ASTM A182 Grade F5 Flange
Leading Manufacturer of Alloy Steel F5 Flanges in India, With Different Flanges Face Types
The standards vary as ASME B16.5, B16.47, B16.48 and so on. The A182 F5 Blind Flange is a general type that is used to close a pipeline. The blind flanges can either be welded or be fitted with some bolts and nuts. There are temporary and permanent flange connection types.The sa182 f5 material properties allow the flanges to have 275MPa minimum yield strength and 485MPa minimum tensile strength.
F5 Chrome Moly Pipe Flanges are formed with carbon, manganese silicon, phosphorus, sulphur, chromium and molybdenum. Through the presence of chromium ranging from 4-6%, the ASTM A182 Grade F5 Lap Joint flanges had better resistance to the acids and caustic solutions. ASTM A182 Grade F5 Flange Manufacturer in India, Based on the face type there are variety of flanges such as the flat faced flange, raised face flange, ring type joint flange.
ASTM A182 Gr F5 WNRF Flanges are Welding neck raised face flanges, which are available in large sizes in addition to standard sizes. Much grip is achieved through raised face and the welded neck is desirable to hold the pipe in flange during welding. A182 Gr F5 Slip on Flange manufacturer, Regal Sales Corporation is one of the preeminent manufacturers and suppliers of the ASEAN region of the all types of flange including ASTM A182 F5 Slip on Flange and others.
Table of Content
- What is ASTM A182 Grade F5?
- Specifications Of ASTM A182 Grade F5
- Types Of ASTM A182 F5
- ASTM A182 F5 Slip On Flanges Weight Chart
- Pressure Temperature Ratings Of SA 182 F5
- Wall Thickness Chart Of ASTM A182 F5 Alloy Steel
- Dimension Of SA 182 F5 Flanges
- Size Chart Of ASTM A182 Gr F5 Flanges
- ASTM A182 F5 SORF Flanges Equivalent Standards
- ASTM A182 Gr F5 Loose Flanges Chemical Compositions
- ASTM A182 F5 BLRF Flange Physical Properties
- ASTM A182 F5 Plate Flanges Mechanical Properties
- What Are The Differences Between ASTM A182 F5 and ASTM A182 F11?
- How To Extend The Lifespan Of F5 Components ?
- What Are The Heat Treatment Process For ASTM A182 Grade F5
- What Are the Forging Process for ASTM A182 Grade F5 Flanges?
- What Are The ASTM A182 F5 Welding Techniques?
SA182 Gr F5 Slip on Flange
Alloy Steel F5 Flanges
ASTM A182 F5 Flanges
ASTM A182 Grade F5 is a low alloy steel product that finds its application in high service temperature environment. It contains chromium and molybdenum, it mainly offers high strength features, outstanding oxidation and creep features. Usually applied to flanges, fittings, and valves, ASTM A182 Grade F5 Flange Supplier in India can be adapted to steam and high-pressure service applications of power stations and chemical manufacturing companies.
Get SA182 F5 Slip On flange & ASME A182 F5 Weld Neck Flange With Size Ranging From 1/2 inch to 36 inch, Refer Specifications
Size
- DN15 – DN1500
- NPS: ½" to 48"
- PN 2.5 – PN 400
Features
- Toughness Improved
- Versatile Uses
- Corrosion Resistant
- Durable
Applications
- Petrochemicals
- Infrastructure
- Automotive, Aerospace
- Marine
Thickness
- SCH 60/ 80/ 100
- SCH 120/ 140
- SCH 10/ 20/ 40
- SCH 160/ 180
Surface Coating
- Teflon, Xylan, Zinc
- Cadmium, Galvanized
- Black Oxide
- Others Upon Request
Disadvantages
- Expensive
- Not Compatible With Low temperatures
- Machining Difficulties
Pressure
- CL 300 - 400
- CL 600 - 900
- CL 125 - 150
- CL 1500 - 2500
Finishing
- Cold Water Finish
- Concentric Serrated
- Spiral Serrated
- Mirror , Serrated Finish
- Smooth Finish
Testing Methods
- PMI test
- Hardness test
- Tensile test
- Impact test
Threads type
- BSP,NPT
- MPT/ BSPT
- BSPP, MNPT
- FPT
Production process
- Machining
- Plating
- Casting
- Forging
Connections
- Threaded
- Welding
Packaging Methods
- Carton
- Wooden
- Plastic
Standard
- ASME/ANSI B16.5
- ASME/ANSI B16.48
- ASME/ANSI B16.47
- ASME/ANSI B16.36
Certification
- Third Party Inspection
- NACE MR0175
- 100% Radiography Test
- MTC BS EN 10204 3.1/ 3.2
ASTM A182 Gr F5 Industrial Flange
ASTM A182 F5 Steel BLRF Flange
A182 F5 Reducing Flange
SA 182 F5 Raised Face Flange
A182 Gr F5 SORF Flange
SA182 F5 WNRF Flange
SA182F5 Flat Flanges
ASTM A182 F5 steel Orifice Flange
ASTM A182 F5 Slip On Flange
ASTM A182 Gr F5 Socket Weld Flange
ASTM A182 F5A Groove & Tongue Flanges
SA182 F5 Square Flange
A182 Gr F5 Expander Flange
A182 F5 Plate Flange
ASTM A182 F5 Alloy Steel Blind Flange
A 182 F5 High Hub Flanges
Refer Dimension Chart of ASME SA 182 Grade F5 Weld Neck Flanges according to the ANSI, ASME Standard
| Normal Diam. | Thk. Of Flange Min | O.D. Flange | Length Hub.Y | Diam. of Hub | Diameter of Raised Face | Diam. of Bolt Circle | Thread Length | Diam. of Bolt Holes | Diam. of Bolts (inch) | Number of Bolts | KG | LB | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| inch | dn | C | O | Y | X | G | BC | T | BH | BD | BN | ||
| 3/4" | 20 | 12.70 | 98.50 | 15.70 | 38.10 | 42.90 | 69.90 | 15.70 | 15.80 | 1/2" | 4 | 0.7 | 1.5 |
| 1" | 25 | 14.20 | 108.00 | 17.50 | 49.30 | 50.80 | 79.30 | 17.50 | 15.80 | 1/2" | 4 | 0.8 | 1.8 |
| 1/2" | 15 | 11.20 | 89.00 | 15.70 | 30.20 | 35.10 | 60.50 | 15.70 | 15.80 | 1/2" | 4 | 0.4 | 0.9 |
| 1-1/4" | 32 | 15.70 | 117.50 | 20.60 | 58.70 | 63.50 | 88.90 | 20.60 | 15.80 | 1/2" | 4 | 1.2 | 2.6 |
| 1-1/2" | 40 | 17.50 | 127.00 | 22.40 | 65.00 | 73.20 | 98.60 | 22.40 | 15.80 | 1/2" | 4 | 1.5 | 3.3 |
| 2-1/2" | 65 | 22.40 | 178.00 | 28.40 | 90.40 | 104.60 | 139.70 | 28.40 | 19.10 | 5/8" | 4 | 3.7 | 8.1 |
| 3" | 80 | 23.90 | 190.50 | 30.20 | 108.00 | 127.00 | 152.40 | 30.20 | 19.10 | 5/8" | 4 | 4.1 | 9 |
| 2" | 50 | 19.10 | 152.50 | 25.40 | 77.70 | 91.90 | 120.70 | 25.40 | 19.10 | 5/8" | 4 | 2.3 | 5.1 |
| 20" | 500 | 42.90 | 698.50 | 73.20 | 558.80 | 584.20 | 635.00 | 73.20 | 31.80 | 1 1/8" | 20 | 76 | 167 |
| 4" | 100 | 23.90 | 228.50 | 33.30 | 134.90 | 157.20 | 190.50 | 33.30 | 19.10 | 5/8" | 8 | 5.9 | 13 |
| 5" | 125 | 23.90 | 254.00 | 36.60 | 163.60 | 185.70 | 215.90 | 36.60 | 22.40 | 3/4" | 8 | 7 | 15.4 |
| 3-1/2" | 90 | 23.90 | 216.00 | 31.80 | 122.20 | 139.70 | 177.80 | 31.80 | 19.10 | 5/8" | 8 | 5.1 | 11.2 |
| 6" | 150 | 25.40 | 279.50 | 39.60 | 192.00 | 215.90 | 241.30 | 39.60 | 22.40 | 3/4" | 8 | 8.4 | 18.5 |
| 12" | 300 | 31.80 | 482.50 | 55.60 | 365.30 | 381.00 | 431.80 | 55.60 | 25.40 | 7/8" | 12 | 29 | 64 |
| 18" | 450 | 39.60 | 635.00 | 68.30 | 505.00 | 533.40 | 577.90 | 68.30 | 31.80 | 1 1/8" | 16 | 57 | 126 |
| 8" | 200 | 28.40 | 343.00 | 44.50 | 246.10 | 269.70 | 298.50 | 44.50 | 22.40 | 3/4" | 8 | 13 | 28.6 |
| 10" | 250 | 30.20 | 406.50 | 49.30 | 304.80 | 323.90 | 362.00 | 49.30 | 25.40 | 7/8" | 12 | 18 | 39.5 |
| 14" | 350 | 35.10 | 533.50 | 57.20 | 400.10 | 412.80 | 476.30 | 57.20 | 28.50 | 1" | 12 | 39 | 86 |
| 24" | 600 | 47.80 | 813.00 | 82.60 | 663.40 | 692.20 | 749.30 | 82.60 | 35.10 | 1 1/4" | 20 | 97 | 214 |
| 16" | 400 | 36.60 | 597.00 | 63.50 | 457.20 | 469.90 | 539.80 | 63.50 | 28.50 | 1" | 16 | 47 | 103 |
| Temp.°F | 2500# PSIG | 600# PSIG | 1500# PSIG | 900# PSIG |
|---|---|---|---|---|
| 400 | 5775 | 1385 | 3465 | 2080 |
| -20~100 | 6250 | 1500 | 3750 | 2250 |
| 500 | 5540 | 1330 | 3325 | 1995 |
| 700 | 4730 | 1135 | 2840 | 1705 |
| 750 | 4430 | 1065 | 2660 | 1595 |
| 200 | 6250 | 1500 | 3750 | 2250 |
| 300 | 6015 | 1445 | 3610 | 2165 |
| 850 | 4060 | 975 | 2435 | 1460 |
| 800 | 4230 | 1015 | 2540 | 1525 |
| 900 | 3745 | 900 | 2245 | 1350 |
| 950 | 2655 | 640 | 1595 | 955 |
| 1200 | 345 | 80 | 205 | 125 |
| 1000 | 1800 | 430 | 1080 | 650 |
| 600 | 5040 | 1210 | 3025 | 1815 |
| 1050 | 1200 | 290 | 720 | 430 |
| 650 | 4905 | 1175 | 2940 | 1765 |
| 1100 | 800 | 190 | 480 | 290 |
| 1150 | 545 | 130 | 325 | 195 |
| Temp.°F | 400# PSIG | 150# PSIG | 75# PSIG | 300# PSIG |
|---|---|---|---|---|
| 200 | 1000 | 260 | 130 | 750 |
| -20~100 | 1000 | 290 | 145 | 750 |
| 600 | 805 | 140 | 70 | 605 |
| 500 | 885 | 170 | 85 | 665 |
| 750 | 710 | 95 | – | 530 |
| 800 | 675 | 80 | – | 510 |
| 900 | 600 | 50 | – | 450 |
| 700 | 755 | 110 | – | 570 |
| 850 | 650 | 65 | – | 485 |
| 300 | 965 | 230 | 115 | 720 |
| 400 | 925 | 200 | 100 | 695 |
| 950 | 425 | 35 | – | 320 |
| 1000 | 290 | 20 | – | 215 |
| 1150 | 85 | – | – | 65 |
| 650 | 785 | 125 | 60 | 590 |
| 1050 | 190 | – | – | 145 |
| 1100 | 130 | – | – | 95 |
| Thickness Of ASTM A182 F5 Flanges | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NPS (Normal Pipe Sizes) | Outside Daimeter (O.D.) | Schedule 120 | Schedule 20 | Schedule 30 | STD Wall | Schedule 160 | Schedule 60 | EXT Hvy | Schedule 40 | Schedule 10 | Schedule 100 | Schedule 140 | Schedule 80 | XX Hvy |
| 20 | 20 | 1.5 | 0.375 | 0.5 | 0.375 | 1.969 | 0.812 | 0.5 | 0.594 | 0.25 | 1.281 | 1.75 | 1.031 | ... |
| ½ | 0.84 | ... | ... | ... | 0.109 | 0.188 | ... | 0.147 | 0.109 | 0.083 | ... | ... | 0.147 | 0.294 |
| 5 | 5.563 | 0.5 | ... | ... | 0.258 | 0.625 | ... | 0.375 | 0.258 | 0.134 | ... | ... | 0.375 | 0.75 |
| ¾ | 1.05 | ... | ... | ... | 0.113 | 0.219 | ... | 0.154 | 0.113 | 0.083 | ... | ... | 0.154 | 0.308 |
| 3 ½ | 4 | ... | ... | ... | 0.226 | ... | ... | 0.318 | 0.226 | 0.12 | ... | ... | 0.318 | 0.636 |
| 6 | 6.625 | 0.562 | ... | ... | 0.28 | 0.719 | ... | 0.432 | 0.28 | 0.134 | ... | ... | 0.432 | 0.864 |
| 8 | 8.625 | 0.719 | 0.25 | 0.277 | 0.322 | 0.906 | 0.406 | 0.5 | 0.322 | 0.148 | 0.594 | 0.812 | 0.5 | 0.875 |
| 1 | 1.315 | ... | ... | ... | 0.133 | 0.25 | ... | 0.179 | 0.133 | 0.109 | ... | ... | 0.179 | 0.358 |
| 1 ¼ | 1.66 | ... | ... | ... | 0.14 | 0.25 | ... | 0.191 | 0.14 | 0.109 | ... | ... | 0.191 | 0.382 |
| 2 ½ | 2.875 | ... | ... | ... | 0.203 | 0.375 | ... | 0.276 | 0.203 | 0.12 | ... | ... | 0.276 | 0.552 |
| 3 | 3.5 | ... | ... | ... | 0.216 | 0.438 | ... | 0.3 | 0.216 | 0.12 | ... | ... | 0.3 | 0.6 |
| 12 | 12.75 | 1 | 0.25 | 0.33 | 0.375 | 1.312 | 0.562 | 0.5 | 0.406 | 0.18 | 0.844 | 1.125 | 0.688 | 1 |
| 4 | 4.5 | 0.438 | ... | ... | 0.237 | 0.531 | ... | 0.337 | 0.237 | 0.12 | ... | ... | 0.337 | 0.674 |
| 10 | 10.75 | 0.844 | 0.25 | 0.307 | 0.365 | 1.125 | 0.5 | 0.5 | 0.365 | 0.165 | 0.719 | 1 | 0.594 | 1 |
| 48 | 48 | …….. | …….. | …….. | 0.375 | …….. | …….. | 0.5 | …….. | …….. | …….. | …….. | …….. | …….. |
| 26 | 26 | .... | .... | .... | 0.375 | .... | .... | 0.5 | .... | .... | .... | .... | .... | .... |
| 14 | 14 | 1.094 | 0.312 | 0.375 | 0.375 | 1.406 | 0.594 | 0.5 | 0.438 | 0.25 | 0.938 | 1.25 | 0.75 | ... |
| 16 | 16 | 1.219 | 0.312 | 0.375 | 0.375 | 1.594 | 0.656 | 0.5 | 0.5 | 0.25 | 1.031 | 1.438 | 0.844 | ... |
| 36 | 36 | .... | 0.5 | 0.625 | 0.375 | .... | .... | 0.5 | 0.75 | 0.312 | .... | .... | .... | .... |
| 22 | 22 | .... | ... | ... | 0.375 | .... | ... | 0.5 | ... | 0.25 | ... | .... | ... | .... |
| 24 | 24 | 1.812 | 0.375 | 0.562 | 0.375 | 2.344 | 0.969 | 0.5 | 0.688 | 0.25 | 1.531 | 2.062 | 1.219 | .... |
| 1 ½ | 1.9 | ... | ... | ... | 0.145 | 0.281 | ... | 0.2 | 0.145 | 0.109 | ... | ... | 0.2 | 0.4 |
| 2 | 2.375 | ... | ... | ... | 0.154 | 0.344 | ... | 0.218 | 0.154 | 0.109 | ... | ... | 0.218 | 0.436 |
| 30 | 30 | .... | 0.5 | 0.625 | 0.375 | .... | .... | 0.5 | .... | 0.312 | .... | .... | .... | .... |
| 42 | 42 | …….. | …….. | …….. | 0.375 | …….. | …….. | 0.5 | …….. | …….. | …….. | …….. | …….. | …….. |
| 18 | 18 | 1.375 | 0.312 | 0.438 | 0.375 | 1.781 | 0.75 | 0.5 | 0.562 | 0.25 | 1.156 | 1.562 | 0.938 | ... |
| 40 | 40 | .... | .... | .... | 0.375 | .... | .... | 0.5 | .... | .... | .... | .... | .... | .... |
| NPS | O.D. of Flange | Diameter of RF | Flanges Thickness | Diameter at Base | Bore or Diameter | Lengtd Tdru Hub | Radius of Fillet | Dia. of Hub at Bevel | Depth of Socket | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Slip-on (SORF) Socket (SWRF) | Lap Joint (Loose) | Welding (WN) Neck | Slip-On (SORF) Threaded (NPT) Socket (SWRF) | Lap Joint (Loose) | ||||||||
| O | R | Q | X | W | B | Y | Y | Y | r | H | Z | |
| 5 | 10 | 7.5/16 | 15/16 | 6-7/16 | 5.66 | 5.69 | 3-1/2 | 1-7/16 | 1-7/16 | 7/16 | 5.56 | 15/16 |
| 1 | 4-1/4 | 2 | 9/16 | 1-15/16 | 1.36 | 1.38 | 2-3/16 | 11/16 | 11/16 | 1/8 | 1.32 | 1/2 |
| 6 | 11 | 8-1/2 | 1 | 7-9/16 | 6.72 | 6.75 | 3-1/2 | 1-9/16 | 1-9/16 | 1/2 | 6.63 | 1-1/16 |
| 2 | 6 | 3-5/8 | 3/4 | 3-1/16 | 2.44 | 2.46 | 2-1/2 | 1 | 1 | 5/16 | 2.38 | 11/16 |
| 1/2 | 3-1/2 | 1-3/8 | 7/16 | 1-3/16 | .88 | .90 | 1-7/8 | 5/8 | 5/8 | 1/8 | .84 | 3/8 |
| 1-1/4 | 4-5/8 | 2-1/2 | 5/8 | 2-5/16 | 1.70 | 1.72 | 2-1/4 | 13/16 | 13/16 | 3/16 | 1.66 | 9/16 |
| 2-1/2 | 7 | 4-1/8 | 7/8 | 3-9/16 | 2.94 | 2.97 | 2-3/4 | 1-1/8 | 1-1/8 | 5/16 | 2.88 | 3/4 |
| 3 | 7-1/2 | 5 | 15/16 | 4-1/4 | 3.57 | 3.60 | 2-3/4 | 1-3/16 | 1-3/16 | 3/8 | 3.50 | 13/16 |
| 8 | 13-1/2 | 10-5/8 | 1-1/8 | 9-11/16 | 8.72 | 8.75 | 4 | 1-3/4 | 1-3/4 | 1/2 | 8.63 | 1-1/4 |
| 18 | 25 | 21 | 1-9/16 | 19-7/8 | 18.18 | 18.20 | 5-1/2 | 2-11/16 | 3-13/16 | 1/2 | 18.00 | 1-15/16 |
| 1-1/2 | 5 | 2-7/8 | 11/16 | 2-9/16 | 1.95 | 1.97 | 2-7/16 | 7/8 | 7/8 | 1/4 | 1.90 | 5/8 |
| 10 | 16 | 12-3/4 | 1-3/16 | 12 | 10.88 | 10.92 | 4 | 1-15/16 | 1-15/16 | 1/2 | 10.75 | 1-5/16 |
| 3-1/2 | 8-1/2 | 5-1/2 | 15/16 | 4-13/16 | 4.07 | 4.10 | 2-13/16 | 1-1/4 | 1-1/4 | 3/8 | 4.00 | 7/8 |
| 4 | 9 | 6-3/16 | 15/16 | 5-5/16 | 4.57 | 4.60 | 3 | 1-5/16 | 1-5/16 | 7/16 | 4.50 | 15/16 |
| 12 | 19 | 15 | 1-1/4 | 14-3/8 | 12.88 | 12.92 | 4-1/2 | 2-3/16 | 2-3/16 | 1/2 | 12.75 | 1-9/16 |
| 24 | 32 | 27-1/4 | 1-7/8 | 26-1/8 | 24.25 | 24.25 | 6 | 3-1/4 | 4-3/8 | 1/2 | 24.00 | 2-1/2 |
| 14 | 21 | 16-1/4 | 1-3/8 | 15-3/4 | 14.14 | 14.18 | 5 | 2-1/4 | 3-1/8 | 1/2 | 14.00 | 1-5/8 |
| 20 | 27-1/2 | 23 | 1-11/16 | 22 | 20.20 | 20.25 | 5-11/16 | 2-7/8 | 4-1/16 | 1/2 | 20.00 | 2-1/8 |
| 16 | 23-1/2 | 18-1/2 | 1-7/16 | 18 | 16.16 | 16.19 | 5 | 2-1/2 | 3-7/16 | 1/2 | 16.00 | 1-3/4 |
| Class 150 | Class 600 | Class 300 | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Studs & Bolts | Stud Length | Dia of Bolts And Studs | Studs & Bolts | Stud Length | Diameter of Bolts & Studs | Studs & Bolts | Stud Length | Dia of Bolts & Studs |
| 1/16 RF | 1/4 RF | 1/16 RF | |||||||
| 1 | 4 | 2-1/2 | 0.50 | 4 | 3-1/2 | 0.63 | 4 | 3 | 0.63 |
| 2 | 4 | 3-1/4 | 0.63 | 8 | 4-1/4 | 0.63 | 8 | 3-1/2 | 0.63 |
| 2-1/2 | 4 | 3-1/2 | 0.63 | 8 | 4-3/4 | 0.75 | 8 | 4 | 0.75 |
| 3 | 4 | 3-1/2 | 0.63 | 8 | 5 | 0.75 | 8 | 4-1/4 | 0.75 |
| 10 | 12 | 4-1/2 | 0.88 | 16 | 8-1/2 | 1.25 | 16 | 6-1/4 | 1.00 |
| 16 | 16 | 5-1/4 | 1.00 | 20 | 10 | 1.50 | 20 | 7-1/2 | 1.25 |
| 3-1/2 | 8 | 3-1/2 | 0.63 | 8 | 5-1/2 | 0.88 | 8 | 4-1/4 | 0.75 |
| 4 | 8 | 3-1/2 | 0.63 | 8 | 5-3/4 | 0.88 | 8 | 4-1/2 | 0.75 |
| 1/2 | 4 | 2-1/4 | 0.50 | 4 | 3 | 0.50 | 4 | 2-1/2 | 0.50 |
| 5 | 8 | 3-3/4 | 0.75 | 8 | 6-1/2 | 1.00 | 8 | 4-3/4 | 0.75 |
| 3/4 | 4 | 2-1/2 | 0.50 | 4 | 3-1/2 | 0.63 | 4 | 3 | 0.63 |
| 18 | 16 | 5-3/4 | 1.13 | 20 | 10-3/4 | 1.63 | 24 | 7-3/4 | 1.25 |
| 6 | 8 | 4 | 0.75 | 12 | 6-3/4 | 1.00 | 12 | 4-3/4 | 0.75 |
| 8 | 8 | 4-1/4 | 0.75 | 12 | 7-1/2 | 1.13 | 12 | 5-1/2 | 0.88 |
| 12 | 12 | 4-3/4 | 0.88 | 20 | 8-3/4 | 1.25 | 16 | 6-3/4 | 1.13 |
| 1-1/2 | 4 | 2-3/4 | 0.50 | 4 | 4-1/4 | 0.75 | 4 | 3-1/2 | 0.75 |
| 14 | 12 | 5-1/4 | 1.00 | 20 | 9-1/4 | 1.38 | 20 | 7 | 1.13 |
| 20 | 20 | 6-1/4 | 1.13 | 24 | 11-1/4 | 1.63 | 24 | 8 | 1.25 |
| 1-1/4 | 4 | 2-3/4 | 0.50 | 4 | 3-3/4 | 0.63 | 4 | 3-1/4 | 0.63 |
| 24 | 20 | 6-3/4 | 1.25 | 24 | 13 | 1.88 | 24 | 9 | 1.50 |
Stockist of Alloy Steel A182 Grade Pipe Flanges & A182 Grade F5 Flanges Used in High Pressure Applications, View Weight Chart
EN
12CRMO195
WERKSTOFF NR.
1.7362
UNS
K41545
A182 F5 Cl1 Forged Flanges & F5 Chrome Moly Lap-Joint Flanges With Class 150 to Class 2500 Pressure Rating , Check Properties
| Property | Value |
|---|---|
| Young’s Modulus | 200 GPa |
| Density | 7.8 g/cm³ |
| Hardness | 180-240 HB |
| Poisson’s Ratio | 0.27-0.30 |
| Thermal Conductivity | 26.2 W/m·K |
| Specific Heat Capacity | 0.46 J/g·K |
| Poisson’s Ratio | 0.27-0.30 |
| Electrical Resistivity | 0.75 µΩ·m |
Elongation
20%
Tensile Strength
485 MPa, 70 KSI
Yield Strength
275 MPa, 40 KSI
Melting Point
2534-2624°F
| Property | ASTM A182 Grade F11 | ASTM A182 Grade F5 |
|---|---|---|
| Cost | Lower compared to F5 | Higher due to higher alloy content |
| Chemical Compositions | 1.25% Chromium, 0.5% Molybdenum | 5% Chromium, 0.5% Molybdenum |
| Corrosion Resistance | Oxidation resistance is moderate | Oxidation resistance is better |
| Temperature Resistance | Moderate resistance to high temperatures | Higher oxidation resistanceat high temperatures |
- ➤ Update Software: Keep firmware and patches current.
- ➤ Monitor System: Set up alerts for issues.
- ➤ Optimize Configurations: Balance loads and fine-tune settings.
- ➤ Backup & Recover: Regularly back up and have a recovery plan.
- ➤ Maintain Hardware: Keep in a clean, cool environment.
- ➤ Plan Capacity: Allocate resources and scale as needed.
- ➤ Ensure Security: Minimize exposure and use encryption.
- ➤ Health Checks: Perform routine assessments.
Regal Sales Corporation is a leading ASTM A182 Grade F5 Flange Manufacturer in India, known for producing high-quality flanges for various industrial applications, with delivery to countries including Italy, Oman, Spain, Qatar, Germany, Egypt, Malaysia, and the Netherlands.
| Process | Temperature | Purpose |
|---|---|---|
| Quenching | 899°C - 926°C | Increase strength and hardness |
| Annealing | 871°C - 926°C | Reduce stresses, Soften material |
| Tempering | 538°C - 593°C | Improve toughness, Reduce brittleness |
| Step | Description |
|---|---|
| Pre-Heating | Heat at 1,600°F - 2,000°F, softens material. |
| Finishing | Machining |
| Forging | To refine structure. |
| Cooling | Air-cooled or water-quenched for hardness. |
| Inspection | NDT and mechanical tests for quality. |
| Welding Technique | Details |
|---|---|
| SAW | Submerged Arc Welding |
| MIG Welding | Metal Inert Gas |
| SMAW | Shielded Metal Arc Welding |
| TIG Welding | Tungsten Inert Gas |
| FCAW | Flux-Cored Arc Welding |