Get a Quote

Inconel 600 Flanges manufacturer

Alloy 600 Blind Flange and ASTM B564 UNS N06600 Slip on Flange supplier in India

Inconel 600 Flanges are made up of a type of nickel chromium alloy. There are different grades of nickel chromium alloys each differ with the chemical compositions. The difference in the chemical compositions make the differences in the mechanical and physical properties as well. The Alloy 600 Weld Neck Flange, slip on flange, socket weld flange and other types are available. The flange types vary in the face type as well. The flanges can be of flat face, raised face or ring type joint. These flanges belong to the ASTM SB564 specification.

Inconel 600 Flanges

Inconel 600 Flanges

Alloy 600 Blind Flange

Alloy 600 Blind Flange

ASTM B564 UNS N06600 Slip on Flange

ASTM B564 UNS N06600 Slip on Flange

The Astm B564 Uns N06600 Inconel 600 Flanges come in the range of ½ inches to 60 inches in size. The dimensions of the flanges range according to the standards such as ANSI, ASME, DIN and all other international standards. Depending on the dimensions, the pressure capacities vary as well. The Asme Sb 564 N06600 Slip On Flanges can vary in pressure rating from class 150 to class2500. There are PN6 through PN64 pressure numbers corresponding to these classes and pressure capacities. The Nickel Alloy 600 Flanges are made up of 72% nickel, 14% chromium minimum with carbon, manganese, silicon, copper and iron in the composition. The material has 655MPa minimum tensile strength 310MPa minimum yield strength and 40% elongation ratio. The Alloy 600 Weld Neck Flange and others can be used under high temperatures and highly corrosive elements. The material has 1413 degrees Celsius melting point and has higher resistance against acids and reducing agents.

Table of Content



View ASME 16.5 Inconel Alloy 600 Slip On Raised Face Flange Price List, Ready stock of ASTM B564 UNS N06600 Weld Neck Flange to dispatch worldwide


What is Inconel 600 Flanges?


Standards and Specification of ASME 16.5 Inconel Alloy 600 Flanges


Size Chart 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Standards API7S-15, API7S-43, API605, ANSI/ASME B16.5, B16.47 Series A & B, B16.48, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, EN1092
JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
UNI 6Bar 10Bar 16Bar 25Bar 40Bar
Pressure Rating ANSI 600 LBS, 900 LBS, 150 LBS, 2500 LBS, 300 LBS, 1500 LBS
Pressure Calculation in DIN 16Bar 6Bar 25Bar 40Bar 10Bar / PN10 PN16 PN6 PN25 PN64 PN40
EN 6Bar 10Bar 16Bar 25Bar 40Bar
Coating Anti-rust Paint, Zinc Plated,Oil Black Paint, Cold and Hot Dip Galvanized, Yellow Transparent
Production technique
  • Forged, Heat treated and machined
Connect Type/ Flange Face Type Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Raised Face (RF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Equipment Bending machine, Pushing Machine,Press machine, electric bevelling machine, Sand-blasting machine etc
Origin Indian / West Europe / Japan / USA / Korean
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations
Test Hydrostatic testing machine, X-ray detector, Direct-reading Spectrograph, UI trasonic flaw detector, Magnetic particle detector
Most common types Forged / Threaded / Screwed / Plate
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Manufacturer of

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

  • B.S: BS4504 , BS3293, BS1560, BS10
  • German (DIN)
  • AS 2129: Table D; Table E; Table H
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • American standard (ANSI)
  • British standard (BS)
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
  • The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
Uses & application
  • Nuclear power (mostly seamless).
  • Bitumen upgraders.
  • Petrochemicals and acids.
  • Heavy oil refineries.
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Check Price per kg of Alloy 600 Flanges


Price of Inconel 600 Flanges Alloy 600 Flange Price in India (INR) Alloy 600 Flange Price in USD Alloy 600 Flange Price in UAE Dirham
BLIND FLANGE 2 150# RF ASME B16.5 50-150RF-INCONEL 600 INR 18,583 $248.01 910.92 UAE Dirham
INCONEL ALLOY 600 FLANGE ASME SB564 UNS N06600 ASME B16.5 2NB SCH 40 INR 31,922 $426.03 1564.78 UAE Dirham
FLANGES - INCONEL FLANGES (INC.825) 2 WN 600 RF SCH XXS INR 1,436 $19.16 70.39 UAE Dirham
ALLOY 600 1300# SM.GRV.WN SCH80(NICKEL ALLOYS)SB564 UNS N06600 INCONEL FORGED FLANGE ASME B16.5 DN25 INR 20,832 $278.02 1021.16 UAE Dirham

Available Types of ASTM B564 UNS N06600 Flanges


Inconel 600 Spectacle Blind Flange

Inconel 600 Spectacle Blind Flange

ASME 16.5 Inconel Alloy 600 Slip On Raised Face Flange

ASME 16.5 Inconel Alloy 600 Slip On Raised Face Flange

Inconel 600 Socket Weld Flanges

Inconel 600 Socket Weld Flanges

Inconel Alloy 600 Reducing Flanges

Inconel Alloy 600 Reducing Flanges

Inconel 600 Weld Neck Flanges

Inconel 600 Weld Neck Flanges

3inch 1500# RF Inconel 600 Weld neck flange ASME B16.5

3inch 1500# RF Inconel 600 Weld neck flange ASME B16.5

Alloy 600 3 1/2 Class 600 PN 110 ASTM B16.5 WNRF welding neck Flange

Alloy 600 3 1/2" Class 600 PN 110 ASTM B16.5 WNRF welding neck Flange

DIN 17750 Threaded Flange

DIN 17750 Threaded Flange

BS 3072-3076 (NA14) DIN 17742 Flange

BS 3072-3076 (NA14) DIN 17742 Flange

600 Nickel Alloy Socket Weld Flanges

600 Nickel Alloy Socket Weld Flanges

JIS NCF 600 Spectacle Blind Flanges

JIS NCF 600 Spectacle Blind Flanges

Alloy 600 Square Flanges

Alloy 600 Square Flanges

Inconel 600 BS4504 Tongue & Groove Flanges

Inconel 600 BS4504 Tongue & Groove Flanges

ASTM B564 Inconel Alloy 600 Weld Neck Flange

ASTM B564 Inconel Alloy 600 Weld Neck Flange

Inconel 600 Blind flange

Inconel 600 Blind flange

ASME B16.5 3 inch Class 300 PN 50 UNS N06600 WNRF ansi flange

ASME B16.5 3 inch Class 300 PN 50 UNS N06600 WNRF ansi flange

TÜV 305 Spectacle Blind Flange

TÜV 305 Spectacle Blind Flange

Werkstoff No 2.4816 Nickel Alloy Flat Face Flanges

Werkstoff No 2.4816 Nickel Alloy Flat Face Flanges

Inconel 600 Slip on flange

Inconel 600 Slip on flange

AFNOR-NC 15 Fe Ring Joint Flange

AFNOR-NC 15 Fe Ring Joint Flange


600 Nickel Alloy Socket Weld Flanges manufacturer, Melting Range of JIS NCF 600 Spectacle Blind Flanges is 1354 – 1413°C.


Equivalent material grade of UNS N06600 Flanges


STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Inconel 600 2.4816 N06600 NCF 600 NA 13 МНЖМц 28-2,5-1,5 NC15FE11M NiCr15Fe

High Nickel Content in Inconel Alloy 600 Reducing Flanges provides a resistance to reducing environments. Buy Inconel 600 BS4504 Tongue & Groove Flanges at factory price

Mechanical Behaviour of Werkstoff No 2.4816 Flanges


Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 600 8.47 g/cm3 1413 °C (2580 °F) Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 40 %

Chemical Composition Chart of JIS NCF 600 Flanges


Grade C Mn Si S Cu Fe Ni Cr
Inconel 600 0.15 max 1.00 max 0.50 max 0.015max 0.50 max 6.00 – 10.00 72.00 min 14.00 – 17.00

Ready Stock of Inconel Alloy 600 Flanges


ASTM B564 UNS N06600 Slip on Flange Inconel 600 ASTM B564 Threaded Flange
Inconel 600 DIN 2.4816 Flange Inconel 600 Blind Flange
Inconel 600 DIN 2.4816 Reducing Flange Alloy 600 Socket Weld Flange
600 Inconel SORF Flange Inconel 600 DIN 2.4816 BLRF Flange
600 Inconel Long Weld Neck Flanges Inconel 600 DIN 2.4816 Spectacle Blind Flanges
Inconel 600 ASTM B564 Weld Neck Flanges Inconel 600 Lap Joint Flanges
Inconel 600 BS 4504 Flanges Alloy 600 EN 1092-1 Flanges
Inconel 600 ASTM B564 Spades & Ring Spacers Alloy 600 Nipoflange
Inconel 600 5D Weldoflange Inconel alloy 600 Flange Outlet
Inconel 600 DIN 2.4816 Forged Flanges Nickel 600 Plate Flange
Inconel 600 DIN 2.4816 Ring Type Joint Flanges Alloy 600 Raised Face Flanges
Inconel 600 Tongue and Groove Flanges Nickel 600 Male and Female Flange
Inconel 600 ASTM B564 Reducing Flanges Inconel 600 DIN 2.4816 ASME B16.5 Flanges
Inconel alloy 600 Flanges ASTM B564 UNS N06600 BS 10 Flanges
Inconel alloy 600 WNRF Flange ASTM B564 UNS N06600 RTJ Flange
Inconel 600 Series a Lap Joint Ring Flange Alloy 600 Class 300 threaded flange
Inconel 600 DIN 2.4816 PN16 blind flange Nickel Alloy 600 Forged Socket Weld Pipe Flange
Inconel 600 Class 300 slip on flange Inconel 600 ASTM B564 Slip On Weld Flange
600 Inconel Class 150 Flange Nickel Alloy 600 Pipe Flanges
Inconel 600 DIN 2.4816 BS 10 Flanges Inconel 600 UNS N06600 Class 150 Tongue & Groove Flanges
ASTM B564 UNS N06600 Forged steel slip on flanges ASTM B564 UNS N06600 Race face slip on flange
Inconel alloy 600 SWRF Flange Nickel Alloy 600 Forged blind flange
Inconel 600 groove weld neck flange 600 Inconel Socket Weld Hub Flange
Inconel alloy 600 threaded lap joint flange Nickel Alloy 600 Slip On Integral flange
Inconel 600 Forged integral puddle flange ASTM B564 UNS N06600 table e long weld neck
Inconel 600 DIN 2.4816 Class 150 LBS Flange Nickel 600 PN10 Forged Flanges
Inconel 600 RTJ Flanges Inconel 600 ASTM B564 PN10 Plate Flanges
Inconel 600 DIN 2.4816 Tongue & Groove Flanges Inconel 600 Reducing Flanges
ASTM B564 UNS N06600 Class 150 reducing threaded flange ASTM B564 UNS N06600 Class 150 Pipe Flange
Alloy 600 Bleed Rings Inconel 600 DIN 2.4816 Class 150 Weldoflange
ASTM B564 UNS N06600 Class 150 LBS Nipo Flange Inconel 600 DIN 2.4816 Long Weld Neck Flanges
600 Inconel Lap Joint Pipe Flanges 600 Inconel PN16 Screwed Flanges
ASTM B564 UNS N06600 BS 4504 pn16 flange Inconel 600 DIN 2.4816 EN 1092-1 flat flange
Nickel Alloy 600 Raised Face Flanges 600 Inconel Flat Faced Plate Flanges

Dimensions of 600 Inconel Flanges


Class 150 Flange Dimensions

Nominal Size Outside Diameter
(OD) 		Min. Thickness
(T) 		RF Dia.
(R) 		No. of Bolt Holes Diameter of Holes Bolt Circle
(BC) 		SO Bore ID
(SB) 		WN Bore ID
(WB) 		Dia. Hub Base
(HB) 		Dia. of Hub Top
(HT) 		SO LTH
(SL) 		WN LTH
(WL)
1⁄2 3.50 0.38 1.38 4 0.62 2.38 0.88 0.62 1.19 0.84 0.56 1.81
3⁄4 3.88 0.44 1.69 4 0.62 2.75 1.09 0.82 1.50 1.05 0.56 2.00
1 4.25 0.50 2.00 4 0.62 3.12 1.36 1.05 1.94 1.32 0.62 2.12
11⁄4 4.62 0.56 2.50 4 0.62 3.50 1.70 1.38 2.31 1.66 0.75 2.19
11⁄2 5.00 0.62 2.88 4 0.62 3.88 1.95 1.61 2.56 1.90 0.81 2.38
2 6.00 0.69 3.62 4 0.75 4.75 2.44 2.07 3.06 2.38 0.94 2.44
21⁄2 7.00 0.81 4.12 4 0.75 5.50 2.94 2.47 3.56 2.88 1.06 2.69
3 7.50 0.88 5.00 4 0.75 6.00 3.57 3.07 4.25 3.50 1.12 2.69
31⁄2 8.50 0.88 5.50 8 0.75 7.00 4.07 3.55 4.81 4.00 1.19 2.75
4 9.00 0.88 6.19 8 0.75 7.50 4.57 4.03 5.31 4.50 1.25 2.94
5 10.00 0.88 7.31 8 0.88 8.50 5.66 5.05 6.44 5.56 1.38 3.44
6 11.00 0.94 8.50 8 0.88 9.50 6.72 6.07 7.56 6.63 1.50 3.44
8 13.50 1.06 10.62 8 0.88 11.75 8.72 7.98 9.69 8.63 1.69 3.94
10 16.00 1.12 12.75 12 1.00 14.25 10.88 10.02 12.00 10.75 1.88 3.94
12 19.00 1.19 15.00 12 1.00 17.00 12.88 12.00 14.38 12.75 2.12 4.44
14 21.00 1.31 16.25 12 1.12 18.75 14.14 13.25 15.75 14.00 2.19 4.94
16 23.50 1.38 18.50 16 1.12 21.25 16.16 15.25 18.00 16.00 2.44 4.94
18 25.00 1.50 21.00 16 1.25 22.75 18.18 17.25 19.88 18.00 2.62 5.44
20 27.50 1.62 23.00 20 1.25 25.00 20.20 19.25 22.00 20.00 2.81 5.62
22 29.50 1.75 25.25 20 1.38 27.25 22.22 21.25 24.25 22.00 3.07 5.82
24 32.00 1.81 27.25 20 1.38 29.50 24.25 23.25 26.12 24.00 3.19 5.94


Weight Chart of Nickel 600 Flanges


Standard

Class

Diameter

Bolt Circle Diameter

Number of Bolts

Bolt Size

Diameter of Bolt Hole

AS4087 Flanges

PN14 Flanges

95

67

4

M12

14

AS 2129 Flange

 

 

 

 

 

Table C Flanges

95

67

4

13

14

Table D Flanges

95

67

4

13

14

Table E Flanges

95

67

4

13

14

Table F Flanges

95

67

4

13

14

Table H Flanges

114

83

4

16

17

Table J Flanges

114

83

4

16

17

ANSI B16.5 Flanges

 

 

 

 

ANSI 150 Flanges

89

60

4

13

16

ANSI 300 Flanges

95

67

4

13

16

ANSI 600 Flanges

95

67

4

13

16

ANSI 900 Flanges

121

83

4

19

22

ANSI 1500 Flanges

121

83

4

19

22

ISO 7005 (DIN) Flange

 

 

 

 

 

PN6 Flanges

80

55

4

M10

11

PN10 Flanges

95

65

4

M12

14

PN16 Flanges

95

65

4

M12

14

PN20 Flanges

90

60.5

4

M14

16

PN25 Flanges

95

65

4

M12

14

PN40 Flanges

95

65

4

M12

14

Materials