ASTM A193 Grade B16 Bolts
ASME SA 193 B16 Nuts, Stud Bolts. Threaded Rod and Hex Bolts manufacturer in India
The B16 Set screws and other fasteners that are greater than M100 and up to M180 in diameter have 690MPa minimum tensile strength and 585MPa minimum yield strength. The SS A193 B16 Flange Bolts are used with inbuilt flanges. These flanges help the nuts to stay in place while fastening and after connection. The material is a chromium, molybdenum, vanadium alloy steel. Therefore the ASTM A193 Gr B16 Socket head cap screw is much corrosion resistant to general corrosive applications. There are different types of fasteners such as the SA-193-B16 lock Nuts which are used mostly in automobile wheels to make sure that the nuts don’t loosen due to high vibration. The ASTM A193 Grade B16 Bolts can be heat treated. The usual heat treatment is the quenched and tempered method. The A193 B16 Material needs to be heated to 860 degrees Celsius minimum to get the desired heat treated hardness. The B16 Nut Bolt is used in some of the high tensile and high stress applications such as power plants, boilers, railway tracks and others. The B16 Head Bolts are one of the special types. Each of the different type of bolts in this specification are used under high temperature, high pressure conditions. Regal Sales Corporation is a leading manufacturer and supplier of the different types such as the ASTM A193 Grade B16 Stud Bolts and nuts. As a leading manufacturer of the B16 Hex Head Bolts we supply them in all different sizes. Please contact us to know more about the different types of A193 b16 stainless steel bolts and to obtain a full price list.
ASTM A193 Grade B16 Stud Bolts
ASTM A193 B16 Nuts
ASTM A193 Grade B16 Bolts
Table of Content
- What Does ASTM A193 Grade B16 Bolts means ?
- ASTM A193 Grade B16 Stud Bolts Sizing Chart
- ASME SA193 B16 Heavy Hex Bolts Standard Dimensions
- ASTM A193 B16 Nuts Chemical Resistance Guide
- Mechanical Characteristics of SA 193 B16 Hex Bolts
- A193 Gr B16 Material selection and specification
- Standard Specificaion of Grade B16 Bolts
- Dimension Table of ASME SA193 B16 Heavy Hex Bolt
ASME SA 193 B16 Hex Nuts are made up of carbon, manganese, phosphorus, sulfur, chromium, molybdenum, vanadium and aluminum in the composition. One of the most used type is the SA 193 B16 Hex Bolts that are used for high strength and connection. The diameters of the ASTM A193 B16 Nuts range up to M100 for fasteners with 760MPa minimum tensile strength and 655MPa minimum yield strength.
Get A193 B16 Material, ASME SA 193 B16 Hex Nuts, SA 193 B16 Hex Bolts at affordable cost
| Diameter (D) | Body Diameter (D) | Across the Flats (F) | Across the Corners © | Head Height (H) | Thread Lengths (T) | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| MAX | MIN | MAX | MIN | MAX | MIN | MAX | MIN | 6” | 6” | |
| 5/8 | 0.642 | 0.605 | 1.062 | 1.031 | 1.227 | 1.175 | 0.444 | 0.378 | 1.5 | 1.75 |
| 3/4 | 0.768 | 0.729 | 1.25 | 1.212 | 1.443 | 1.383 | 0.524 | 0.455 | 1.75 | 2 |
| 7/8 | 0.895 | 0.852 | 1.438 | 1.394 | 1.66 | 1.589 | 0.604 | 0.531 | 2 | 2.25 |
| 1 1/8 | 1.149 | 1.098 | 1.812 | 1.756 | 2.093 | 2.002 | 0.78 | 0.658 | 2.5 | 2.75 |
| 1 1/4 | 1.277 | 1.223 | 2 | 1.938 | 2.309 | 2.209 | 0.876 | 0.749 | 2.75 | 3 |
| 1 1/2 | 1.531 | 1.47 | 2.375 | 2.3 | 2.742 | 2.622 | 1.036 | 0.902 | 3.25 | 3.5 |
| 1 3/4 | 1.785 | 1.716 | 2.75 | 2.662 | 3.175 | 3.035 | 1.196 | 1.054 | 3.75 | 4 |
| 2 | 2.039 | 1.964 | 3.125 | 3.025 | 3.608 | 3.449 | 1.388 | 1.175 | 4.25 | 4.5 |
| 2 1/4 | 2.305 | 2.214 | 3.5 | 3.388 | 4.041 | 3.862 | 1.548 | 1.327 | 4.75 | 5 |
| 2 3/4 | 2.827 | 2.711 | 4.25 | 4.112 | 4.907 | 4.688 | 1.869 | 1.632 | 5.75 | 6 |
| 3 | 3.081 | 2.961 | 4.625 | 4.475 | 5.34 | 5.102 | 2.06 | 1.815 | 6.25 | 6.5 |
| Chemicals | % Percentage |
| C. | 0.37 - 0.49% |
| Mn. | 0.65 - 1.10% |
| Si. | 0.15 - 0.35% |
| P. | 0.035%. |
| S. | 0.040% |
| Cr. | 0.75 - 1.20% |
| Ni. | -- |
| Mo. | 0.15 - 0.25% |
| Grade | Diameter | Tensile ksi, min | Yield, ksi, min | Elong, %, min | RA % min | HBW | HRC |
|---|---|---|---|---|---|---|---|
| B16 | Up to 2-1/2 | 125 | 105 | 18 | 50 | 321 max | 35 max |
| Over 2-1/2 to 4 | 110 | 95 | 17 | 45 | |||
| Over 4 to 8 | 100 | 85 | 16 | 45 |
| Additional Requirements | NACE MR0103/ MR0175/ ISO 15156 Compliance |
|---|---|
| Dimensions Standards | ASME B18.2.1, B18.3 |
| Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Threads Configuration | ASME B1.1 2A/3A Inch Unified Threads and B1.13M 6h Metric Coarse Threads |
| Mandatory Requirements | Free from Mercury & Radioactive Contamination |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Dealers & distributors are located | Port-of-Spain, Dammam, Khobar, Bangalore, Hyderabad, Vadodara, London, Rajkot, Karachi, Manama, Indore, Mexico, Baroda, Jamshedpur, Sydney, Bengaluru, Montreal, Thiruvananthapuram, Tau, Gujarat, Melbourne, Ahmedabad, Gimhae-si, Abu-Lagos, Ahvaz, Istanbul, Muscat, Pimpri-Chinchwad, Chennai, Calgary, Santiago, Kuwait, Ernakulam, Ludhiana, Surat, Ludhiana, Noida, Nagpur, Courbevoie, Coimbatore, Kanpur, Howrah, Riyadh, Janeiro, Caracas, Ranchi, Kolkata, Ankara, Bogota, Mumbai, Dhabi, Tehran, Perth, Gurgaon, Delhi |
- ASTM A193 / A193M – 16 : Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
- ASTM A1082 / A1082M – 16 : Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
- ASTM F2281 : Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications Designation
- ASTM A1014 / A1014M – 16 : Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
- ASTM A962 / A962M – 16a : Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
- ASTM A638 / A638M : Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
| Diameter (D) | Body Diameter (D) | Across the Flats (F) | Across the Corners © | Head Height (H) | Thread Lengths (T) | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| MAX | MIN | MAX | MIN | MAX | MIN | MAX | MIN | < 6” | > 6” | |
| 1/2 | 0.515 | 0.482 | 0.875 | 0.85 | 1.01 | 0.969 | 0.364 | 0.302 | 1.25 | 1.5 |
| 5/8 | 0.642 | 0.605 | 1.062 | 1.031 | 1.227 | 1.175 | 0.444 | 0.378 | 1.5 | 1.75 |
| 3/4 | 0.768 | 0.729 | 1.25 | 1.212 | 1.443 | 1.383 | 0.524 | 0.455 | 1.75 | 2 |
| 7/8 | 0.895 | 0.852 | 1.438 | 1.394 | 1.66 | 1.589 | 0.604 | 0.531 | 2 | 2.25 |
| 1 | 1.022 | 0.976 | 1.625 | 1.575 | 1.876 | 1.796 | 0.7 | 0.591 | 2.25 | 2.5 |
| 1 1/8 | 1.149 | 1.098 | 1.812 | 1.756 | 2.093 | 2.002 | 0.78 | 0.658 | 2.5 | 2.75 |
| 1 1/4 | 1.277 | 1.223 | 2 | 1.938 | 2.309 | 2.209 | 0.876 | 0.749 | 2.75 | 3 |
| 1 3/8 | 1.404 | 1.345 | 2.188 | 2.119 | 2.526 | 2.416 | 0.94 | 0.81 | 3 | 3.25 |
| 1 1/2 | 1.531 | 1.47 | 2.375 | 2.3 | 2.742 | 2.622 | 1.036 | 0.902 | 3.25 | 3.5 |
| 1 3/4 | 1.785 | 1.716 | 2.75 | 2.662 | 3.175 | 3.035 | 1.196 | 1.054 | 3.75 | 4 |
| 2 | 2.039 | 1.964 | 3.125 | 3.025 | 3.608 | 3.449 | 1.388 | 1.175 | 4.25 | 4.5 |
| 2 1/4 | 2.305 | 2.214 | 3.5 | 3.388 | 4.041 | 3.862 | 1.548 | 1.327 | 4.75 | 5 |
| 2 1/2 | 2.559 | 2.461 | 3.875 | 3.75 | 4.474 | 4.275 | 1.708 | 1.479 | 5.25 | 5.5 |
| 2 3/4 | 2.827 | 2.711 | 4.25 | 4.112 | 4.907 | 4.688 | 1.869 | 1.632 | 5.75 | 6 |
| 3 | 3.081 | 2.961 | 4.625 | 4.475 | 5.34 | 5.102 | 2.06 | 1.815 | 6.25 | 6.5 |