Inconel Flanges Manufacturer

Inconel Pipe Flanges Suppliers.

Inconel Flanges Manufacturers in India, Inconel Overlay Flanges Exporter in Mumbai.

Regal Sales Corporation is one of the recommended manufacturer of Inconel Flanges In India. Our ASTM B564 Alloy Flanges is a family of austenitic nickel-chromium-based superalloys. Type Inconel Lap Joint Flanges are oxidation-corrosion-resistant materials well suited for service in extreme environments subjected to pressure and heat. Type Inconel Blind Flanges can also be roll-threaded after full aging by using induction heat to 1,300 °F (704 °C) without increasing the grain size. Inconel Plate Flanges is retains strength over a wide temperature range, attractive for high-temperature applications where aluminium and steel would succumb to creep as a result of thermally induced crystal vacancies. Inconel Slip On Flange (SORF) high temperature strength is developed by solid solution strengthening or precipitation hardening, depending on the alloy. Inconel Flat Face Flange it is important part of inconel flange family.

Inconel Blank Flange is forged at 1038 to 1233°C (1900 to 2250°F). Inconel Weld Neck Flange is annealed at 1149°C (2100°F).

Our Inconel Flange cooled at temperatures ranging from 538 to 760°C (1000 to 1400°F) in order to prevent thermal cracking. We believe in customers satisfaction with our product and quality of product which we gonna supply to our customers. The benefits of our Inconel Flanges include a long service life that will retain an attractive, clean finish with low maintenance cost, therefore contact us.

Get suitable Inconel Flanges suppliers in South Africa, Malaysia, Singapore, UK, Philippines, Australia and UAE.

Inconel Flange Price in India, Inconel Flanges Sizes and Specifications.

Inconel Flanges manufacturers in India

Regal Sales Corporation is manufacturer of Inconel Flanges, forged, ASTM B564 (dual marked and certified), ASME B16.5, annealed and fully machined, raised face, smooth finish (125-250 RMS / 3.2-6.3µM) to MSS-SP6, SS Flange hardness as per NACE MR0175 and tested to ASTM A262 E and PMI.

ASTM B564 Anchor Flange


ASTM B564 Anchor Flange

ASTM B564 Screw Flange


ASTM B564 Screw Flange

Inconel Flanges Specification and Standards

Specifications Inconel Flanges
ASME B16.5 Inconel Flange size range 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Inconel Flanges Standards ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges.
Inconel Flange Standard ANSI Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Inconel Flange Standard DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
Inconel Flange Standard JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
Inconel Flange Standard UNI 6Bar 10Bar 16Bar 25Bar 40Bar
Inconel Flange Standard EN 6Bar 10Bar 16Bar 25Bar 40Bar
Main Types Forged / Threaded / Screwed / Plate
Flange supporting material Gasket, Ring Joint, Flange Bolts
Inconel Pipe Flanges Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Most common types of Inconel Flanges
  • Weld Neck Ring Flange (WNRF), Inconel
  • Slip-On Ring Flange (SORF), Inconel
  • Blind Ring Flange (BLRF), Inconel
  • Socket Weld Ring Flange (SWRF), Inconel
  • Threaded Ring Flange, Inconel
  • Lap Joint Ring Flange (LJRF), Inconel
  • Ring Type Joint Flange (RTJF), Inconel
Production technique
  • Forged, Heat treated and machined
Connect Type/ Flange Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

Inconel Threaded Flange, Socketweld Flange, Slip-On Flange, Blind Flange, Weld Neck Flange

Test Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Equipment Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Origin Indian / West Europe / Japan / USA / Korean
Specialized manufacturer of
  • Rtj Flange
  • Pn16 Flange
  • DIN 2566 pn16
  • DIN 2566 en 1092 1
  • DIN 2566 pn10
  • Inconel Large Diameter Flange
  • Inconel Sorf Flange
  • Inconel Blind Flanges
  • Inconel Table Flanges
  • Inconel Weld Neck Flanges
  • Inconel Threaded Flanges
  • Inconel Slip-On Flanges
  • Inconel Socketweld Flanges
  • Inconel Plate Flanges
  • Inconel Lap Joint Flanges
  • Inconel Loose Flanges
  • Inconel Orifice Flanges
  • Inconel AS 4087 Water Flanges
Inconel Flanges Standard

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

  • B.S: BS4504 , BS3293, BS1560, BS10
  • AS 2129: Table D; Table E; Table H
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • American standard (ANSI)
  • German (DIN)
  • British standard (BS)
  • Any other specilised flanges
  • DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
  • The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
Key markets and industries for Inconel Flanges
  • Bitumen upgraders.
  • Heavy oil refineries.
  • Nuclear power (mostly seamless).
  • Petrochemicals and acids.
Export to Ireland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc
Inconel Flanges Application
  • To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Inconel Pipe Flange Dimensions

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
  • ASME B1.20.1, Pipe Threads, General Purpose
  • ASME B16.1, Cast Iron Flanges and Flanged Fittings Classes 25, 125 and 250
  • ASME B16.5, Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24
  • ASME B16.11, Forged Fittings, Socket Welding and Threaded
  • ASME B16.25, Buttwelding Ends
  • ASME B16.36, Orifice Flanges
  • ASME B16.47, Large Diameter Steel Flanges NPS 26 Through NPS 60
  • ASME B31.1, Power Piping
  • ASME B31.3, Process Piping
  • ASME B46.1, Surface Texture (Surface Roughness, Waviness, and Lay)

Prestige quality Inconel Flanges manufacturers in India offer these Inconel Flanges in DIN, ISO, JIS or ANSI standard.

Alloy Flanges Weight Chart

15mm (1/2") Inconel Flange Weight Chart

Standard Class Diameter Bolt Circle Diameter Number of Bolts Bolt Size Diameter of Bolt Hole
AS4087 Flanges PN14 Flanges 95 67 4 M12 14
AS 2129 Flange Table C Flanges 95 67 4 13 14
Table D Flanges 95 67 4 13 14
Table E Flanges 95 67 4 13 14
Table F Flanges 95 67 4 13 14
Table H Flanges 114 83 4 16 17
Table J Flanges 114 83 4 16 17
ANSI B16.5 Flanges ANSI 150 Flanges 89 60 4 13 16
ANSI 300 Flanges 95 67 4 13 16
ANSI 600 Flanges 95 67 4 13 16
ANSI 900 Flanges 121 83 4 19 22
ANSI 1500 Flanges 121 83 4 19 22
ISO 7005 (DIN) Flange PN6 Flanges 80 55 4 M10 11
PN10 Flanges 95 65 4 M12 14
PN16 Flanges 95 65 4 M12 14
PN20 Flanges 90 60.5 4 M14 16
PN25 Flanges 95 65 4 M12 14
PN40 Flanges 95 65 4 M12 14

Regal Sales Corporation is an ISO certified Inconel Flanges manufacturer & distributor in India

Regal Sales Corporation is a manufacturer and supplier of Inconel Flanges offering in all Ratings up to 2500#, built a distribution network with more then 65 countries globally.

ASTM B564 Pipe Flanges Alloy Raised Face Slip On Flanges
ASTM B564 Exhaust Flanges ASME SB564 Slip On Plate Flanges
ASTM B564 Header Flanges Inconel Slip On Flanges
ASTM B564 Plate Flanges B564 Pipe Flanges
ASTM B564 Backing Flanges Alloy Exhaust Flanges
ASTM B564 Tube Flanges ASME SB564 Header Flanges
ASTM B564 Stub End Flanges Alloy Raised Face Weld Neck Flanges
ASTM B564 Shower Rod Flanges ASTM B564 Sae Flanges
ASTM B564 Slip On Flanges Inconel Weld Neck Flange
ASTM B564 Screwed Flanges ASTM B564 Clad Flanges
ASTM B564 Socket Weld Flanges ASTM B564 Inconel WNRF Flange
ASTM B564 Sbc Header Flanges Alloy Raised Face Blind Flanges
ASTM B564 Split Flanges ASME SB564 Blind Flanges
ASTM B564 Slip-On Pipe Flanges Inconel Blind Flange
ASTM B564 Square Flanges ASTM B564 Ansi Flanges
Ansi 150 ASTM B564 Flanges ASTM B564 Inconel BLRF Flanges
ASTM B564 Blank Flanges Alloy Orifice Flanges
ASTM B564 Bsp Flanges ASME SB564 Orifice Flanges
ASTM B564 Companion Flanges Inconel Orifice Flanges
ASTM B564 Class 150 Flanges ASTM B564 Duct Flanges
ASTM B564 Cover Flanges B564 Inconel Orifice Flanges
Custom ASTM B564 Flanges Alloy Socket weld Flanges
Class 600 ASTM B564 Flanges ASME SB564 Socket weld Flanges
ASTM B564 Din Flanges Inconel Socket weld Flanges
Large Diameter ASTM B564 Flanges ASTM B564 SWRF Flanges
Table E ASTM B564 Flanges ASME B16.5 Inconel Socket weld Flanges
ASTM B564 Floor Flanges Alloy Threaded Flanges
ASTM B564 Forged Flanges ASME SB564 Threaded Flanges
Gaskets For ASTM B564 Flanges Inconel Threaded Flanges
ASTM B564 Handrail Flanges ASTM B564 Manifold Flanges
High Pressure ASTM B564 Flanges ASTM B564 Threaded Flanges
ASTM B564 Lap Joint Flanges ASTM B564 Inconel Threaded Flanges
ASTM B564 Long Weld Neck Flanges Alloy Long weld Neck Flanges
ASTM B564 Metric Flanges ASME SB564 Long weld Neck Flanges
ASTM B564 Muffler Flanges Inconel Long weld Neck Flanges
ASTM B564 Pump Flanges ASTM B564 Orifice Flanges
ASTM B564 Pressed Flanges Alloy Ring Type Joint Flanges
ASTM B564 Puddle Flanges ASME SB564 Ring Type Joint Flange
ASTM B564 Pad Flanges Inconel RTJ Flanges
ASTM B564 Reducing Flanges Alloy RTJ Flanges
ASTM B564 Raised Face Flanges ASTM B564 RTJ Flanges
ASTM B564 Ring Flanges BS4504 Inconel RTJ Flanges
ASTM B564 Threaded Reducing Flanges Alloy Reducing Flanges
ASTM B564 Wnrf Flanges ASME SB564 Reducing Flanges
ASTM B564 Split Flanges Inconel Reducing Flange
ASTM B564 Turbo Flanges ASTM B564 Forged Flanges
ASTM B564 Vacuum Flanges ASTM B564 Reducing Flange
ASTM B564 Inconel Reducing Flanges Inconel Forged Flange

Manufacturing Inconel Flanges in India, Regal Sales Corporation holds a wide range of Inconel Flanges in stock for immediate despatch throughout India & globally.

Special offer on:

Flange Schedule/Class Pipe Size - Pipe Flanges Flange Connection Type Flange Material Max. Pressure
ASME B16.5 Class 150 1/2" FNPT Inconel 150 psi
ASME B16.5 Class 150 1/2" Socket Weld Forged Inconel 275 psi
ASME B16.5 Class 150 1/2" Welded Inconel 150 psi
ASME B16.5 Class 150 3/4" FNPT Inconel 150 psi
ASME B16.5 Class 150 3/4" Socket Weld Forged Inconel 275 psi
ASME B16.5 Class 150 1-1/4" Socket Weld Forged Inconel 275 psi
ASME B16.5 Class 150 1-1/2" Socket Weld Forged Inconel 275 psi
ASME B16.5 Class 150 2" FNPT Inconel 150 psi
ASME B16.5 Class 150 2" Socket Weld Forged Inconel 275 psi
ASME B16.5 Class 150 2-1/2" Socket Weld Forged Inconel 275 psi
ASME B16.5 Class 150 3" Socket Weld Forged Inconel 275 psi
ASME B16.5 Class 150 4" FNPT Inconel 150 psi
ASME B16.5 Class 150 4" Socket Weld Forged Inconel 275 psi
ASME B16.5 Class 300 1/2" Slip On Forged Inconel 720 psi
ASME B16.5 Class 300 1/2" Slip On Forged Inconel 720 psi
ASME B16.5 Class 300 1" Slip On Forged Inconel 720 psi
ASME B16.5 Class 300 1" Slip On Forged Inconel 720 psi
ASME B16.5 Class 300 1-1/4" FNPT Forged Inconel 720 psi
ASME B16.5 Class 300 1-1/4" Slip On Forged Inconel 720 psi
ASME B16.5 Class 300 1-1/2" Slip On Forged Inconel 720 psi
ASME B16.5 Class 300 1-1/2" Slip On Forged Inconel 720 psi
ASME B16.5 Class 300 2" Slip On Forged Inconel 720 psi
ASME B16.5 Class 300 2" Slip On Forged Inconel 720 psi
ASME B16.5 Class 300 2-1/2" Slip On Forged Inconel 720 psi
ASME B16.5 Class 300 2-1/2" Slip On Forged Inconel 720 psi
ASME B16.5 Class 300 3" Slip On Forged Inconel 720 psi
ASME B16.5 Class 300 3" Slip On Forged Inconel 720 psi
ASME B16.5 Class 300 4" Slip On Forged Inconel 720 psi
ASME B16.5 Class 300 4" Slip On Forged Inconel 720 psi

Alloy Forged and Plate Flange

ASTM B564 Alloy Slip-On Flange ASTM B564 Alloy Threaded Flange
ASTM B564 Alloy Weld Neck Flange ASTM B564 Alloy Socket Weld Flange
ASTM B564 Alloy Blind Flange ASTM B564 Alloy Reducing Flange
ASTM B564 Alloy Lap Joint Flange ASTM B564 Alloy Plate Flange
ASTM B564 Alloy Orifice Flange ASTM B564 Alloy Forged Flange
ASTM B564 Alloy Ring Type Joint Flange ASTM B564 Alloy Square Flange

Inconel Pipe Flange Pressure Ratings

Inconel Flanges Flange Standards / Types and Pressure Class :

ASME/ANSI B 16.36 Welding Neck Flange, Slip on Flange, Threaded Flange
PRESSURE CLASS 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.5 Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47 Welding Neck Flange, Blind Flange [Series A & B]
PRESSURE CLASS 75, 150, 300, 400, 600, 900
BS 4504 SEC 3.1 Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 40
BS 4504[PART 1] Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 400
BS 1560 BOSS Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
BS10 Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE D, E, F, H
DIN FLANGES DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS PN 6 TO PN 100

Inconel Flanges useful information

Click on below links for Alloy flanges dimensions

Find a Inconel Flanges distributor in your location:

Regal Sales Corporation is a Govt. approved certified Inconel Flanges exporter in India. All of our Inconel Flanges are manufactured and tested to international standards, and specifications as per DIN, JIS, EN, ASTM etc. Regal Sales Corporation is known as a trusted vendor as a Inconel Flanges distributor & dealer in your country. We have huge stock in Asia, GCC, Gulf, Middle east, UK to supply with over 28 countries, we provide after sales service and fast delivery.

MIDDLE EAST

  • Saudi Arabia (KSA)
  • UAE
  • Iran
  • Iraq
  • Jordan
  • Qatar
  • Bahrain
  • Oman
  • Kuwait
  • Turkey
  • Yemen
  • Syria
  • Cyprus

AFRICA

  • South Africa
  • Nigeria
  • Algeria
  • Angola
  • Libya
  • Egypt
  • Gabon
  • Sudan
  • Equatorial Guinea
  • The Republic Of Congo
NORTH AMERICA
  • USA
  • Canada
  • Mexico
  • Panama
  • Costa Rica
  • Puerto Rica
  • Trinidad And Tobago
  • Jamaica
  • Bahamas
  • Denmark

EUROPE

  • UK
  • Netherland
  • Russia
  • Norway
  • Germany
  • France
  • Italy
  • Spain
  • Ukraine
  • Belgium
  • Greece
  • Hungary
  • Albania
  • Austria
  • Finland
  • Ireland
  • Croatia
  • Slovenia
  • Malta
  • Switzerland
  • Slovakia
  • Czech Republic
  • Portugal

ASIA

  • Malaysia
  • India
  • Taiwan
  • Cambodia
  • Singapore
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Sri Lanka
  • Maldives
  • Bangladesh
  • Mayanmar
SOUTH AMERICA
  • Venezuela
  • Argentina
  • Bolivia
  • Colombia
  • Ecuador
  • Guyana
  • Paraguay
  • Uruguay
  • Brazil
  • Chile
Stock an extensive range of Inconel Flanges, Inconel Flanges suppliers in Mumbai, India
Manufacting high-class Inconel Flanges in India, offer lowest price of Inconel Flangesa, contact Inconel Flanges manufacturers in Mumbai, Pune & Chennai - India