Inconel 601 Fasteners are made up of a nickel chromium alloy. The material comes in different grades according to the composition. The Inconel 601 material has aluminum, carbon, 21% chromium, copper, iron, manganese, 58% nickel, sulfur and silicon in the composition. There are different fasteners such as the 601 Alloy Shoulder Nuts, bolts, screws, washers, studs and threaded rods. Each of them comes in different types as well.
Inconel 601 Fasteners
ASTM B166 601 Inconel Alloy Bolts
UNS N06601 Washers
The material has 760MPa minimum tensile strength, 450MPa minimum yield strength and 42% elongation rate. The Alloy 601 Bolt can be used at high temperature applications due to the high melting point of the material. The material has 1411 degrees Celsius melting point. The material can be solution annealed to increase the hardness. The ASTM B166 Inconel 601 Nut comes in different types such as the hex nuts, square nuts and other types. Each fastener has a different dimension. The dimensions of the fasteners are covered by ASTM, IS, BS and other international standards. The specification for the Inconel 601 Hex Head Nuts and other fasteners of this grade is ASTM B166. The sizes range from 3mm to 200mm. The length of the fasteners range from M02 to M33. The Inconel 601 Hex Bolts and other fasteners are used in oil and gas, petroleum, petrochemical and other industrial applications as well.
Material | Inconel 601 Alloy Fasteners |
---|---|
Inconel 601 Fasteners ASTM / ANSI | ASTM B166 / ASME SB166 |
Size of Inconel 601 Fasteners | M02 to M160 |
Length of Inconel 601 Fasteners | 3 mm to 200 mm |
Inconel 601 Fasteners Threads: | BSW, UNC, BSF, UNF METRIC, or as required |
M3, M14, M2.5, M2, M12, M5, M6, M4, M20, M16, M30, M24, M36, M8, M10 etc. | |
Inconel 601 Fasteners Standard: |
JIS, ASTM,BS, GB, DIN, IS, ISO
DIN: DIN 931, DIN 970, 934 DIN DIN 933 UTS – Unified Thread Standard : NPTF, UNS, NPT, UNF, UNC, UNEF ISO – International Organization for Standardization : ISO 4033 ,ISO 4032, JIS standards |
Widely Use Inconel 601 Bolts Types | Inconel 601 Hex Bolt, Square Bolt, Counter sunk Bolt, Hex Head Bolt,T Bolt, U Bolt, Eye Bolt, Lag Bolt etc. |
Widely Use Inconel 601 Nut Types | Inconel 601 Hex Head Nut, Lock Nut Coupling Nut, Square Nut, Wing Nut, Panel Nut, Acorn Nuts, T Nut, Dome Nut, Eye Nutetc. |
Widely Use Inconel 601 Screw Types | Inconel 601 Socket Head Screw, Threaded Screw, Socket Set Screw, Blind Rivet, Concrete Screw, Shoulder Screw, Anchor Screw, Panel Screw, Machine Screw, Hex Head Screw etc. |
Widely Use Inconel 601 Washer Types | Inconel 601 Machine Washers, Lock Washer, Sealing Washer, Star Washers, Split Washer etc. |
Widely Use Inconel 601 Studs Types | Inconel 601 Threaded Tod, Tie Rods, Double Ended Studs, Tie Bars etc. |
Scope of Manufacture |
|
Inconel 601 Fasteners In Form of: | Square, Round, Threading as per Gauge,Round Etc. |
Test Certificate of Inconel 601 Bolts : | EN 10204 / 3.1 |
Finishing of Inconel 601 Fasteners: | Zinc (yellow, white, blue, black), black oxide,
Dacroment, Geometry, nickel plated, anodizing, plated zinc-nickel, Stainless steel: Passivated Bright Zinc Plated (BZP), Self-Colour, Hot Dip Galvanised (HDG), Stainless Steel, Sherardized,Mechanically Applied coating and some special one like DACROMET |
Inconel 601 Fasteners Production process | hot forging M24-M100, M2-M24: Cold Froging
for Customized connecting element machining and CNC |
Inconel 601 bolts Head drive: | Six-Lobe, Phillips/Slot, Slotted, Phillips etc |
Surface Coating of Inconel 601 Fasteners materials: |
|
Top Manufacturers of Fasteners | SPAX® Screws, EBY Fastener, Sundaram Kundan, GKW, Infasco, Precision, APL, Unbrako,Etc. |
Packing of Inconel 601 Fasteners: | In Bulk: pallet, Canton, Small Carton / Boxs / Pallet, or customer request |
Specialized manufacturer of | Inconel 601 High Tensile Fasteners, Bolts |
Inconel 601 Fasteners Test Certificates |
|
N06601 Hex Head Bolts
ASME SB166 Inconel 601 U Bolts
SB166 Inconel 601 Hex Bolts
Inconel 601 Panel Nuts
UNS N06601 Square Nuts
B166 Inconel UNS N06601 Hex Nuts
ASME SB166 N06601 Dome Nuts
Inconel 601 Serrated Flange Nuts
Inconel 601 Self Locking Nuts
SB166 N06601 Heavy Hex Nuts
N06601 Threaded Rod
Grade N06601 Wing Screw
Nominal Size or Basic Major Thread Diameter | F | G | H | ||||||
Width Across Flats |
Width Across Corners |
Thickness | |||||||
Basic | Max | Min | Max | Min | Basic | Max | Min | ||
1/4 | .2500 | 7/16 | .438 | .428 | .505 | .488 | 7/32 | .226 | .212 |
5/16 | .3125 | 1/2 | .500 | .489 | .577 | .557 | 17/64 | .273 | .258 |
3/8 | .3750 | 9/16 | .562 | .551 | .650 | .628 | 21/64 | .337 | .479 |
7/16 | .4375 | 11/16 | .688 | .675 | .794 | .768 | 3/8 | .385 | .365 |
1/2 | .5000 | 3/4 | .750 | .736 | .866 | .840 | 7/16 | .448 | .427 |
9/16 | .5625 | 7/8 | .875 | .861 | 1.010 | .982 | 31/64 | .496 | .473 |
5/8 | .6250 | 15/16 | .938 | .922 | 1.083 | 1.051 | 35/64 | .559 | .535 |
3/4 | .7500 | 1-1/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | .665 | .617 |
7/8 | .8750 | 1-5/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | .776 | .724 |
1 | 1.0000 | 1-1/2 | 1.500 | 1.450 | 1.732 | 1.653 | 55/64 | .887 | .831 |
1-1/8 | 1.1250 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | .999 | .939 |
1-3/8 | 1.3750 | 2-1/16 | 2.062 | 1.994 | 2.382 | 2.273 | 1-11/64 | 1.206 | 1.138 |
1-1/2 | 1.500 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 1-9/32 | 1.ASTM A194 GR. 8 | 1.245 |
1-5/8 | 1.6250 | 2-7/16 | 2.438 | 2.356 | 2.815 | 2.686 | 1-25/64 | 1.429 | 1.353 |
1-3/4 | 1.7500 | 2-5/8 | 2.625 | 2.538 | 3.031 | 2.893 | 1-1/2 | 1.540 | 1.460 |
2 | 2.0000 | 3 | 3.000 | 2.900 | 3.464 | 3.306 | 1-23/32 | 1.763 | 1.675 |
2-1/4 | 2.2500 | 3-3/8 | 3.375 | 3.263 | 3.897 | 3.719 | 1-15/16 | 1.986 | 1.890 |
2-1/2 | 2.5000 | 3-3/4 | 3.750 | 3.625 | 4.330 | 4.133 | 2-5/32 | 2.209 | 2.105 |
2-3/4 | 2.7500 | 4-1/8 | 4.125 | 3.988 | 4.763 | 4.546 | 2-3/8 | 2.431 | 2.319 |
NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNEASTM A193 | ACROASTM A193 THE FLATS | ACROASTM A193 CORNERS | ||||
---|---|---|---|---|---|---|---|---|
D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
Nut Size (mm) |
Diameter* (mm) |
Height (mm) |
||
---|---|---|---|---|
Hex Nut | Jam Nut | Nylock Nut | ||
2 | 4 | 1.6 | 1.2 | - |
2.5 | 5 | 2 | 1.6 | - |
3 | 5.5 | 2.4 | 1.8 | 4 |
4 | 7 | 3.2 | 2.2 | 5 |
5 | 8 | 4 | 2.7 | 5 |
6 | 10 | 5 | 3.2 | 6 |
7 | 11 | 5.5 | 3.5 | - |
8 | 13 | 6.5 | 4 | 8 |
10 | 17 | 8 | 5 | 10 |
12 | 19 | 10 | 6 | 12 |
14 | 22 | 11 | 7 | 14 |
16 | 24 | 13 | 8 | 16 |
18 | 27 | 15 | 9 | 18.5 |
20 | 30 | 16 | 10 | 20 |
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
Inconel 601 | 0.10 max | 1.0 max | 0.5 max | 0.015 max | 1.0 max | Balance | 58.0 – 63.0 | 21.0 – 25.0 |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Inconel 601 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Inconel 601 | 2.4851 | N06601 | NCF 601 | NA 49 | XH60BT | NC23FeA | NiCr23Fe |