ASTM A193 Grade B8M Bolts and Studs
ASME SA 193 B8m Class 2 Bolts, A193 gr b8m stud material Manufacturer in India
There is 18% chromium, 8% nickel and up to 4% molybdenum in the composition of the ASTM A193 Grade B8m Threaded Rod and it provides the material with high strength, corrosion resistance and required toughness. The prices of the fasteners are comparatively lower. The ASTM A193 B8m Nut comes with a 515MPa minimum tensile strength and 205Mpa minimum yield strength. There are carbon, manganese, sulfur and silicon present in the material in smaller quantities as well. The ASTM A193 B8m Class 1 Bolts have slightly lower mechanical properties than the class 2 fasteners and are cheaper. There are different thread types to the fasteners such as fine and coarse threads. The A193 Gr B8m Material can be used to produce any type of thread and the different sizes of the fasteners based on the standards. The applications of these corrosion resistant ASME SA193 Grade B8m fasteners can be seen in sea water, marine, ship building and other corrosive applications. There are general corrosive applications and food grade applications that use these fasteners as well. There are super duplex and other alloy SA 193 Gr B8 Equivalent materials as well. Regal Sales Corporation is a leading manufacturer and supplier of the different types of ASTM A193 Grade B8M Bolts in various dimensions. Please feel free to contact us for any details such as the Sa 193 B8 Yield Strength, pricing, dimensions or a full product catalog.
ASTM A193 Grade B8m Bolts
ASTM A193 B8m Class 2 Bolts
ASTM A193 B8m stud bolts
Table of Content
- What Does ASTM A193 Grade B8m Bolts means ?
- ASTM A193 B8m Bolts Specifiaction
- Dimensions of ASTM A193 B8m bolts
- ASTM A193 B8m Class 2 Bolts Chemical Element
- ASTM A193 Grade B8m Threaded Rod Mechanical Properties Analysis
- Most Selling types of ASTM A193 b8m stud bolt
- Dimensions of ASTM A193 B8M Heavy Hex Bolt
- SA193 B8M Bolts Size Chart
- ASTM Specifications Grade B8m Bolts
ASTM A193 B8m Class 2 Bolts and class 1 bolts are made from the 316 austenitic stainless steel material. The dimensions of the bolts are governed by the ASME B18.2.1 and B18.3 standards. There are class 1 and class 2 bolts under this specification. The fasteners such as the B8M Stud are corrosion resistant to chloride ion stress corrosion cracking due to the molybdenum addition in the composition.
Dimensions |
ASME B18.2.1, B18.3 |
|---|---|
Melt Origin |
South America/East Europe/JapanKorea/ |
Product Origin |
Made in India |
Threads Configuration |
ASME B1.1 2A/3A Inch Unified Threads and B1.13M 6h Metric Coarse Threads |
Certification |
Dual Certified As per ASTM & ASME Codes |
Additional Certifications |
PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
Mandatory Requirements |
Free from Mercury & Radioactive Contamination |
Additional Requirements |
NACE MR0103 / MR0175 / ISO 15156 Compliance |
distributors are located in |
Janeiro, Jamshedpur, Thiruvananthapuram, Chennai, Tau, Gimhae-si, Santiago, Caracas, Khobar, Kolkata, Gurgaon, Manama, Istanbul, Gujarat, Bengaluru, Perth, Kanpur, Rajkot, Pimpri-Chinchwad, Dammam, Nagpur, Bogota, Abu-Lagos, Ludhiana, Calgary, Tehran, Baroda, Mexico, Ankara, Muscat, Bangalore, Sydney, Mumbai, Melbourne, Ernakulam, Surat, Montreal, Noida, Coimbatore, Howrah, Dhabi, Indore, London, Karachi, Courbevoie, Hyderabad, Ranchi, Kuwait, Port-of-Spain, Ahvaz, Ahmedabad, Riyadh, Vadodara, Ludhiana, Delhi |
| NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNEASTM A193 | ACROASTM A193 THE FLATS | ACROASTM A193 CORNERS | ||||
|---|---|---|---|---|---|---|---|---|
| D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
| m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
| m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
| m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
| m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
| m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
| m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
| m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
| m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
| m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
Get B8M Strain Hardened and SA 193 B8M Yield Strength, A193 Gr B8m Material, ASTM A193 b8m bolts specification
| Element | B8M (AISI 316) |
|---|---|
| Carbon | 0.08% max |
| Manganese | 2.00% max |
| Phosphorus, max | 0.045% |
| Sulfur, max | 0.030% |
| Silicon | 1.00% max |
| Chromium | 16.0 – 18.0% |
| Nickel | 10.0 – 14.0% |
| Molybdenum | 2.00 – 3.00% |
| Grade | Size | Tensile ksi, min | Yield, ksi, min | Elong, %, min | RA % min | HBW | HRC |
|---|---|---|---|---|---|---|---|
| B8M Class 1 | All | 75 | 30 | 30 | 50 | 223 max | 96 max |
| B8M Class 2 | Up to 3/4 | 110 | 95 | 15 | 45 | 321 max | 35 max |
| 7/8 - 1 | 100 | 80 | 20 | 45 | |||
| 1-1/8 - 1-1/4 | 95 | 65 | 25 | 45 | |||
| 1-3/8 - 1-1/2 | 90 | 50 | 30 | 45 |
| Stud bolt Grade b8m | ASTM A193 B8m heavy hex bolt |
| Hex Nut b8m | ASTM A193 B8m washer |
| B8m cl2 stud | ASTM A193 b8m nut |
| A193 B8M Square Nuts | SA193 B8M Heavy Hex Nuts |
| ASTM A193 Grade B8M Double Ended Studs | A193 B8M Spring Washers |
| ASTM A193 Gr. B8M Split Washers | ASTM A193 Grade B8M Lock Nut |
| B8M T Bolts | SA193 B8M Hex Bolts |
| ASTM A193 Eye Bolts | ASTM A193 Grade B8M Countersunk Bolts |
| Diameter (D) | Body Diameter (D) | Across the Flats (F) | Across the Corners © | Head Height (H) | Thread Lengths (T) | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| MAX | MIN | MAX | MIN | MAX | MIN | MAX | MIN | < 6” | > 6” | |
| 1/2 | 0.515 | 0.482 | 0.875 | 0.85 | 1.01 | 0.969 | 0.364 | 0.302 | 1.25 | 1.5 |
| 5/8 | 0.642 | 0.605 | 1.062 | 1.031 | 1.227 | 1.175 | 0.444 | 0.378 | 1.5 | 1.75 |
| 3/4 | 0.768 | 0.729 | 1.25 | 1.212 | 1.443 | 1.383 | 0.524 | 0.455 | 1.75 | 2 |
| 7/8 | 0.895 | 0.852 | 1.438 | 1.394 | 1.66 | 1.589 | 0.604 | 0.531 | 2 | 2.25 |
| 1 | 1.022 | 0.976 | 1.625 | 1.575 | 1.876 | 1.796 | 0.7 | 0.591 | 2.25 | 2.5 |
| 1 1/8 | 1.149 | 1.098 | 1.812 | 1.756 | 2.093 | 2.002 | 0.78 | 0.658 | 2.5 | 2.75 |
| 1 1/4 | 1.277 | 1.223 | 2 | 1.938 | 2.309 | 2.209 | 0.876 | 0.749 | 2.75 | 3 |
| 1 3/8 | 1.404 | 1.345 | 2.188 | 2.119 | 2.526 | 2.416 | 0.94 | 0.81 | 3 | 3.25 |
| 1 1/2 | 1.531 | 1.47 | 2.375 | 2.3 | 2.742 | 2.622 | 1.036 | 0.902 | 3.25 | 3.5 |
| 1 3/4 | 1.785 | 1.716 | 2.75 | 2.662 | 3.175 | 3.035 | 1.196 | 1.054 | 3.75 | 4 |
| 2 | 2.039 | 1.964 | 3.125 | 3.025 | 3.608 | 3.449 | 1.388 | 1.175 | 4.25 | 4.5 |
| 2 1/4 | 2.305 | 2.214 | 3.5 | 3.388 | 4.041 | 3.862 | 1.548 | 1.327 | 4.75 | 5 |
| 2 1/2 | 2.559 | 2.461 | 3.875 | 3.75 | 4.474 | 4.275 | 1.708 | 1.479 | 5.25 | 5.5 |
| 2 3/4 | 2.827 | 2.711 | 4.25 | 4.112 | 4.907 | 4.688 | 1.869 | 1.632 | 5.75 | 6 |
| 3 | 3.081 | 2.961 | 4.625 | 4.475 | 5.34 | 5.102 | 2.06 | 1.815 | 6.25 | 6.5 |
- ASTM A193 / A193M – 16 : Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
- ASTM A1082 / A1082M – 16 : Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
- ASTM F2281 : Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications Designation
- ASTM A1014 / A1014M – 16 : Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
- ASTM A962 / A962M – 16a : Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
- ASTM A638 / A638M : Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service