Incoloy 825 Flanges are made up of a nickel chromium alloy that has 38% nickel and 19% chromium in the composition along with carbon, manganese, silicon, sulfur, copper, iron, aluminum and titanium for stabilization. The Incoloy UNS N08825 Pipe Flanges vary in dimensions and sizes with different specifications and standards. The flanges vary in type such as slip on flanges, weld neck flanges, socket weld flanges and blind flanges. The material has high 550MPa minimum tensile strength, 220MPa minimum yield strength and 30% elongation rate.
Incoloy 825 Flanges
Astm B564 Uns N08825 Flange
Incoloy 825 Weld Neck Flanges
The Incoloy 825 Slip On Flanges are used in precision applications along with seamless pipes. The material of the flanges has high density and 1400 degrees Celsius melting point. The specification for the flanges of this grade of material is the ASTM B564 and the standards vary as ASME B16.5, ASME B16.47 series A and B, and other international standards as well. The Inconel 825 Long weld neck is a weld neck flange with a long neck. This type of design helps to hold larger pipe sizes in place during welding. The flanges range from ½ inches to 60 inches with various wall thicknesses. Depending on the flange dimensions the pressure classes of the DIN 2.4858 Socket Weld Flanges and others vary from class 150 to class2500. There are PN16 through PN64 pressure numbers associated with the pressure classes as well. The Incoloy UNS N08825 Threaded Flanges, screwed flanges, plate flanges and forged flanges are produced through different manufacturing techniques.
Flange Size | 1/2" (15 NB) to 48" (1200NB) |
ASME B16.5 Flange Pressure Rating | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
ASME B16.5 Flange Pressure Calculation in DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
ASME Flange Standards | ANSI/ASME B16.5 |
Special design | As per your drawing |
Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized |
Flange Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove |
Test Certificates | EN 10204/3.1B |
Raw Materials Certificate | |
100% Radiography Test Report | |
Third Party Inspection Report, etc |
Inconel 825 Reducing Flanges
Alloy 825 Slip On Flange
ASTM B564 825 Raised Face Flange
Inconel 825 Weldoflange
Alloy 825 Lap Joint Flange
ASTM B564 825 Long WN Flange
Steel B564 825 Threaded Flange
ASTM B564 825 Plate Flange
Alloy 825 High Hub Blind Flange
ASTM B564 825 Spacer Flange
B564 825 Spade Flange
Astm B564 Uns N08825 Flanges
Standard | Class | Diameter | Bolt Circle Diameter | Number of Bolts | Bolt Size | Diameter of Bolt Hole |
---|---|---|---|---|---|---|
AS4087 | PN14 | 95 | 67 | 4 | M12 | 14 |
AS 2129 Flange | Table C | 95 | 67 | 4 | 13 | 14 |
Table D | 95 | 67 | 4 | 13 | 14 | |
Table E | 95 | 67 | 4 | 13 | 14 | |
Table F | 95 | 67 | 4 | 13 | 14 | |
Table H | 114 | 83 | 4 | 16 | 17 | |
Table J | 114 | 83 | 4 | 16 | 17 | |
ANSI B16.5 | ANSI 150 | 89 | 60 | 4 | 13 | 16 |
ANSI 300 | 95 | 67 | 4 | 13 | 16 | |
ANSI 600 | 95 | 67 | 4 | 13 | 16 | |
ANSI 900 | 121 | 83 | 4 | 19 | 22 | |
ANSI 1500 | 121 | 83 | 4 | 19 | 22 | |
ISO 7005 (DIN) Flange | PN6 | 80 | 55 | 4 | M10 | 11 |
PN10 | 95 | 65 | 4 | M12 | 14 | |
PN16 | 95 | 65 | 4 | M12 | 14 | |
PN20 | 90 | 60.5 | 4 | M14 | 16 | |
PN25 | 95 | 65 | 4 | M12 | 14 | |
PN40 | 95 | 65 | 4 | M12 | 14 |
Grade | Cr | Fe | Ni | C | Mn | Cu | Si | S |
Inconel 825 | 19.5-23.5 | 22.0 min | 38.0-46.0 | 0.05 max | 1.0 max | 1.5-3.0 | 0.5 max | 0.03 max |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.1 g/cm3 | 1370-1400 ℃ | 550 | 200 | 30 % |
STANDARD | WERKSTOFF NR. | UNS | GOST | AFNOR | JIS | BS | EN | OR |
Incoloy 825 | 2.4858 | N08825 | ЭП703 | NFE30C20DUM | NCF 825 | NA 16 | NiCr21Mo | XH38BT |