ASTM F468 Fasterners
ASTM F468 Alloy 400 Hex Bolts, Screw and F468 UNS N06625 Anchor Bolt manufacturer in India
The ASTM F468 Material can be copper alloys, Monel 400, 405 and K500, Inconel 625, titanium grades and other aluminum alloys as well. These are formed, stress relieved, solution annealed, aged, stabilized or naturally aged depending on the material composition of the grade. The ASTM F468 Anchor Bolt is used to anchor load bearing components to solid structures and concrete structures. These fasteners get different tensile and yield strengths based on the material they are made from. The ASTM F468 Flange Bolt is a type of bolt made with a flange next to the head so that the bolt is kept in place without slipping from the bolt hole. There are different test methods for different material types as well. The ASTM F468 Alloy 400 Nuts are some of the most common nuts from this specification. The thread length of the fasteners varies as well. For bolts less than 2 inches, it has to be within 2 threads of the head. Regal Sales Corporation is a leading manufacturer and supplier of the different types of ASTM F468 Fasteners in different grades of materials. Please feel free to contact us for more information and pricing of the different types such as the ASTM F468 Studs.
ASTM F468 Anchor Bolt
ASTM F468 Fasterners
ASTM F468 Bolts
Table of Content
ASTM F468 Screw is a type of fastener that could be made from various types of materials. The specification covers various wrought non – ferrous bolts, stud bolts, screws and others ranging from ¼ inches to 1 ½ inches in diameter. The fasteners are made with coarse and fine thread types.
Ready stock of ASTM F468 Screw and ASTM F468 Studs for instant delivery
| Alloy Group | Alloy Designation | Alloy Type |
|---|---|---|
| 1 | 303, 304, 304L, 305, 384, XM1, 18-9LW, 302HQ, 303Se | Austenitic |
| 2 | 316, 316L | Austenitic |
| 3 | 321, 347 | Austenitic |
| 4 | 430, 430F | Ferritic |
| 5 | 410, 416, 416Se | Martensitic |
| 6 | 431 | Martensitic |
| 7 | 630 (17-4) | Precipitation Hardening |
Looking for ASTM F468 Bolts, ASTM F468 Flange Bolt Supplier Specialist ?
| Alloy Group | Condition | Marking | Diameter Range | Tensile, ksi | Yield, ksi min | Rockwell Hardness |
|---|---|---|---|---|---|---|
| 1 | AF | F468A | 1/4 to 1-1/2 | 65 to 85 | 20 | B85 max |
| A | F468B | 1/4 to 1-1/2 | 75 to 100 | 30 | B65 to 95 | |
| CW1 | F468C | 1/4 to 5/8 | 100 to 150 | 65 | B95 to C32 | |
| CW2 | F468D | 3/4 to 1-1/2 | 85 to 140 | 45 | B80 to C32 | |
| 2 | AF | F468E | 1/4 to 1-1/2 | 65 to 85 | 20 | B85 max |
| A | F468F | 1/4 to 1-1/2 | 75 to 100 | 30 | B65 to 95 | |
| CW1 | F468G | 1/4 to 5/8 | 100 to 150 | 65 | B95 to C32 | |
| CW2 | F468H | 3/4 to 1-1/2 | 85 to 140 | 45 | B80 to C32 |
Mail us for F468 UNS N04400 Stud, ASTM F468 Fasteners Sizes, Specifications and ASTM F468 Grade 5 Dimensions
| Element, max except as shown | Alloy Group 1, Type 304 | Alloy Group 2, Type 316 |
|---|---|---|
| Carbon | 0.08% | 0.08% |
| Manganese | 2.00% | 2.00% |
| Phosphorus | 0.045% | 0.045% |
| Sulfur | 0.030% | 0.030% |
| Silicon | 1.00% | 1.00% |
| Chromium | 18.0 to 20.0% | 16.0 to 18.0% |
| Nickel | 8.0 to 10.5% | 10.0 to 14.0% |
| Copper | 1.00% | |
| Molybdenum | 2.00 to 3.00% |
ASTM F468 Material Manufacturers in india, Ask for free sample of ASTM F468 UNS N06625 Threaded Rod, ASTM F468 Nuts
| NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNEASTM F468 | ACROASTM F468 THE FLATS | ACROASTM F468 CORNERS | ||||
|---|---|---|---|---|---|---|---|---|
| D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
| m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
| m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
| m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
| m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
| m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
| m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
| m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
| m56 | 56.00 | 55.26 | 36.2 | 33.80 | 85.00 | 82.20 | 98.15 | 93.71 |
| m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
| m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
| m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
| m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
| Diameter (D) | Body Diameter (D) | Across the Flats (F) | Across the Corners © | Head Height (H) | Thread Lengths (T) | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| MAX | MIN | MAX | MIN | MAX | MIN | MAX | MIN | < 6” | > 6” | |
| 1/2 | 0.515 | 0.482 | 0.875 | 0.85 | 1.01 | 0.969 | 0.364 | 0.302 | 1.25 | 1.5 |
| 5/8 | 0.642 | 0.605 | 1.062 | 1.031 | 1.227 | 1.175 | 0.444 | 0.378 | 1.5 | 1.75 |
| 3/4 | 0.768 | 0.729 | 1.25 | 1.212 | 1.443 | 1.383 | 0.524 | 0.455 | 1.75 | 2 |
| 7/8 | 0.895 | 0.852 | 1.438 | 1.394 | 1.66 | 1.589 | 0.604 | 0.531 | 2 | 2.25 |
| 1 | 1.022 | 0.976 | 1.625 | 1.575 | 1.876 | 1.796 | 0.7 | 0.591 | 2.25 | 2.5 |
| 1 1/8 | 1.149 | 1.098 | 1.812 | 1.756 | 2.093 | 2.002 | 0.78 | 0.658 | 2.5 | 2.75 |
| 1 1/4 | 1.277 | 1.223 | 2 | 1.938 | 2.309 | 2.209 | 0.876 | 0.749 | 2.75 | 3 |
| 1 3/8 | 1.404 | 1.345 | 2.188 | 2.119 | 2.526 | 2.416 | 0.94 | 0.81 | 3 | 3.25 |
| 1 1/2 | 1.531 | 1.47 | 2.375 | 2.3 | 2.742 | 2.622 | 1.036 | 0.902 | 3.25 | 3.5 |
| 1 3/4 | 1.785 | 1.716 | 2.75 | 2.662 | 3.175 | 3.035 | 1.196 | 1.054 | 3.75 | 4 |
| 2 | 2.039 | 1.964 | 3.125 | 3.025 | 3.608 | 3.449 | 1.388 | 1.175 | 4.25 | 4.5 |
| 2 1/4 | 2.305 | 2.214 | 3.5 | 3.388 | 4.041 | 3.862 | 1.548 | 1.327 | 4.75 | 5 |
| 2 1/2 | 2.559 | 2.461 | 3.875 | 3.75 | 4.474 | 4.275 | 1.708 | 1.479 | 5.25 | 5.5 |
| 2 3/4 | 2.827 | 2.711 | 4.25 | 4.112 | 4.907 | 4.688 | 1.869 | 1.632 | 5.75 | 6 |
| 3 | 3.081 | 2.961 | 4.625 | 4.475 | 5.34 | 5.102 | 2.06 | 1.815 | 6.25 | 6.5 |
