Incoloy 825 Fasteners

Incoloy 800/ 800H Fasteners are nickel chromium alloy fasteners with 30% nickel, 19% chromium, carbon, manganese, silicon, sulfur, copper, iron, aluminum and titanium for stabilization. There are DIN, ASTM and other international standards for the fasteners of this grade. There are ASTM B408 Incoloy Nut, bolt, screw, stud, washer and threaded rod types. The fasteners range in length from 3mm to 200mm with different dimensions for different fastener types. The bolts and nuts range in size from M3 to M56 or from 3/6 inches to 2 inches. The 800H Incoloy Bolt has higher carbon than the 800 grade.

Inconel 800 Bolts

Inconel 825 Hex Bolts

Incoloy 925 Threaded Rod

The washers come in sizes ranging from M1 to M64 or from #4 to 3 inches. There are different types of nuts such as the Inconel 800 Dome nuts, hex nuts, cone nuts, lag nuts, lock nuts and others. The bolts come in different types as well. Thee are square neck bolts, hex head bolts, eye bolts of different kinds and structural bolts as well. The Incoloy 800H Eye Bolts are used in heavy load bearing applications. The material is highly corrosion resistant and can withstand high oxidation, reduction and acids. The Incoloy 800H Panel Bolts and other fasteners are used in chemical, petrochemical, pharmaceutical, food processing and in power plant applications.

Incoloy 825 Fasteners belong to the ASTM B425 specification. There are different grades of incoloy based on the nickel chromium iron composition. The ASTM B425 Gr 825 Bolts come under different standards such as ASME B18.5, ANSI B28.2.4 and so on. The DIN, UTS, ISO and other international standards govern the dimensions of the fasteners. These fasteners can range from M02 to M160. The length of the fasteners ranges from 3mm to 200mm. The Incoloy 825 Bolts come in different types as well. There are hex bolt, square bolt, countersunk bolt, T bolt, U bolt, eye bolt and other types. Apart from the bolts, there are nuts, screws, washers and studs that come in different types as well. The Incoloy 925 Fasteners are age hardenable fasteners that have better mechanical properties than the 825 grade. Both grades could be used interchangeably but they are required for specific use cases. The Alloy 825 Fasteners have 550MPa minimum tensile strength and 220MPa minimum yield strength with 30% elongation rate. These mechanical properties are possible because of the composition. The material has 22% iron, 19.5% chromium, copper and 42% nickel in the composition. The applications of the ASTM B425 N08825 Hex Bolt and other fasteners can be seen in the sea water, wastewater management, pollution control, marine, ship building, chemical, food processing, petroleum, petrochemical and power plant applications.

Table of Content

• Inconel 800 Bolts Specification Format
• Frequently Used Inconel 825 Hex Bolts Types
• Incoloy 825 Fasteners Chemical Analysis
• ASTM B425 Gr 825 Bolts Mechanical Strength Table
• Equivalent Material Grade Of Incoloy 925 Fasteners

Incoloy 825 Heavy Hex Bolts

DIN 2.4858 Incoloy Anchor Bolts

Incoloy UNS N08800 Carriage Bolts

incoloy Alloy UNS N08800 Concrete Screw

Grade N08800 Wing Screw

N09925 Socket Head Cap Screw

N08800 Double Ended Studs

Incoloy 825 Split Washers

UNS N09925 Spring Washers

N08825 Hex Head Bolts

Incoloy 800 Square Bolts

Incoloy Nyloc Nuts