Australian Flanges
Australian Flanges are flanges made under the Australian standards and specifications. There are all different types and material grades of these flanges under Australian standards. The Australian Standard Puddle Flange involves a gasket to fit the flange puddles. These flanges come in different dimensions such as ASME B16.5, B16.47 and other international dimensions as well.
Australian Flange
Australian Standard Pipe Flange
Australian Blind Flange
The Australian Standard Flange can range from ½ inches to 48 inches in size or from 15NB to 1200NB. There are different pressure capacities of the flanges ranging from 6Bar to 40Bar or from PN6 through Pn64. These pressure capacities of the flanges are also classified as pressure classes ranging from 150 through 2500. The Australian Standard Pipe Flanges can be made as forged, threaded, screwed or plate flanges. The flanges also have flat face, raised face and ring type joint face types. There are different supporting materials such as ring joint, flange bolt and gaskets in these flanges. The flange type can vary as socket weld, threaded ring, weld neck, slip on, lap joint and blind flanges. All flange types connect two components together where the Australian Blind Flanges end a connection. These are installed at the end of a pipeline to terminate the line. The blind flanges are useful in maintenance systems and in sludge removal. The Australian Standard Table D Flange includes the dimensions and properties of the flanges that are used in various industries such as water supply, oil and gas, petroleum, petrochemical, food processing, power generation, heat exchanger and marine engineering applications.
Table of Content
| Australian Flanges Size Chart | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
|---|---|
| Production technique |
|
| Connect Type/ Flange Face Type | Raised Face (RF), Flat Face (FF), Ring Type Joint (RTJ), Large Male-Female (LMF), Small Male-Female (SMF), Lap-Joint Face (LJF), Small Tongue, Large Tongue & Groove, , Groove |
| Special design | As per your drawing AS, ANSI, BS, DIN and JIS |
| Test | Direct-reading Spectrograph, X-ray detector, UI trasonic flaw detector, Hydrostatic testing machine, Magnetic particle detector |
| Equipment | Press machine, electric bevelling machine, Bending machine, Pushing Machine, Sand-blasting machine etc |
| Australian Flanges Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, BS, DIN, EN, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, ANSI, BS1560-3.1, API7S-15, ASME, MSS S44, ISO70051, JISB2220, API7S-43, API605, EN1092 |
| Origin | Indian / West Europe / Japan / USA / Korean |
| Manufacturer of | ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. |
| Australian Flange Uses & application |
|
| Australian Flanges Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| Australian Flanges Pressure Calculation in DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
| JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
| UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Coating | Oil Black Paint, Zinc Plated, Anti-rust Paint, Yellow Transparent, Cold and Hot Dip Galvanized |
| Most common types of Australian | Forged / Screwed / Threaded / Plate |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Export to | Ireland, Saudi Arabia, Singapore, Indonesia, Ukraine, Spain, Canada, USA, Brazil, India, Egypt, Oman, Thailand, Korea, Iran, Dubai, Peru, etc |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Stainless Steel Australian Orifice flange
Carbon Steel Australian BLRF flange
Alloy Steel Australian WN flange
Malleable Iron Australian RTJ flange
ASTM A105 Australian SWRF flange
ASTM A694 F60 Australian SORF flange
Titanium Australian Class 300
ASME SA105N Australian PN16 flange
Copper Australian B16.47 flange
ASTM A694 F42 Australian Pn10 flange
Duplex Steel Australian Flat Face flange
Copper Nickel Australian Lapped Joint Flange
| ASME/ANSI B 16.36 | Welding Neck Flange, Slip on Flange, Threaded Flange |
| PRESSURE CLASS | 300, 400, 600, 900, 1500, 2500 |
| ASME/ANSI B 16.5 | Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| ASME/ANSI B 16.47 | Welding Neck Flange, Blind Flange [Series A & B] |
| PRESSURE CLASS | 75, 150, 300, 400, 600, 900 |
| BS 4504 SEC 3.1 | Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange |
| PRESSURE CLASS | PN 2.5 TO PN 40 |
| BS 4504[PART 1] | Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange |
| PRESSURE CLASS | PN 2.5 TO PN 400 |
| BS 1560 BOSS | Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| BS10 | Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange |
| TABLE | D, E, F, H |
| DIN FLANGES | DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 |
| PRESSURE CLASS | PN 6 TO PN 100 |
| Standard | Class | Diameter | Bolt Circle Diameter | Number of Bolts | Bolt Size | Diameter of Bolt Hole |
|---|---|---|---|---|---|---|
| AS4087 | PN14 | 95 | 67 | 4 | M12 | 14 |
| AS 2129 | Table C | 95 | 67 | 4 | 13 | 14 |
| Table D | 95 | 67 | 4 | 13 | 14 | |
| Table E | 95 | 67 | 4 | 13 | 14 | |
| Table F | 95 | 67 | 4 | 13 | 14 | |
| Table H | 114 | 83 | 4 | 16 | 17 | |
| Table J | 114 | 83 | 4 | 16 | 17 | |
| ANSI B16.5 | ANSI 150 | 89 | 60 | 4 | 13 | 16 |
| ANSI 300 | 95 | 67 | 4 | 13 | 16 | |
| ANSI 600 | 95 | 67 | 4 | 13 | 16 | |
| ANSI 900 | 121 | 83 | 4 | 19 | 22 | |
| ANSI 1500 | 121 | 83 | 4 | 19 | 22 | |
| Australian (DIN) | PN6 | 80 | 55 | 4 | M10 | 11 |
| PN10 | 95 | 65 | 4 | M12 | 14 | |
| PN16 | 95 | 65 | 4 | M12 | 14 | |
| PN20 | 90 | 60.5 | 4 | M14 | 16 | |
| PN25 | 95 | 65 | 4 | M12 | 14 | |
| PN40 | 95 | 65 | 4 | M12 | 14 |
| Copper Nickel AS/NZS 4331.1 | ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640 |
|---|---|
| Brass AS/NZS 4331.1 | 3602 / 2604 / H59 / H62 / etc. |
| Alloy 20 AS/NZS 4331.1 | ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3 |
| Aluminium AS/NZS 4331.1 | 5052 /6061/ 6063 / 2017 / 7075 / etc. |
| Monel AS/NZS 4331.1 | ASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500) |
| Duplex AS/NZS 4331.1 | S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
| Super Duplex AS/NZS 4331.1 | S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
| Alloy Steel AS/NZS 4331.1 | ASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91 |
| Titanium AS/NZS 4331.1 | ASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7 ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5 |
| Copper AS/NZS 4331.1 | T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc |
| Carbon Steel AS/NZS 4331.1 | ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80) |
| Stainless Steel AS/NZS 4331.1 | ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409 |
| Nickel AS/NZS 4331.1 | ASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC |
| Inconel AS/NZS 4331.1 | ASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750 AS/NZS 4331.1 |
| Hastelloy AS/NZS 4331.1 | ASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X |
| Nimonic AS/NZS 4331.1 | Nimonic 75, Nimonic 80A, Nimonic 90 |
| Other AS/NZS 4331.1 material | Tin bronze, Aluminum bronze, Lead bronze |
| Incoloy AS/NZS 4331.1 | ASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 |
| 254 Smo AS/NZS 4331.1 | ASTM A182 / ASME SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547 |