Inconel 600 Fasteners
Best Manufacturer of Nickel Alloy 600 Bolt in India with Various Grades & Types
Inconel 600 Fasteners comes in an alloy of Nickel, Chromium and Iron. For Inconel, the product comes in the variation of grade with different compositions. The ASTM B166 Inconel 600 Stud Bolts consist of an alloy containing 72 % Ni, 14 % Cr, 6 % Fe with the addition of carbon, silicon, manganese, sulfur and copper respectively. This particular type of composition gives good strength and protection against corrosion to the fasteners.
They could also be easily formed, machined and welded. The minimum tensile strength of the fasteners ranges up to 825MPa and the minimum yield strength ranges up to 620MPa. The most strength is in the cold worked round fasteners. There are different types of these fasteners such as bolts, nuts, screws, washers, etc. The dimensions range variously and the strength values of the Alloy 600 Screws and other fasteners vary with the dimensions as well. The fasteners under ½ inch diameter have the highest strength values. The fasteners can range up to 3 inches in this grade of material.
The ASTM B166 Inconel 600 Washer is used to fill in the gap between bolt heads and component surfaces to make sure that the connection is tight enough. Since these are strong, the applications that require high strength bolts use the Inconel 600 Hex Bolts. The hex bolts are particularly stronger and are preferred for the ease of installment with hex tools. The application of the Inconel 600 nut and bolt can be seen in general engineering applications, oil and gas industrial applications, aerospace, marine, construction, power generation and others.
Inconel 600 Fasteners
ASTM B166 Inconel 600 Stud Bolts
Alloy 600 Screws
Table of Content
- Specification of Inconel 600 Hex Bolt
- Most Common types of Inconel 600 Fastener
- ASTM B166 UNS N06600 Stud Bolt Size Chart
- Nickel 200 Hex Bolt Stress Areas and Threads Chart
- Inconel 600 Threaded Rod Weight Chart
- Physical Properties of Inconel 600 Alloy Stud Bolt
- Inconel 600 Rivets Mechanical Properties
- Equivalent material grade of Inconel 600 Fasteners
- Alloy 600 Fastener Chemical Composition
- DIN 2.4816 Hex Bolt Torque Chart
- What is the Heat Treatment Process for Inconel 600 Fasteners?
- How Do I Choose Between Inconel 600 and Other Inconel Alloys for Fasteners?
- What Are the Welding Considerations for Inconel 600 Fasteners?
- What is the Cost Difference Between Inconel 600 and Other Materials?
Find ASTM B166 UNS N06600 Hex Bolts & Alloy 600 Screws with Temperature Range 1100°C (2000°F), Check Specification
Inconel 600 Fasteners Sizes
- Nuts : M6 to M100
- Washers : 0.5"- 4", 10 - 100 mm
- Screw : 1/8"- 3", M4 - M80
- Machine Screws : M1.6 - M12
Length
- Length: 6 mm to 150 mm
- Thickness: 1 - 300 mm
- Density: 8.8 g/cm3
- Temp Range: -200°F to 2,000°F
Features
- High Temperature Resistance
- Good Mechanical Properties
- Workability
- Carburization Resistance
- Non-Magnetic
Finishing
- Anodizing, nickel plated, plated zinc-nickel
- Geometry, Dacroment
- Hot Dip Galvanised (HDG),
- Zinc , black oxide, BZP
Fasteners Threads
- BSW, 8UN
- METRIC
- BSF, UNC
- UNF, UNJ
Forms
- Threading
- Square
- Socket, Hex
- Oval, Round
Head Drive
- Six-Lobe
- Slotted
- Phillips
- Phillips/ Slot
Production process
- Customized
- Cold Forging
- Machining and CNC
- Hot Forging
Surface Coating
- DACROMET
- Ptfe Coated , Zinc Coated
- Xylon Coated, Phosphate
- Hot Dipped Galvanizing
- Teflon , Cadmium
Applications
- Chemical and Petrochemical Industry
- Aerospace Industry
- Nuclear Power Plants
- retorts
Testing Methods
- Impact Testing
- Hardness Testing
- Tensile Testing
- Corrosion Testing
Packaging Methods
- Foam
- Pallet
- Carton
- Small Pack
- Corrugated Box
Inconel 600 Head Cap Screw
Inconel 600 Stud Bolts
ASTM F2281 Nuts
Inconel 600 Metal Alloy Lag Bolts
Inconel 600 Steel Anchor Bolts
Inconel 600 Steel alloy Screws
ASME SF2281 Elevator Bolts
Inconel 600 Washers
Inconel 600 Alloy Head Cap screws
Inconel 600 Metal Nuts and Bolts
ASTM F2281 Hanger Bolt
Inconel 600 Steel Bolts
ASTM F2281 Eye Bolts
ASME SF2281 J-Bolts
Inconel 600 Metal Carriage Bolts
Inconel 600 Metal Alloy Hex Nuts
Inconel 600 Alloy Heavy Hex Bolts
Inconel 600 Metal Countersunk Bolts
Inconel 600 metal Alloy Belleville Washers
Inconel 600 Self Tapping Screw
Inconel 600 Steel Fasteners
Inconel 600 Alloy Hex Flange Bolts
Inconel 600 Steel Alloy Hexagon Bolts
ASTM F2281 Studs
| Bolts Dia | D | F | C | H | |||||
|---|---|---|---|---|---|---|---|---|---|
| Body Dia | Width Across Flats | Width Across Corners | Height | ||||||
| Max | Basic | Min | Max | Min | Max | Basic | Min | Max | |
| 1/2 | 0.515 | 7/8 | 0.850 | 0.875 | 0.969 | 1.010 | 11/32 | 0.302 | 0.364 |
| 7/8 | 0.895 | 1-7/16 | 1.394 | 1.438 | 1.589 | 1.660 | 37/64 | 0.531 | 0.604 |
| 5/8 | 0.642 | 1-1/16 | 1.031 | 1.062 | 1.175 | 1.227 | 27/64 | 0.378 | 0.444 |
| 3/4 | 0.768 | 1-1/4 | 1.212 | 1.250 | 1.383 | 1.443 | 1/2 | 0.455 | 0.524 |
| 1 | 1.022 | 1-5/8 | 1.575 | 1.625 | 1.796 | 1.876 | 43/64 | 0.591 | 0.700 |
| 1-3/8 | 1.404 | 2-3/16 | 2.119 | 2.188 | 2.416 | 2.526 | 29/32 | 0.810 | 0.940 |
| 1-1/8 | 1.149 | 1-13/16 | 1.756 | 1.812 | 2.002 | 2.093 | 3/4 | 0.658 | 0.780 |
| 1-1/4 | 1.277 | 2 | 1.938 | 2.00 | 2.209 | 2.309 | 27/32 | 0.749 | 0.876 |
| 2 | 2.039 | 3-1/8 | 3.025 | 3.125 | 3.449 | 3.608 | 1-11/32 | 1.175 | 1.388 |
| 1-1/2 | 1.531 | 2-3/8 | 2.300 | 2.375 | 2.622 | 2.742 | 1 | 0.902 | 1.036 |
| 1-3/4 | 1.785 | 2-3/4 | 2.662 | 2.750 | 3.035 | 3.175 | 1-5/32 | 1.054 | 1.196 |
| 2-1/4 | 2.305 | 3-1/2 | 3.388 | 3.500 | 3.862 | 4.041 | 1-1/2 | 1.327 | 1.548 |
| 2-1/2 | 2.559 | 3-7/8 | 3.750 | 3.875 | 4.275 | 4.474 | 1-21/32 | 1.479 | 1.708 |
Get Inconel 600 Nut and Bolt & 2.4816 Bolt with excellent resistance to oxidation, Check Size Chart
| Nominal Size inch. | Fine Threads – UNF | Coarse Threads – UNC | ||
|---|---|---|---|---|
| Stress AreaA, in2 | Threads inch | Stress AreaA, in2 | Threads inch | |
| 1 1/4 | 1.0730 | 12 | 0.9690 | 7 |
| 7/8 | 0.5090 | 14 | 0.4620 | 9 |
| 5/16 | 0.0580 | 24 | 0.0524 | 18 |
| 1/4 | 0.0364 | 28 | 0.0318 | 20 |
| 7/16 | 0.1187 | 20 | 0.1063 | 14 |
| 1 | 0.6630 | 12 | 0.6060 | 8 |
| 9/16 | 0.2030 | 18 | 0.1820 | 12 |
| 1/2 | 0.1599 | 20 | 0.1419 | 13 |
| 1 3/8 | 1.3150 | 12 | 1.1550 | 6 |
| 3/18 | 0.0878 | 24 | 0.0775 | 16 |
| 3/4 | 0.3730 | 16 | 0.3340 | 10 |
| 1 1/8 | 0.8560 | 12 | 0.7630 | 7 |
| 5/8 | 0.2560 | 18 | 0.2260 | 11 |
| 1 1/2 | 1.5810 | 12 | 1.4050 | 6 |
| Size (MM) | Weight per Metre | Size (UNC) | Weight per Mtr |
|---|---|---|---|
| M3 | 0.044 | ||
| M3.5 | 0.060 | ||
| M2 | 0.0187 | ||
| M2.5 | 0.030 | ||
| M4 | 0.078 | ||
| M5 | 0.124 | ||
| M10 | 0.500 | 3/8” | 0.469 |
| M12 | 0.725 | ½” | 0.896 |
| M6 | 0.177 | ¼” | 0.194 |
| M8 | 0.319 | 5/16” | 0.323 |
| M14 | 0.970 | 9/16” | 1.096 |
| M22 | 2.540 | 7/8” | 2.756 |
| M16 | 1.330 | 5/8” | 1.342 |
| M20 | 2.080 | ¾” | 2.021 |
| M24 | 3.000 | 1” | 3.638 |
| M33 | 5.900 | 1 3/8” | 6.842 |
| M27 | 3.850 | 1 1/8” | 4.545 |
| M30 | 4.750 | 1 ¼” | 5.718 |
| M42 | 9.400 | 1 ¾” | 11.231 |
| M36 | 6.900 | 1 ½” | 8.281 |
| M39 | 8.200 | 1 5/8” | 9.726 |
| M45 | 11.000 | 1 7/8” | 13.038 |
| M48 | 12.400 | 2 | 14.741 |
Affordable stockist of Inconel 600 socket head cap screws & ASME SB166 Alloy 600 Washer in Mumbai with Phosphating & Electric galvanized Finish
| Property | Value |
|---|---|
| Density | 8.47 g/cm³(8470 kg/m³) |
| Thermal Conductivity | 1.3 W/m·K |
| Specific Heat | 0.43 J/g·°C (or 430 J/kg·°C) |
| Electrical Resistivity | 0.00096 ohm·cm at 20°C (68°F) |
| Poisson's Ratio | 0.31 to 0.33 |
| Young’s Modulus | 200–210 GPa (29–30 × 10⁶ psi) |
| Hardness | 150–220 HB |
Get M5 M6 M10 Alloy 600 Fasteners & Inconel 600 Hex Bolts Including Density & Melting Point, Refer Mechanical Properties & Chemical Composition
Tensile Strength
80–100 ksi (550–690 MPa)
Yield Strength
30–45 ksi (205–310 MPa)
Melting Point
1,300°C to 1,350°C (2,372°F to 2,462°F)
Elongation
40%
Inconel 600 Fasteners Manufacturer in India offers fasteners with equivalent material grades
EN
NiCr15Fe
UNS
N06600
GOST
МНЖМц 28-2,5-1,5
BS
NA 13
JIS
NCF 600
WERKSTOFF NR.
2.4816
Inconel 600 Fasteners Manufacturer in India ensures precise chemical composition for fasteners
| Bolt Size | Torque (ft-lbs) |
|---|---|
| 1/4" | 5-7 |
| 5/16" | 8-12 |
| 3/8" | 15-20 |
| 1/2" | 30-40 |
| 5/8" | 50-60 |
| 3/4" | 80-90 |
| 1" | 160-170 |
| Process Step | Temperature |
|---|---|
| Solution Annealing | 1050°C to 1150°C (1922°F to 2102°F) |
| Rapid Cooling (Quenching) | Room Temperature |
| Aging (Optional) | 700°C to 800°C (1292°F to 1472°F) |
| Post-Treatment | Varies (Descaling/Polishing) |
| Alloy | Best For | Strength | Corrosion Resistance |
|---|---|---|---|
| Inconel 600 | High temperature | Good tensile & yield strength | Excellent |
| Inconel 625 | Superior | High tensile | Excellent |
| Inconel 718 | High strength & | Excellent tensile | Excellent in high-temp |
| Inconel 825 | Acidic environments | Good tensile strength | Good |
- ➤ Preheating
- ➤ Filler Material
- ➤ Welding Process
- ➤ Heat Input
- ➤ Post-Weld Heat Treatment
- ➤ Shielding Gas
- ➤ Cleaning
Inconel 600 Fasteners Supplier in India offers high-quality, corrosion-resistant fasteners at competitive prices.
Regal Sales Corporation can supply Inconel 600 Fasteners product in Philippines, Morocco, Brazil, Belgium, Germany, Netherlands, Peru with in 2 weeks
| Material | Typical Cost Range |
|---|---|
| Inconel 600 | $25 to $50 per kg |
| Stainless Steel (SS 304/316) | $3 to $8 per kg |
| Carbon Steel | $0.8 to $2 per kg |