions and standards. They come under ASTM A193 and 194 standards with sizes ranging from M02 to M33. The length of the fasteners can be up to 500mm. there are different types such as the SS 321 Socket Cap Screw, eye bolts, hanger bolts, hex head bolts, stud bolts, U bolts, lag bolts and so on. Each of the type has a different advantage. The 321 SS Stud Bolt comes with a stud that can either be welded or bolted in applications. The applications range from oil and gas, general corrosive services, chemical, pharmaceutical, food processing, construction, heat exchanger and in engineering applications.
Table of Content
- 321 Stainless Steel Fasteners Specification Chart
- Basic Types Of 321 SS Stud Bolt
- 321 SS Stud Bolt Dimension Chart
- Dimension of 321 Stainless Steel Nuts
- Sizes of ASTM A193 321 SS Fasteners
- SS UNS S32100 Bolts Size Chart
- Stainless Steel 321 Nut Chemical Properties
- SS 321H Lag Bolt Mechanical Strength
- Equivalent Grades Of 321H SS Counter sunk Bolt
| Specifications of 321 Stainless Steel Fasteners | ASTM A193 / A193, ASME SA193 / SA194 |
| Standard of 321 Stainless Steel Fasteners | DIN, ASTM, BS and all International Standards |
| Length of 321 Stainless Steel Fasteners | 3 mm to 200 mm |
| 321 Stainless Steel Nuts Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
| 321 Stainless Steel Bolt / Screw Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
| 321 Stainless Steel Machine Screws Size | M1.6 - M12 |
| 321 Stainless Steel Washers Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
| Stainless Steel Grades | SS 321 |
| 321 Stainless Steel Fasteners Type | Nut, Hex Coupling Nut, Hex Nut, Square Nut, Hex Domed Cap Nuts, Hex Head Bolts, Stud Bolts, Socket Hexagon Head Screw, Pan Head Screw, Socket Head Cap Screw, Wing Screw, T-Head Bolts, Foundation Bolts,Screw, Studs, Socket Screw, Hex Set Screw, Cap Screw, Machine Screw, Wing Screw, Spring Washers, Washers, Studs, Marine Anchors, Anchors, Hexagon Nut,U- Bolts, Anchor Bolt, Mushroom Head Square Neck Bolts, J Bolts,Eye Bolt,Structural Bolts, Bolts, Nuts, Sockets, Screws, Allen Cap screw |
SS 321 Heavy Hex Bolts
321 SS Lag Bolts
SUS321 Allen Cap Bolt
321 SS Double Ended Studs
AISI 321 Acorn Nuts
321 Stainless Steel Serrated Flange Nuts
ASME SA193 321 SS Eye Nuts
AISI 321 Lock Nut
UNS S32100 SS Spring Washers
Grade 321 SS Wing Screw
SS Grade 321 Self Tapping Screw
AISI 321 SS Coach Screw
NOMINAL SIZE (D) |
BODY DIAMETER |
HEAD THICKNEASTM A193 |
ACROASTM A193 THE FLATS |
ACROASTM A193 CORNERS |
||||
|---|---|---|---|---|---|---|---|---|
D (MAX) |
D (MIN) |
H (MAX) |
H (MIN) |
F (MAX) |
F (MIN) |
C (MAX) |
C (MIN) |
|
m10 |
10.00 |
9.78 |
6.63 |
6.17 |
17.00 |
15.73 |
18.48 |
17.77 |
m12 |
12.00 |
11.73 |
7.76 |
4.24 |
19.00 |
17.73 |
20.78 |
20.03 |
m14 |
14.00 |
13.73 |
9.09 |
8.51 |
22.00 |
20.67 |
24.25 |
23.35 |
m16 |
16.00 |
15.73 |
10.32 |
9.68 |
24.00 |
23.67 |
27.71 |
26.75 |
m20 |
20.00 |
19.67 |
12.88 |
12.12 |
30.00 |
29.16 |
34.64 |
32.95 |
m24 |
24.00 |
23.67 |
15.44 |
14.56 |
36.00 |
35.00 |
41.57 |
39.55 |
m30 |
30.00 |
29.67 |
19.48 |
17.92 |
46.00 |
45.00 |
53.12 |
50.85 |
m36 |
36.00 |
35.61 |
23.38 |
21.63 |
55.00 |
53.80 |
63.51 |
60.79 |
m42 |
42.00 |
41.38 |
26.97 |
25.03 |
65.00 |
62.90 |
75.06 |
71.71 |
m48 |
48.00 |
47.38 |
31.07 |
28.93 |
75.00 |
72.60 |
86.60 |
82.76 |
m56 |
56.00 |
55.26 |
36.2 |
33.80 |
85.00 |
82.20 |
98.15 |
93.71 |
m64 |
64.00 |
63.26 |
41.32 |
38.68 |
95.00 |
91.80 |
109.70 |
104.65 |
m72 |
72.00 |
71.26 |
46.45 |
43.55 |
105.00 |
101.40 |
121.24 |
115.60 |
m80 |
80.00 |
79.26 |
51.58 |
48.42 |
115.00 |
111.00 |
132.72 |
126.54 |
m90 |
90.00 |
89.13 |
57.74 |
54.26 |
130.00 |
125.50 |
150.11 |
143.07 |
m100 |
90.00 |
99.13 |
63.9 |
60.10 |
145.00 |
140.00 |
167.43 |
159.60 |
Nominal Size or Basic Major Thread Diameter |
F |
G |
H |
||||||
Width Across Flats |
Width Across Corners |
Thickness |
|||||||
Basic |
Max |
Min |
Max |
Min |
Basic |
Max |
Min |
||
1/4 |
.2500 |
7/16 |
.438 |
.428 |
.505 |
.488 |
7/32 |
.226 |
.212 |
5/16 |
.3125 |
1/2 |
.500 |
.489 |
.577 |
.557 |
17/64 |
.273 |
.258 |
3/8 |
.3750 |
9/16 |
.562 |
.551 |
.650 |
.628 |
21/64 |
.337 |
.479 |
7/16 |
.4375 |
11/16 |
.688 |
.675 |
.794 |
.768 |
3/8 |
.385 |
.365 |
1/2 |
.5000 |
3/4 |
.750 |
.736 |
.866 |
.840 |
7/16 |
.448 |
.427 |
9/16 |
.5625 |
7/8 |
.875 |
.861 |
1.010 |
.982 |
31/64 |
.496 |
.473 |
5/8 |
.6250 |
15/16 |
.938 |
.922 |
1.083 |
1.051 |
35/64 |
.559 |
.535 |
3/4 |
.7500 |
1-1/8 |
1.125 |
1.088 |
1.299 |
1.240 |
41/64 |
.665 |
.617 |
7/8 |
.8750 |
1-5/16 |
1.312 |
1.269 |
1.516 |
1.447 |
3/4 |
.776 |
.724 |
1 |
1.0000 |
1-1/2 |
1.500 |
1.450 |
1.732 |
1.653 |
55/64 |
.887 |
.831 |
1-1/8 |
1.1250 |
1-11/16 |
1.688 |
1.631 |
1.949 |
1.859 |
31/32 |
.999 |
.939 |
1-3/8 |
1.3750 |
2-1/16 |
2.062 |
1.994 |
2.382 |
2.273 |
1-11/64 |
1.206 |
1.138 |
1-1/2 |
1.500 |
2-1/4 |
2.250 |
2.175 |
2.598 |
2.480 |
1-9/32 |
1.ASTM A194 GR. 8 |
1.245 |
1-5/8 |
1.6250 |
2-7/16 |
2.438 |
2.356 |
2.815 |
2.686 |
1-25/64 |
1.429 |
1.353 |
1-3/4 |
1.7500 |
2-5/8 |
2.625 |
2.538 |
3.031 |
2.893 |
1-1/2 |
1.540 |
1.460 |
2 |
2.0000 |
3 |
3.000 |
2.900 |
3.464 |
3.306 |
1-23/32 |
1.763 |
1.675 |
2-1/4 |
2.2500 |
3-3/8 |
3.375 |
3.263 |
3.897 |
3.719 |
1-15/16 |
1.986 |
1.890 |
2-1/2 |
2.5000 |
3-3/4 |
3.750 |
3.625 |
4.330 |
4.133 |
2-5/32 |
2.209 |
2.105 |
2-3/4 |
2.7500 |
4-1/8 |
4.125 |
3.988 |
4.763 |
4.546 |
2-3/8 |
2.431 |
2.319 |
Nut Size (mm) |
Diameter* (mm) |
Height (mm) |
||
|---|---|---|---|---|
Hex Nut |
Jam Nut |
Nylock Nut |
||
2 |
4 |
1.6 |
1.2 |
- |
2.5 |
5 |
2 |
1.6 |
- |
3 |
5.5 |
2.4 |
1.8 |
4 |
4 |
7 |
3.2 |
2.2 |
5 |
5 |
8 |
4 |
2.7 |
5 |
6 |
10 |
5 |
3.2 |
6 |
7 |
11 |
5.5 |
3.5 |
- |
8 |
13 |
6.5 |
4 |
8 |
10 |
17 |
8 |
5 |
10 |
12 |
19 |
10 |
6 |
12 |
14 |
22 |
11 |
7 |
14 |
16 |
24 |
13 |
8 |
16 |
18 |
27 |
15 |
9 |
18.5 |
20 |
30 |
16 |
10 |
20 |
* This is the diameter across the flats. It is also the size of wrench to use. |
||||
Size |
USS |
SAE |
||||
|---|---|---|---|---|---|---|
Inside Diameter (A) |
Outside Diameter (B) |
Thickness (C) |
Inside Diameter (A) |
Outside Diameter (B) |
Thickness (C) |
|
#2 |
- |
- |
- |
3/32" |
1/4" |
0.020" |
#4 |
- |
- |
- |
1/8" |
5/16" |
0.032" |
#6 |
- |
- |
- |
5/32" |
3/8" |
0.049" |
#8 |
- |
- |
- |
3/16" |
7/16" |
0.049" |
Grade |
C |
Mn |
Si |
P |
S |
Cr |
Mo |
Ni |
N |
|
321 |
min.
max. |
-
0.080 |
-
2 |
-
1 |
-
0.045 |
-
0.030 |
-
19 |
-
- |
-
13 |
-
- |
Grade |
Tensile Strength (MPa) min |
Yield Strength 0.2% Proof (MPa) min |
Elongation (% in 50mm) min |
Hardness |
|
Rockwell B (HR B) max |
Brinell (HB) max |
||||
321 |
515 MPa |
205 MPa |
40% |
95 |
217 |
Grade |
UNS No |
Old British |
Euronorm |
Swedish SS |
Japanese JIS |
||
BS |
En |
No |
Name |
||||
321 |
S32100 |
321S31 |
58B, 58C |
1.4541 |
X6CrNiTi18-10 |
2337 |
SUS 321 |