Nickel Alloy Fasteners Manufacturer in India
Leading Manufacturer of High Nickel Alloy Fasteners in India
High Nickel Alloy Fasteners are made up of metal alloys that have Nickel as the prominent component. Types of nickel alloys vary such as Monel grades, Incoloy grades, Inconel grades, Hastelloy and other commercially pure nickel alloys. The Nickel Alloy Uns N02200 Hexagon Nut is made up of a commercially pure nickel alloy that has above 99% nickel in the composition.
This is an expensive material and is used in specific applications such as chemical processing and in acid production plants. The material is highly resistant to corrosion and has good strength. The Uns N02201 Structural Bolts have 403MPa minimum tensile strength and 103MPa minimum yield strength in the annealed condition. The fasteners range in dimensions and sizes according to the different standards they are produced under.
The Asme Sa160 Nickel Alloy Threaded Stud Bolts and other fasteners can range in size from M3 to M150 with lengths varying from 3mm to 200mm. The diameter, length and the material composition of the fasteners are considered for different types of applications. The Nickel Alloy 201 Nuts can come in different types such as the hex nuts and square nuts. The applications of these fasteners can be seen in the food processing equipment, exhaust systems, equipment and tools, engine components and other chemical applications. The Nickel Alloy 200 Screws are also used interchangeably with the 201 fasteners in applications such as marine and seawater equipment, valve and pump parts, shafts and in high heat applications.
High Nickel Alloy Bolts
Nickel Alloy Fasteners
High Nickel Alloy Screws
Table of Content
- Specification of Nickel Alloy Fasteners
- Types of Nickel Alloy Fasteners
- Dimension Standard of High Nickel Alloy Set Screws
- Nickel Socket Screws Size Chart
- Nickel Hex Bolts Dimensions
- Torque Chart of Nickel Alloy Bolts
- Nickel Alloy Bolts Physical characteristics
- ASTM F2281 Nickel fasteners Material Equivalent
- Nickel Alloy Threaded Rod Mechanical Properties
- Chemical Compatibility of Pure Nickel washers
- Are Nickel Alloy Fasteners Expensive Compared to Stainless Steel Fasteners?
- Do Nickel Alloy Fasteners Require Special Storage Conditions?
- What is the Difference Between Precipitation-hardened and Solution-annealed Nickel Alloy Fasteners?
Get Nickel Alloy Bolts & ASTM F2281 Nickel Washer With Tensile, PMI Testing Method, Check Specification
Ni Alloy Fasteners Sizes
- Nuts : 3/6"- 2", M3 - M56
- Screw : 3/6"- 2", M3 - M56
- Washers : 4"- 3", M3 - M36
- Machine Screws : M1.6 - M12
Length
- Length: 3mm to 200mm
- Temp Range: 100°F to 1800°F
- Thickness: 1 - 300 mm
- Density: 8.9 g/cm3
Features
- Durable
- High Temperature Resistance
- Radiation Tolerant
- High Purity Grades
- Errosion Resistant
Finishing
- Zinc , black oxide, BZP
- Geometry, Dacroment
- Anodizing, nickel plated, plated zinc-nickel
- Hot Dip Galvanised (HDG),
Fasteners Threads
- UNF
- BSW
- METRIC
- BSF, UNC
Forms
- Hex
- Square
- Round
- Threading
Surface Coating
- Hot Dipped Galvanizing
- Ptfe Coated , Zinc Coated
- Xylon Coated, Phosphate
- Teflon , Cadmium
Head Drive
- Phillips
- Six-Lobe
- Slotted
- Phillips/ Slot
Production process
- Hot Forging
- Machining and CNC
- Cold Forging
- Customized
Applications
- Chemical Processings
- Aerospace, Marine
- Medical Devices
- Defense and Military
Testing Methods
- Tensile Testing
- Hardness Testing
- Corrosion Testing
- Impact Testing
Packaging Methods
- Pallet
- Carton
- Small Pack
- Corrugated Box
Pure Nickel Hex Bolts
Nickel Alloy Foundation Bolts
Nickel Threaded Rod
Nickel Steel Lag Bolts
ASTM F2281 Nickel Anchor Bolts
High Nickel Alloy Screws
ASME SF 2281 Nickel Elevator Screws
Nickel Alloy Washers
Nickel Silver Nuts and Bolts
High Nickel Alloy Head Cap screws
Nickel Bolts
ASTM F2281 Nickel Hanger Bolt
Nickel Steel Shoulder Bolts
Nickel Alloy Hex Flange Bolts
Nickel Silver Hexagon Bolts
ASTM F2281 Nickel Stud Bolts
Nickel Steel Eye Bolts
Pure Nickel J-Bolts
Ni alloy Carriage Bolts
Nickel Steel Alloy Hex Nuts
ASME SF 2281 Nickel Heavy Hex Bolts
Ni Alloy Countersunk Bolts
High Nickel Alloy Belleville Washers
Nickel Self Tapping Screw
Exporter of Ni Bolt & Nickel Alloy 201 Screw is Used in Marine Environments With Various Dimensions, Check Size Chart
| NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNEASTM A673 | ACROASTM A673 THE FLATS | ACROASTM A673 CORNERS | ||||
|---|---|---|---|---|---|---|---|---|
| D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
| m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
| m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
| m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
| m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
| m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
| m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
| m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
| m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
| m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
| m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
| m56 | 56.00 | 55.26 | 36.2 | 33.80 | 85.00 | 82.20 | 98.15 | 93.71 |
| m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
| m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
| m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
| m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
| m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
| Diameter* (mm) |
Nut Size (mm) |
Hex Nut | Nylock Nut | Jam Nut |
|---|---|---|---|---|
| 4 | 2 | 1.6 | - | 1.2 |
| 5.5 | 3 | 2.4 | 4 | 1.8 |
| 11 | 7 | 5.5 | - | 3.5 |
| 13 | 8 | 6.5 | 8 | 4 |
| 5 | 2.5 | 2 | - | 1.6 |
| 17 | 10 | 8 | 10 | 5 |
| 27 | 18 | 15 | 18.5 | 9 |
| 19 | 12 | 10 | 12 | 6 |
| 22 | 14 | 11 | 14 | 7 |
| 8 | 5 | 4 | 5 | 2.7 |
| 10 | 6 | 5 | 6 | 3.2 |
| 24 | 16 | 13 | 16 | 8 |
| 7 | 4 | 3.2 | 5 | 2.2 |
| 30 | 20 | 16 | 20 | 10 |
| Nickel Alloy Metric Nut Size | Nut Thread Pitch Chart |
s | e | m | ||
|---|---|---|---|---|---|---|
| width across flats in nut | hex nut dimensions across corners | Height of the Alloy 200/ 201 Nut |
||||
| max. | min. | min. | max. | min. | ||
| M1.6 | 00.35 | 3.20 | 3.02 | 3.41 | 1.30 | 1.05 |
| M2 | 00.4 | 4.00 | 3.82 | 4.32 | 1.60 | 1.35 |
| M2.5 | 00.45 | 5.00 | 4.82 | 5.45 | 2.00 | 1.75 |
| M3 | 00.5 | 5.50 | 5.32 | 6.01 | 2.40 | 2.15 |
| M3.5* | 00.6 | 6.00 | 5.82 | 6.58 | 2.80 | 2.55 |
| M4 | 00.7 | 7.00 | 6.78 | 7.66 | 3.2 | 2.9 |
| M5 | 00.8 | 8.00 | 7.78 | 8.79 | 4.7 | 4.4 |
| M6 | 1 | 10.00 | 9.78 | 11.05 | 5.2 | 4.9 |
| M8 | 1.25 | 13.00 | 12.73 | 14.38 | 6.80 | 6.44 |
| M10 | 1.5 | 16.00 | 15.73 | 17.77 | 8.40 | 8.04 |
| M12 | 1.75 | 18.00 | 17.73 | 20.03 | 10.80 | 10.37 |
| M14* | 2 | 21.00 | 20.67 | 23.36 | 12.8 | 12.1 |
| M16 | 2 | 24.00 | 23.67 | 26.75 | 14.8 | 14.1 |
| M18* | 2.5 | 27.00 | 26.16 | 29.56 | 15.8 | 15.1 |
| M20 | 2.5 | 30.00 | 29.16 | 32.95 | 18.0 | 16.9 |
| M22* | 2.5 | 34 | 33 | 37.29 | 19.4 | 18.1 |
| M24 | 3 | 36 | 35 | 39.55 | 21.5 | 20.2 |
| M27* | 3 | 41 | 40 | 45.2 | 23.8 | 22.5 |
| M30 | 3.5 | 46 | 45 | 50.85 | 25.6 | 24.3 |
| M33* | 3.5 | 50 | 49 | 55.37 | 28.7 | 27.4 |
| M36 | 4 | 55.0 | 53.8 | 60.79 | 31.0 | 29.4 |
| M39* | 4 | 60.0 | 58.8 | 66.44 | 33.4 | 31.8 |
| M42 | 4.5 | 65.0 | 63.1 | 71.3 | 34.0 | 32.4 |
| M45* | 4.5 | 70.0 | 68.1 | 76.95 | 36.0 | 34.4 |
| M48 | 5 | 75.0 | 73.1 | 82.6 | 38.0 | 36.4 |
| M52* | 5 | 80.0 | 78.1 | 88.25 | 42.0 | 40.4 |
| M56 | 5.5 | 85.0 | 82.8 | 93.56 | 45.0 | 43.4 |
| M60* | 5.5 | 90.0 | 87.8 | 99.21 | 48.0 | 46.4 |
| M64 | 6 | 95.0 | 92.8 | 104.86 | 51.0 | 49.1 |
| Bolt Size (inches) | Torque (ft-lbs) | Torque (Nm) |
|---|---|---|
| 1/4" | 6 | 8 |
| 5/16" | 12 | 16 |
| 3/8" | 20 | 27 |
| 7/16" | 33 | 45 |
| 1/2" | 50 | 68 |
| 9/16" | 70 | 95 |
| 5/8" | 100 | 135 |
| 3/4" | 145 | 197 |
| 7/8" | 231 | 313 |
| 1" | 343 | 465 |
| 1-1/8" | 490 | 664 |
| 1-1/4" | 700 | 949 |
ASME SF 2281 Nickel Bolt & Pure Nickel Stud Bolt Used in Food processing and High heat equipment, Check Physical Properties.
| Property | Value/Range |
|---|---|
| Thermal Conductivity | 10–25 W/m·K |
| Coefficient of Expansion | 10–15 x 10⁻⁶/°C |
| Electrical Conductivity | 1%–10% IACS |
| Electrical Resistivity | 100–130 μΩ·cm |
| Density | 8.1–8.8 g/cm³ |
| Grade | ASTM | ASME | UNS | WNR | GOST | AFNOR | JIS | BS | EN | DIN |
|---|---|---|---|---|---|---|---|---|---|---|
| America | Australia | North America | Russia | Russia | France | Japan | United Kingdom | Europe | Germany | |
| Nickel 201 | ASTM F2281 | ASME SF 2281 | N02201 | 2.4068 | НП-2 | – | NW 2201 | NA 12 | LC-Ni 99 | 2.4068 |
| Nickel 200 | ASTM F2281 | ASME SF 2281 | N02200 | 2.4066 | НП-2 | N-100M | NW 2200 | NA 11 | Ni 99.2 | 2.4066 |
View Nickel Plain Washer & Nickel Steel Square Bolts With Mechanical Properties & Chemical Composition
Nickel Alloy Fasteners Manufacturer in India offers fasteners with exceptional mechanical properties
Tensile Strength
80,000–200,000 psi (550–1,380 MPa)
Yield Strength
30,000–120,000 psi (200–825 MPa)
Elongation
15%–50%
Melting Point
1,250°C–1,350°C (2,280°F–2,460°F)
| Grades | Mn | Si | Ni | C | S | Fe | Cu |
|---|---|---|---|---|---|---|---|
| Nickel alloy 200 | 0.35 | 0.35 | 99.00 | 0.15 | 0.01 | 40 | 0.25 |
| Nickel alloy 201 | 0.35 | 0.35 | 99.00 | 0.02 | 0.01 | 0.40 | 0.25 |
Nickel Alloy Fasteners Supplier in India offers high-quality, corrosion-resistant fasteners at competitive prices.
Distribute in a Range of Countries, Including UAE, Kenya, Italy, Oman, Spain, Belgium, Germany, Netherlands, Qatar etc.
- ➤Yes, Nickel alloys are more expensive due to high nickel content.
- ➤Stainless steel is cheaper.
- ➤Nickel alloys offer better performance.
- ➤Manufacturing of nickel alloys is costlier.
| Yes, nickel alloy fasteners do require special storage conditions to maintain their quality | |
|---|---|
| Condition | Recommendation |
| Temperature & Humidity | Keep in a dry. |
| Corrosion Protection | Use coatings |
| Avoid Contaminants | Keep away from oils and chemicals. |
| Packaging | Store in sealed bags |
| Shelving | minimize handling. |
| Feature | Precipitation-Hardened Nickel Alloy Fasteners | Solution-Annealed Nickel Alloy Fasteners |
|---|---|---|
| Heat Treatment Process | Heated, quenched, and aged | Heated and slowly cooled |
| Strength | High strength and hardness | Lower strength |
| Ductility | Lower ductility | Good ductility and toughness |
| Corrosion Resistance | Good | Excellent corrosion resistance |
| Uses | High-strength applications | Toughness and formability |