Duplex 2205 Flanges
Manufacturer of ASTM A182 UNS S31803 Blind Flanges in India, Exceptional Sizes
Duplex steel S32205 blind flanges have good yield strength and corrosion resistance is excellent. Apart from this, there are many other properties because of which the product is highly in demand in the market. Various other grades of this product are available and is manufactured in stock.
Duplex Steel 2205 Plate Flanges is usually a type of plate or ring which is used to cover or close the end of a pipe. These are cost effective and it reduces the thickness. This is used in various other applications such as mechanical, chemical and many other industries. Duplex Steel S32205 Slip On Flange is placed over the pipe which extends from the end of the pipe and based on the inside diameter. The outer diameter is also welded on the back side of the flange.
This product is thus used in many other applications. Duplex Steel 2205 Flat Face Flange is manufactured by using supreme quality and is high in demand in the market. Duplex Steel 2205 Spectacle Blind Flange is used to stop one end of the pipe flow and is thus used in many other applications. This is manufactured by many of the steel companies in India, but Regal Sales Corporation is the leading and reputed one that manufactures this product on large scale and is supplied to many other countries.
Duplex 2205 Flanges Supplier in India offers the most common types with high strength and corrosion resistance. Supplies in Various Countries Like Qatar, Dubai, Oman, Lebanon, Turkey, Malaysia, Belgium, Germany, Netherlands etc
Duplex 2205 Flanges
Duplex UNS S32205 Slip On Flange
Duplex SS UNS S32205 Blind Flange
Table of Content
- What is Duplex 2205 Flanges?
- S32205 Duplex Flanges Specification Chart
- 2205 Duplex Stainless Steel Flanges Types
- Weight Chart of SAF 2205 Duplex Stainless Steel Flanges
- Size Chart of duplex 2205 Din 1.4462 Flanges
- Duplex Steel Flange Pressure Rating
- Heat Resistance of Duplex 2205 Flanges
- Mechanical Properties Chart of saf 2205 Flanges
- Alloy 2205 Reducing Flange Physical Properties
- Chemical Properties of SA 182 Type 2205 Flanges
- Equivalent material grade of 1.4462 duplex 2205 Flanges
- Thermal Conductivity of DSS 2205 Flange
- Thickness Calculation Duplex Steel Flange
Duplex 2205 Flanges is also known for its socket weld flanges and is usually used for small high pressure piping system. The raw material used is of high quality and is installed by welding around the hub of the flanges. This is used in various industries like steel, mechanical, chemical and many other allied industries. Duplex steel flanges manufacturers are found in numbers and thus they are hugely available in the market. Regal Sales Corporation is the leading and reputed one which deals with this product and the prices of this is also affordable. Our team is good enough to manage the complete manufacturing process.
Get SAF 2205 Socket Weld Flanges Provide Good Weldability & Formability, Check Specifications
Size
- PN 2.5 – PN 400
- 15NB – 1500NB
- NPS: ½ inch - 48 inch
Features
- Higher Endurance
- Robust Material
- Sizes Availabilities
- Corrosion Resistants
Applications
- Wastewater Plants
- Nuclear Plants
- Marine
- Chemical Industry
Thickness
- Schedule 160/ 180
- Schedule 10/ 20/ 40
- Schedule 60/ 80/ 100
- Schedule 120/ 140
Finishing
- Spiral serrated
- Cold water finish
- Smooth finish
- Mirror , Serrated finish
- Stock finish
- Concentric serrated
Testing Methods
- Tensile test
- Impact test
- Hardness test
- PMI test
Disadvantages
- Expensive
- Heat Sensitive
- Flexibility Reduced
Pressure
- CL 1500 To 2500
- CL 600 To 900
- CL 300 To 400
- CL 125 To 150
Threads type
- BSP,NPT
- FPT
- MPT/ BSPT (Female)
- BSPP, MNPT
Surface Coating
- Teflon, Xylan, Zinc
- Black Oxide
- Cadmium, Galvanized
- Others Upon Request
Standard
- ASME B16.5 : 1/2″ To 24″
- ASME B16.47 : 24″ To 60″
- ASME B16.36 : 2″ To 24″
- ASME B16.48 : 2″ To 24″
Connections
- TH (Threaded)
- Welding (Welded)
Packaging Methods
- Plastic
- Wooden
- Carton
Production process
- Casting
- Forging
- Plating
Certification
- 100% Radiography Test
- NACE MR0175
- MTC BS EN 10204 3.1/ 3.2
- Third Party Inspection
2205 Duplex Slip On Flange
Duplex Stainless Steel 2205 Socket Weld Flange
Alloy 2205 Threaded Flange
Duplex 2205 Stainless Steel Lap Joint Flange
Duplex SS 2205 Forged Flange
Duplex Type 2205 Plate Flange
ASTM A182 Type 2205 Blind Flange
ASTM A182 duplex 2205 Weld Neck Flange
Duplex Steel 2205 RTJ Flange
Duplex Alloy 2205 BLRF Flange
Duplex 2205 Steel Reducing Flange
Duplex 2205 Alloy Raised Face Flange
2205 Stainless Steel SORF Flange
2205 Duplex Stainless Steel WNRF Flange
Duplex 2205 Steel LWNRF Flange
Duplex 2205 Alloy Orifice Flange
ANSI B16.5 Class 150 UNS S32205 Blind Flanges Includes Various Dimensions, Check Size & Dimension Chart
|
Standard |
Class |
Diameter |
Bolt Circle Diameter |
Number of Bolts |
Bolt Size |
Diameter of Bolt Hole |
|---|---|---|---|---|---|---|
|
AS4087 Flanges |
PN14 |
95 |
67 |
4 |
M12 |
14 |
|
AS 2129 Flange
|
Table C |
95 |
67 |
4 |
13 |
14 |
|
Table D |
95 |
67 |
4 |
13 |
14 |
|
|
Table E |
95 |
67 |
4 |
13 |
14 |
|
|
Table F |
95 |
67 |
4 |
13 |
14 |
|
|
Table H |
114 |
83 |
4 |
16 |
17 |
|
|
Table J |
114 |
83 |
4 |
16 |
17 |
|
|
ANSI B16.5
|
ANSI 150 |
89 |
60 |
4 |
13 |
16 |
|
ANSI 300 |
95 |
67 |
4 |
13 |
16 |
|
|
ANSI 600 |
95 |
67 |
4 |
13 |
16 |
|
|
ANSI 900 |
121 |
83 |
4 |
19 |
22 |
|
|
ANSI 1500 |
121 |
83 |
4 |
19 |
22 |
|
|
ISO 7005 (DIN) Flange
|
PN6 |
80 |
55 |
4 |
M10 |
11 |
|
PN10 |
95 |
65 |
4 |
M12 |
14 |
|
|
PN16 |
95 |
65 |
4 |
M12 |
14 |
|
|
PN20 |
90 |
60.5 |
4 |
M14 |
16 |
|
|
PN25 |
95 |
65 |
4 |
M12 |
14 |
|
|
PN40 |
95 |
65 |
4 |
M12 |
14 |
Duplex 2205 Flanges Manufacturer in India offers a flanges in various Sizes
| Nominal Size |
Outside Diameter (OD) |
Min. Thickness (T) |
RF Dia. (R) |
No. of Bolt Holes | Diameter of Holes |
Bolt Circle (BC) |
SO Bore ID (SB) |
WN Bore ID (WB) |
Dia. Hub Base (HB) |
Dia. of Hub Top (HT) |
SO LTH (SL) |
WN LTH (WL) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1⁄2 | 3.50 | 0.38 | 1.38 | 4 | 0.62 | 2.38 | 0.88 | 0.62 | 1.19 | 0.84 | 0.56 | 1.81 |
| 3⁄4 | 3.88 | 0.44 | 1.69 | 4 | 0.62 | 2.75 | 1.09 | 0.82 | 1.50 | 1.05 | 0.56 | 2.00 |
| 1 | 4.25 | 0.50 | 2.00 | 4 | 0.62 | 3.12 | 1.36 | 1.05 | 1.94 | 1.32 | 0.62 | 2.12 |
| 11⁄4 | 4.62 | 0.56 | 2.50 | 4 | 0.62 | 3.50 | 1.70 | 1.38 | 2.31 | 1.66 | 0.75 | 2.19 |
| 11⁄2 | 5.00 | 0.62 | 2.88 | 4 | 0.62 | 3.88 | 1.95 | 1.61 | 2.56 | 1.90 | 0.81 | 2.38 |
| 2 | 6.00 | 0.69 | 3.62 | 4 | 0.75 | 4.75 | 2.44 | 2.07 | 3.06 | 2.38 | 0.94 | 2.44 |
| 21⁄2 | 7.00 | 0.81 | 4.12 | 4 | 0.75 | 5.50 | 2.94 | 2.47 | 3.56 | 2.88 | 1.06 | 2.69 |
| 3 | 7.50 | 0.88 | 5.00 | 4 | 0.75 | 6.00 | 3.57 | 3.07 | 4.25 | 3.50 | 1.12 | 2.69 |
| 31⁄2 | 8.50 | 0.88 | 5.50 | 8 | 0.75 | 7.00 | 4.07 | 3.55 | 4.81 | 4.00 | 1.19 | 2.75 |
| 4 | 9.00 | 0.88 | 6.19 | 8 | 0.75 | 7.50 | 4.57 | 4.03 | 5.31 | 4.50 | 1.25 | 2.94 |
| 5 | 10.00 | 0.88 | 7.31 | 8 | 0.88 | 8.50 | 5.66 | 5.05 | 6.44 | 5.56 | 1.38 | 3.44 |
| 6 | 11.00 | 0.94 | 8.50 | 8 | 0.88 | 9.50 | 6.72 | 6.07 | 7.56 | 6.63 | 1.50 | 3.44 |
| 8 | 13.50 | 1.06 | 10.62 | 8 | 0.88 | 11.75 | 8.72 | 7.98 | 9.69 | 8.63 | 1.69 | 3.94 |
| 10 | 16.00 | 1.12 | 12.75 | 12 | 1.00 | 14.25 | 10.88 | 10.02 | 12.00 | 10.75 | 1.88 | 3.94 |
| 12 | 19.00 | 1.19 | 15.00 | 12 | 1.00 | 17.00 | 12.88 | 12.00 | 14.38 | 12.75 | 2.12 | 4.44 |
| 14 | 21.00 | 1.31 | 16.25 | 12 | 1.12 | 18.75 | 14.14 | 13.25 | 15.75 | 14.00 | 2.19 | 4.94 |
| 16 | 23.50 | 1.38 | 18.50 | 16 | 1.12 | 21.25 | 16.16 | 15.25 | 18.00 | 16.00 | 2.44 | 4.94 |
| 18 | 25.00 | 1.50 | 21.00 | 16 | 1.25 | 22.75 | 18.18 | 17.25 | 19.88 | 18.00 | 2.62 | 5.44 |
| 20 | 27.50 | 1.62 | 23.00 | 20 | 1.25 | 25.00 | 20.20 | 19.25 | 22.00 | 20.00 | 2.81 | 5.62 |
| 22 | 29.50 | 1.75 | 25.25 | 20 | 1.38 | 27.25 | 22.22 | 21.25 | 24.25 | 22.00 | 3.07 | 5.82 |
| 24 | 32.00 | 1.81 | 27.25 | 20 | 1.38 | 29.50 | 24.25 | 23.25 | 26.12 | 24.00 | 3.19 | 5.94 |
| Temp. ℃ | -29 to 38 | 50 | 100 | 150 | 200 | 250 | 300 | |
|---|---|---|---|---|---|---|---|---|
| Pressure-temperature rating for ASME B16.47 by class, bar | 75 | 10.0 | 9.8 | 8.8 | 7.9 | 6.9 | 6 | 5.1 |
| 150 | 20 | 19.5 | 17.7 | 15.8 | 13.8 | 12.1 | 10.2 | |
| 300 | 51.7 | 51.7 | 50.7 | 45.9 | 42.7 | 40.5 | 38.9 | |
| 400 | 68.9 | 68.9 | 67.5 | 61.2 | 56.9 | 53.9 | 51.8 | |
| 600 | 103.4 | 103.4 | 101.3 | 91.9 | 85.3 | 80.9 | 77.7 | |
| 900 | 155.1 | 155.1 | 152 | 137.8 | 128 | 121.4 | 116.6 | |
| Temp, ℃ | -29 to 38 | 50 | 100 | 150 | 200 | 250 | 300 | |
|---|---|---|---|---|---|---|---|---|
| Pressure-temperature rating for ASME B16.5 by class, bar | 150 | 20.0 | 19.5 | 17.7 | 15.8 | 13.8 | 12.1 | 10.2 |
| 300 | 51.7 | 51.7 | 50.7 | 45.9 | 42.7 | 40.5 | 38.9 | |
| 400 | 68.9 | 68.9 | 67.5 | 61.2 | 56.9 | 53.9 | 51.8 | |
| 600 | 103.4 | 103.4 | 101.3 | 91.9 | 85.3 | 80.9 | 77.7 | |
| 900 | 155.1 | 155.1 | 152 | 137.8 | 128 | 121.4 | 116.6 | |
| 1500 | 258.6 | 258.6 | 253.3 | 229.6 | 213.3 | 202.3 | 194.3 | |
| 2500 | 430.9 | 430.9 | 422.2 | 382.7 | 355.4 | 337.2 | 323.8 | |
| Property | Value |
|---|---|
| Maximum Intermittent Temperature | Up to 300°C (572°F) |
| Maximum Continuous Temperature | Up to 250°C (482°F) |
| Thermal Expansion Coefficient | 13.7 x 10⁻⁶ /°C (20-100°C) |
| Thermal Conductivity | 19 W/m·K (at 20°C) |
| Density | 7.8 g/cm³ |
| Melting Range | 1350–1400°C (2462–2552°F) |
Find Werkstoff No 1.4462 Weld Neck Flange with Mirror Finish / Cold Water Finish, Check Mechanical Properties
Duplex 2205 Flanges Manufacturer in India provides flanges with exceptional mechanical properties
Yield Strength
65 Ksi, 450 Mpa
Tensile Strength
90 ksi, 620 MPa
Melting Point
2462 – 2552°F
Elongation
25 – 40 %
| Property | Value |
|---|---|
| Density | 7.8 g/cm³ |
| Hardness | 200–300 HV |
| Melting Point | 1400°C to 1450°C |
| Thermal Conductivity | 14–16 W/m·K |
| Thermal Expansion | 16–18 µm/m·K |
| Modulus of Elasticity | 200 GPa |
Get Duplex SAF 2205 Flanges & S32205 Flanges With Welded & Threaded Types Of Connection, Check Chemical Composition
UNS
S32205
WERKSTOFF NR.
1.4462
| Property | Value | Conditions |
|---|---|---|
| Thermal Conductivity | 19 W/m·K | At 20°C (68°F) |
| 21 W/m·K | At 100°C (212°F) | |
| 25 W/m·K | At 500°C (932°F) |
t= [P⋅D/2⋅(S⋅E−P)]+c
Where:
- t = Required flange thickness (mm or inches)
- P = Design pressure (MPa or psi)
- D = Outer diameter of flange (mm or inches)
- S = Allowable stress of material (MPa or psi)
- E = Weld joint efficiency (usually 1 for seamless flanges)
- C = Corrosion allowance (mm or inches)