Inconel 601 Flanges are made up of a nickel chromium alloy. The material grads range differently with the composition ratio. The 601 grade has 58% nickel, 21% chromium, carbon, manganese, silicon, sulfur, copper and iron in the composition. There are different types such as socket weld flanges, welded neck flanges, Inconel 601 Slip On Flanges, orifice flanges and so on. The flanges made of this material are strong, corrosion resistant to acids, reducing agents and oxidation and are also harder.
Inconel 601 Flanges
ASTM B564 Uns N06601 Flange
Alloy 601 Flanges
The Alloy 601 Flanges have 550MPa minimum tensile strength, 205MPa minimum yield strength and 30% elongation rate. The material is denser than the ordinary stainless steels and has 1411 degrees Celsius melting point. These flanges belong to the ASTM B564 specification and the standards are ASME, ASTM, DIN and other international standards such as ASME B16.5, B16.47 and so on. There are different functional types such as the ASME SB564 Alloy 601 Lap Joint Flange, slip on flanges, weld neck flanges, socket weld flanges and orifice flanges. The face type of the flanges vary as flat face, raised face and ring type joint. The sizes of the flanges range from ½ inches to 48 inches and the pressure ratings vary. The Inconel UNS N06601 Pipe Flanges can come in pressure classes ranging from class 150 to class 2500. These are presented with pressure numbers Pn6 through PN64. The applications of the 601 Alloy Weld Neck Flangeis in the chemical, power plant, petroleum and petrochemical industrial applications.
Flange Size | 1/2" (15 NB) to 48" (1200NB) |
ASME B16.5 Flange Pressure Rating | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
ASME B16.5 Flange Pressure Calculation in DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
ASME Flange Standards | ANSI/ASME B16.5 |
Special design | As per your drawing |
Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized |
Flange Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove |
Test Certificates | EN 10204/3.1B |
Raw Materials Certificate | |
100% Radiography Test Report | |
Third Party Inspection Report, etc |
Alloy 601 Lap Joint Flange
ASTM B564 601 Long WN Flange
Steel B564 601 Threaded Flange
ASTM B564 601 Plate Flange
Inconel 601 Reducing Flanges
Alloy 601 Slip On Flange
ASTM B564 601 Raised Face Flange
Inconel 601 Weldoflange
Alloy 601 High Hub Blind Flange
ASTM B564 601 Spacer Flange
B564 601 Spade Flange
Astm B564 Uns N06601 Flanges
Standard |
Class |
Diameter |
Bolt Circle Diameter |
Number of Bolts |
Bolt Size |
Diameter of Bolt Hole |
---|---|---|---|---|---|---|
AS4087 |
PN14 |
95 |
67 |
4 |
M12 |
14 |
AS 2129 Flange |
Table C |
95 |
67 |
4 |
13 |
14 |
Table D |
95 |
67 |
4 |
13 |
14 |
|
Table E |
95 |
67 |
4 |
13 |
14 |
|
Table F |
95 |
67 |
4 |
13 |
14 |
|
Table H |
114 |
83 |
4 |
16 |
17 |
|
Table J |
114 |
83 |
4 |
16 |
17 |
|
ANSI B16.5 |
ANSI 150 |
89 |
60 |
4 |
13 |
16 |
ANSI 300 |
95 |
67 |
4 |
13 |
16 |
|
ANSI 600 |
95 |
67 |
4 |
13 |
16 |
|
ANSI 900 |
121 |
83 |
4 |
19 |
22 |
|
ANSI 1500 |
121 |
83 |
4 |
19 |
22 |
|
ISO 7005 (DIN) Flange |
PN6 |
80 |
55 |
4 |
M10 |
11 |
PN10 |
95 |
65 |
4 |
M12 |
14 |
|
PN16 |
95 |
65 |
4 |
M12 |
14 |
|
PN20 |
90 |
60.5 |
4 |
M14 |
16 |
|
PN25 |
95 |
65 |
4 |
M12 |
14 |
|
PN40 |
95 |
65 |
4 |
M12 |
14 |
ASME/ANSI B 16.5 | Slip on Flange, Welding Neck Flange, High Hub Blind Flange, Blind Flange,Lap Joint Flange, Socket Weld Flange, Ring Type Joint Flange, Threaded Flange |
PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
ASME/ANSI B 16.47 | Blind Flange [Series A & B], Welding Neck Flange |
PRESSURE CLASS | 75, 150, 300, 400, 600, 900 |
ASME/ANSI B 16.36 | Slip on Flange, Welding Neck Flange, Threaded Flange |
PRESSURE CLASS | 300, 400, 600, 900, 1500, 2500 |
BS 4504 SEC 3.1 | Hubbed Slip on Flange, Welding Neck Flange, Lapped Pipe End Flange, Hubbed Threaded Flange, Loose Plate Flange, Plate Flange, Blank Flange, Loose Plate With Weld Neck Flange |
PRESSURE CLASS | PN 2.5 TO PN 40 |
BS 4504[PART 1] | Welding Neck Flange, Plate Flange, Hubbed Slip-On Hubbed Threaded,Blank Flange, Loose Plate With Weld On Plate Collar |
PRESSURE CLASS | PN 2.5 TO PN 400 |
BS 1560 BOSS | Socket Welding Flange, Welding Neck Flange, Blind Flange, Slip-On Flange, Lapped Flange, Screwed Boss Flange |
PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
BS10 | Plate Slip-On Flange, Welding Neck Flange, Slip-On Boss Flange, Screwed Boss Flange, Blind Flange |
TABLE | D, E, F, H |
DIN FLANGES | DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673 |
PRESSURE CLASS | PN 6 TO PN 100 |
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
Inconel 601 | 0.15 max | 1.00 max | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Inconel 601 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Inconel 601 | 2.4816 | N06601 | NCF 601 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |