The minimum yield strength of the flanges is 517MPa and the minimum tensile strength is 930MPa. These are relatively high strength flanges compared to most stainless steel flanges. The high strength of the Inconel alloy 625 Slip on Flanges and the other types comes from the material composition. The material is made up of 58% nickel, 20% chromium, carbon, manganese, silicon, sulfur and 5% iron. The high nickel and chromium content make the flanges highly corrosion resistant. The Alloy 625 Blind Flanges and other types also have very high melting point of 1350 degrees Celsius. The high melting point allows the flanges to be used in high temperature applications along with the strengths allowing these for high pressure applications as well. The flanges can range from ½ inches to 60 inches in size. The ASTM B564 Inconel 625 flanges can come in flat face, raised face, ring type joint and in different pressure classes ranging from 150 through 2500 with pressure numbers ranging from PN6 through PN64. Regal Sales Corporation is a leading manufacturer and supplier of the different types such as the Wnr 2.4856 Pipe Flange in different dimensions. Please feel free to contact us for more information on the different types such as the Nickel Alloy 625 Wnrf flanges and their pricing.
Inconel 625 Flanges
ASTM B564 UNS N06625 Slip on Flange
Alloy 625 Blind Flange
Its a most common grade of Nickel alloy flanges and mainly used for high temperature. ASTM B564 UNS N06625 flange Dimensions vary according to the ASME, ASTM, DIN and other international standards. The material has high strength values and can be used under high corrosive, acidic and chemical conditions.
Size Chart | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
---|---|
Standards | API7S-15, API7S-43, API605, ANSI/ASME B16.5, B16.47 Series A & B, B16.48, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, EN1092 |
JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
Pressure Rating ANSI | 600 LBS, 900 LBS, 150 LBS, 2500 LBS, 300 LBS, 1500 LBS |
Pressure Calculation in DIN | 16Bar 6Bar 25Bar 40Bar 10Bar / PN10 PN16 PN6 PN25 PN64 PN40 |
EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
Coating | Anti-rust Paint, Zinc Plated,Oil Black Paint, Cold and Hot Dip Galvanized, Yellow Transparent |
Production technique |
|
Connect Type/ Flange Face Type | Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Raised Face (RF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove |
Equipment | Bending machine, Pushing Machine,Press machine, electric bevelling machine, Sand-blasting machine etc |
Origin | Indian / West Europe / Japan / USA / Korean |
Special design |
As per your drawing AS, ANSI, BS, DIN and JIS |
Test | Hydrostatic testing machine, X-ray detector, Direct-reading Spectrograph, UI trasonic flaw detector, Magnetic particle detector |
Most common types | Forged / Threaded / Screwed / Plate |
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Manufacturer of |
ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
|
Uses & application |
|
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
Price of Inconel 625 Flanges | Alloy 625 Flange Price in India (INR) | Alloy 625 Flange Price in USD | Alloy 625 Flange Price in UAE Dirham |
---|---|---|---|
BLIND FLANGE, 2-1/16 10K BX-152, INCONEL 625 | INR 77,034 | $1028.09 | 3776.11 UAE Dirham |
INCONEL 625 FLANGES 113/16API 10000 # RTJ | INR 44,659 | $596.02 | 2189.13 UAE Dirham |
INCONEL.625 FLANGES INCONEL 625 FLANGES 2 BL 300 POUND RJ | INR 19,599 | $261.57 | 960.72 UAE Dirham |
DIN 2.4856 Reducing Flanges
Inconel Alloy 625 Reducing Flanges
JIS NCF 625 RTJ Flange
Forged Flange Inconel 625 socket weld Flanges 4" SCH40s
Inconel 625 Slip on flange
Inconel 625 Spectacle Blind Flange
ASTM B 564 UNS N06625 inconel 625 Slip on Flange ASME B16.5 (SOF)
Inconel 625 Blind flange
Nickel 625 Lap Joint Flange
625 Inconel ASME SB564 Threaded Flange
Inconel 625 BS4504 Tongue & Groove Flanges
WERKSTOFF Nr 2.4856 Blind Flange
Inconel 625 Weld Neck Flanges
UNS N06625 Orifice Flange
ASME 16.5 Inconel Alloy 625 Slip On Raised Face Flange
Inconel 625 Socket Weld Flanges
Inconel Grade 625 Socket Weld Flanges
3/4" 150# Inconel Alloy ASTM AB564 NO6625 Weld Neck Flanges
Nickel Alloy Inconel 625 Blind BL flanges 1" DN25 Class300 ANSI B16.5 Forged RF
Inconel 625 Spectacle Blind Flanges
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Inconel 625 | 2.4856 | N06625 | NCF 625 | NA 21 | ХН75МБТЮ | NC22DNB4MNiCr22Mo9Nb | NiCr23Fe |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Inconel 625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
Inconel 625 | 0.10 max | 0.50 max | 0.50 max | 0.015max | – | 5.0 max | 58.0 min | 20.0 – 23.0 |
Inconel 625 5D Weldoflange | Nickel 625 Flange Outlet |
Inconel 625 UNS N06625 Forged Flanges | Inconel 625 ASTM B564 Plate Flange |
625 Inconel Slip on Flange | ASTM B564 UNS N06625 Threaded Flange |
Inconel 625 UNS N06625 Reducing Flange | Inconel alloy 625 Socket Weld Flange |
ASTM B564 UNS N06625 Weld Neck Flanges | Inconel 625 Lap Joint Flanges |
Nickel Alloy 625 Long Weld Neck Flanges | Inconel 625 UNS N06625 Spectacle Blind Flanges |
ASTM B564 UNS N06625 Spades & Ring Spacers | Inconel alloy 625 Nipoflange |
Inconel 625 UNS N06625 Ring Type Joint Flanges | Inconel alloy 625 Raised Face Flanges |
Inconel 625 Tongue and Groove Flanges | Inconel 625 ASTM B564 Male and Female Flange |
Nickel 625 WNRF Flange | 625 Inconel RTJ Flange |
Nickel 625 Flanges | 625 Inconel BS 10 Flanges |
Inconel 625 BS 4504 Flanges | Inconel alloy 625 EN 1092-1 Flanges |
Inconel 625 UNS N06625 Flange | Inconel 625 Blind Flange |
Nickel Alloy 625 SORF Flange | Inconel 625 UNS N06625 BLRF Flange |
Inconel 625 UNS N06625 PN16 blind flange | Alloy 625 Forged Socket Weld Pipe Flange |
Inconel 625 Class 300 slip on flange | ASTM B564 UNS N06625 Slip On Weld Flange |
625 Inconel Forged steel slip on flanges | 625 Inconel Race face slip on flange |
Nickel 625 SWRF Flange | Alloy 625 Forged blind flange |
Inconel 625 groove weld neck flange | Nickel Alloy 625 Socket Weld Hub Flange |
625 Inconel BS 4504 pn16 flange | Inconel 625 UNS N06625 EN 1092-1 flat flange |
Alloy 625 Raised Face Flanges | Nickel Alloy 625 Flat Faced Plate Flanges |
Nickel 625 threaded lap joint flange | Alloy 625 Slip On Integral flange |
Inconel 625 Forged integral puddle flange | 625 Inconel table e long weld neck |
Inconel 625 UNS N06625 Class 150 LBS Flange | Inconel 625 ASTM B564 PN10 Forged Flanges |
Inconel 625 RTJ Flanges | ASTM B564 UNS N06625 PN10 Plate Flanges |
Inconel 625 UNS N06625 Tongue & Groove Flanges | Inconel 625 Reducing Flanges |
625 Inconel Class 150 reducing threaded flange | 625 Inconel Class 150 Pipe Flange |
Nickel Alloy 625 Class 150 Flange | Alloy 625 Pipe Flanges |
Inconel 625 Series a Lap Joint Ring Flange | Inconel alloy 625 Class 300 threaded flange |
ASTM B564 UNS N06625 Reducing Flanges | Inconel 625 UNS N06625 ASME B16.5 Flanges |
Inconel 625 UNS N06625 BS 10 Flanges | Inconel 625 DIN 2.4856 Class 150 Tongue & Groove Flanges |
Inconel alloy 625 Bleed Rings | Inconel 625 UNS N06625 Class 150 Weldoflange |
625 Inconel Class 150 LBS Nipo Flange | Inconel 625 UNS N06625 Long Weld Neck Flanges |
Nickel Alloy 625 Lap Joint Pipe Flanges | Nickel Alloy 625 PN16 Screwed Flanges |
Nominal Size |
Outside Diameter (OD) |
Min. Thickness (T) |
RF Dia. (R) |
No. of Bolt Holes | Diameter of Holes |
Bolt Circle (BC) |
SO Bore ID (SB) |
WN Bore ID (WB) |
Dia. Hub Base (HB) |
Dia. of Hub Top (HT) |
SO LTH (SL) |
WN LTH (WL) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
1⁄2 | 3.50 | 0.38 | 1.38 | 4 | 0.62 | 2.38 | 0.88 | 0.62 | 1.19 | 0.84 | 0.56 | 1.81 |
3⁄4 | 3.88 | 0.44 | 1.69 | 4 | 0.62 | 2.75 | 1.09 | 0.82 | 1.50 | 1.05 | 0.56 | 2.00 |
1 | 4.25 | 0.50 | 2.00 | 4 | 0.62 | 3.12 | 1.36 | 1.05 | 1.94 | 1.32 | 0.62 | 2.12 |
11⁄4 | 4.62 | 0.56 | 2.50 | 4 | 0.62 | 3.50 | 1.70 | 1.38 | 2.31 | 1.66 | 0.75 | 2.19 |
11⁄2 | 5.00 | 0.62 | 2.88 | 4 | 0.62 | 3.88 | 1.95 | 1.61 | 2.56 | 1.90 | 0.81 | 2.38 |
2 | 6.00 | 0.69 | 3.62 | 4 | 0.75 | 4.75 | 2.44 | 2.07 | 3.06 | 2.38 | 0.94 | 2.44 |
21⁄2 | 7.00 | 0.81 | 4.12 | 4 | 0.75 | 5.50 | 2.94 | 2.47 | 3.56 | 2.88 | 1.06 | 2.69 |
3 | 7.50 | 0.88 | 5.00 | 4 | 0.75 | 6.00 | 3.57 | 3.07 | 4.25 | 3.50 | 1.12 | 2.69 |
31⁄2 | 8.50 | 0.88 | 5.50 | 8 | 0.75 | 7.00 | 4.07 | 3.55 | 4.81 | 4.00 | 1.19 | 2.75 |
4 | 9.00 | 0.88 | 6.19 | 8 | 0.75 | 7.50 | 4.57 | 4.03 | 5.31 | 4.50 | 1.25 | 2.94 |
5 | 10.00 | 0.88 | 7.31 | 8 | 0.88 | 8.50 | 5.66 | 5.05 | 6.44 | 5.56 | 1.38 | 3.44 |
6 | 11.00 | 0.94 | 8.50 | 8 | 0.88 | 9.50 | 6.72 | 6.07 | 7.56 | 6.63 | 1.50 | 3.44 |
8 | 13.50 | 1.06 | 10.62 | 8 | 0.88 | 11.75 | 8.72 | 7.98 | 9.69 | 8.63 | 1.69 | 3.94 |
10 | 16.00 | 1.12 | 12.75 | 12 | 1.00 | 14.25 | 10.88 | 10.02 | 12.00 | 10.75 | 1.88 | 3.94 |
12 | 19.00 | 1.19 | 15.00 | 12 | 1.00 | 17.00 | 12.88 | 12.00 | 14.38 | 12.75 | 2.12 | 4.44 |
14 | 21.00 | 1.31 | 16.25 | 12 | 1.12 | 18.75 | 14.14 | 13.25 | 15.75 | 14.00 | 2.19 | 4.94 |
16 | 23.50 | 1.38 | 18.50 | 16 | 1.12 | 21.25 | 16.16 | 15.25 | 18.00 | 16.00 | 2.44 | 4.94 |
18 | 25.00 | 1.50 | 21.00 | 16 | 1.25 | 22.75 | 18.18 | 17.25 | 19.88 | 18.00 | 2.62 | 5.44 |
20 | 27.50 | 1.62 | 23.00 | 20 | 1.25 | 25.00 | 20.20 | 19.25 | 22.00 | 20.00 | 2.81 | 5.62 |
22 | 29.50 | 1.75 | 25.25 | 20 | 1.38 | 27.25 | 22.22 | 21.25 | 24.25 | 22.00 | 3.07 | 5.82 |
24 | 32.00 | 1.81 | 27.25 | 20 | 1.38 | 29.50 | 24.25 | 23.25 | 26.12 | 24.00 | 3.19 | 5.94 |
Standard |
Class |
Diameter |
Bolt Circle Diameter |
Number of Bolts |
Bolt Size |
Diameter of Bolt Hole |
---|---|---|---|---|---|---|
AS4087 Flanges |
PN14 Flanges |
95 |
67 |
4 |
M12 |
14 |
AS 2129 Flange
|
Table C Flanges |
95 |
67 |
4 |
13 |
14 |
Table D Flanges |
95 |
67 |
4 |
13 |
14 |
|
Table E Flanges |
95 |
67 |
4 |
13 |
14 |
|
Table F Flanges |
95 |
67 |
4 |
13 |
14 |
|
Table H Flanges |
114 |
83 |
4 |
16 |
17 |
|
Table J Flanges |
114 |
83 |
4 |
16 |
17 |
|
ANSI B16.5 Flanges
|
ANSI 150 Flanges |
89 |
60 |
4 |
13 |
16 |
ANSI 300 Flanges |
95 |
67 |
4 |
13 |
16 |
|
ANSI 600 Flanges |
95 |
67 |
4 |
13 |
16 |
|
ANSI 900 Flanges |
121 |
83 |
4 |
19 |
22 |
|
ANSI 1500 Flanges |
121 |
83 |
4 |
19 |
22 |
|
ISO 7005 (DIN) Flange
|
PN6 Flanges |
80 |
55 |
4 |
M10 |
11 |
PN10 Flanges |
95 |
65 |
4 |
M12 |
14 |
|
PN16 Flanges |
95 |
65 |
4 |
M12 |
14 |
|
PN20 Flanges |
90 |
60.5 |
4 |
M14 |
16 |
|
PN25 Flanges |
95 |
65 |
4 |
M12 |
14 |
|
PN40 Flanges |
95 |
65 |
4 |
M12 |
14 |