Duplex UNS S32205/ F60 Fasteners belong to ASTM A182 and A479 specifications. These are specifications for high pressure and high temperature applications. The material grade is UNS S32205 F60. There are different dimensions such as ASME, DIN and ISO standards. The ASTM A1082 UNS S32205 Screw can come in different types with different thread types. The thread configurations are according to the ASME and other thread configuration standards. These UNS S32205 Bolt and nuts are made through cold forging, hot forging, bar stock machining and bar stock milling procedures.
UNS S32205 Fasteners
ASTM A182 F60 Duplex S32205 Bolts
UNS S32205 F60 Structural Bolt
Each procedure derives a different type of fastener with unique advantages. The UNS S32205 F60 Fixings Fasteners have sizes ranging from M6 to M100 and length ranging from 10mm to 100mm. The material is made up of 21% chromium, 4.5% nickel, carbon, manganese, silicon, phosphorus, sulfur, nitrogen and iron in the composition. This composition provides the Duplex S32205 Hex Head Bolt with high mechanical properties. The material has 800MPa minimum tensile strength and 550MPa minimum yield strength. The elongation at break is 15% and the material also has high melting point of 1350 degrees Celsius. The ASTM A1082 UNS S32205 Screw can come in different types with coarse or fine threads. The self-tapping screws are also available in this grade of material. The applications of these fasteners can be seen in food processing, acid processing, chemical, petrochemical, pharmaceutical, oil and gas, marine and other industrial applications.
Standard ASTM A182, A479 / ASME SA182, SA479
Grade UNS S32205 F60
Dimensions DIN 931/912/975/976/2510, ISO 4014/4762, ASME B18.3/B18.2.1/B16.5/B18.2.3.6M
Threads Configuration ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Type Cold Forged, Hot Forged, Bar Stock Machined, Bar Stock Milling
Size M6-M100
Length 10mm-1 meter
ASTM A479 Duplex S32205 Eye Bolts
ASTM A182 Duplex Steel F60 S32205 Hex Bolts
Duplex Steel UNS S32205 F60 nuts
UNS S32205 F60 Structural Bolt
ASTM A479 UNS S32205 Flat Washers
UNS S32205 F60 Bolts
F60 UNS S32205 Threaded Rod
A479 S32205 F60 Square Bolts
UNS S32205 F60 Flange Nut
ASME SA479 UNS S32205 F60 Carriage Bolts
Duplex S32205 Stud Bolts
A182 F60 Screw
NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNESS | ACROSS THE FLATS | ACROSS CORNERS | ||||
---|---|---|---|---|---|---|---|---|
D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
m56 | 56.00 | 55.26 | 36.2 | 33.80 | 85.00 | 82.20 | 98.15 | 93.71 |
m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
S32205 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 21.0 – 23.0 | 2.50 - 3.50 | 4.50 – 6.50 | 0.8 – 0.20 | 63.54 min |
Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
S32205 | 7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 116000 , MPa – 800 | Psi – 80000 , MPa – 550 | 15 % |
STANDARD | UNS | WERKSTOFF NR. |
Duplex 2205 | S32205 | 1.4462 |