ASTM A182 F60 Flanges

Top Rated Manufacturer of UNS S32205 Flanges in India Available in Different Types

UNS S32205/ F60 Flanges are prepared from a simple duplex grade and are one of the most favored of the duplex grades. The flanges are manufactured with material GR. ASTM A 182 and are in compliance to ANSI, ASME, BS, DIN and other standards. There are certain types of flanges, which are used not to extend the length of the pipeline, but to finish the line – and the ASTM A182 F60 UNS S32205 Blind Flange is one of those flanges. When it comes to blind flanges one can come across various categories.

Size range of the ASTM A182 F60 Flanges is up to 36 inch, and in some cases larger. There are different dimensions and there are different standards so that pressure ratings must vary. The pressure capacities are generally indicated by the pressure classes of 150 to 2500. There are other categorisations of the flanges depending on the face type and the type of production. These UNS S32205 Flanges come in flat face, raised face and ring type joint flange as far as the face is concerned. They can also be plate flange, threaded flange, screwed flange or forged flange depending on the material of the flange in the manufacturing process type.

ASTM A 182 F 60 UNS S 32205 Flanges consists of carbon, manganese, silicon, phosphor, sulphur, nitrogen, iron and chromium 21%, molybdenum 2.5%, nickel 4.5 %. Due to the properties of the material of the flanges, it is in a position to offer a minimum tensile strength of 800Mpa, minimum yield strength of 550MPa minimum elongation rate of fifteen percent. These are connected with male threaded pipe ends. The threaded flanges can also be welded for better connection. The application of the flanges are in offshore oil drilling, sea water, pollution control, waste water management and in oil and gas industrial applications.

Regal Sales Corporation has sales represented in Malaysia, Netherlands, Vietnam, Kuwait, Saudi, Arabia, Nigeria, Thailand and all hard-to-find materials.

Get ASTM A182 Grade F60 Duplex Pipe Flanges With NPT, BSP, BSPT Thread Types, Check Specification

Exporter of Duplex Stainless Steel F60 Flanges & UNS S32205 F60 Threaded Flanges Used in High Temperature Appplication, View Dimension Chart

ASTM A182 F60 Flanges Supplier in India offers the most common types with high strength and corrosion resistance.

SA182 Grade F60 BLRF Flange & Duplex F60 Pipe Flanges With Excellent Corrosion Resistance, Check Equivalent Standards

ASTM A182 F60 Flanges Manufacturer in India provides flanges with pressure ratings ranging from 150 to 2500 PSI

ASTM A182 F60 Flanges Manufacturer in India offers a Excellent weight chart for flanges.

UNS S32205 Blind Flange & A182 F60 Socket Weld Flange With Good Weldability, Check Properties & Chemical Composition

ASTM A182 F60 Flanges Manufacturer in India offers flanges with equivalent material grades.

• ➤Range: -50°F to 750°F.
• ➤Low Temp: Brittle below -50°F.
• ➤High Temp: Strength drops above 750°F.
• ➤Corrosion: Reduced at high temps.
• ➤Use: Pressure vessels and piping.

• ➤ Thermal Fatigue: Good resistance to thermal fatigue.
• ➤ Strength: Retains strength under moderate thermal cycling.
• ➤ Cracking: Risk of micro-cracking at high temperatures.
• ➤ Low Temp: Toughness decreases below -50°F.
• ➤ Heat Treatment: Improves resistance to thermal cycling.

Yes, ASTM A182 F60 flanges can be ordered in bulk directly from the manufacturer.

Many manufacturers offer large-scale orders for industries worldwide, including in countries like Argentina, Indonesia, Colombia, Philippines, Morocco, Brazil, Peru, and Singapore. These regions are well-supported with international shipping, ensuring efficient delivery.