Monel K500 Fasteners
Monel K500 Fasteners are made up of a nickel copper alloy with 63% nickel and 27% copper in the composition. The material has carbon, manganese, iron, sulfur, silicon, aluminum and titanium for stabilization as well. The Monel K500 Bolts have higher corrosion resistance than the Monel 400 fasteners. The fasteners also have high strength and can be age hardened. So the effect is long lasting and the fasteners are cost effective. The material is denser than most materials with 8.44 grams per centimeter cube density.
Monel K500 Fasteners
Alloy UNS N05500 Bolts
ASTM B865-04 K500 Monel Screws
The Alloy UNS N05500 Bolts have 1100MPa minimum tensile strength, 790MPa minimum yield strength, 25% elongation rate and 1350 degrees Celsius melting point. These mechanical properties allow the ASTM B865-04 K500 Monel Fasteners to be used in high temperature, high pressure, high strength applications. The material is also one of the best suiting materials for cryogenic applications. There are different types of fasteners such as threaded rods, bolts, screws, studs, nuts and washers. They come under all international standards with different dimensions. The size of the fasteners range from 3/6 inches to 2 inches with the lengths varying from 3mm to 200mm. The Monel K500 Threaded Rod is stronger than other material grades so that it could be applied in heavy load bearing applications to connect two components and can withstand high tension. The Monel k500 Bolts and Nuts are used in heat exchangers, marine engineering, pumps, shafts and valves, fittings, chemical processing equipment and other high strength applications. The industries where the Monel k500 Socket Head Cap Screws are used are offshore oil drilling, sensors, non-magnetic housings, safety lifts and in the making of springs, cables and chains for use in marine environments.
Table of Content
| Material | Monel K500 Alloy Fasteners |
|---|---|
| Monel K500 Fasteners ASTM / ANSI | ASTM B865-04 / ASME SB865-04 |
| Size of Monel K500 Fasteners | M02 to M160 |
| Length of Monel K500 Fasteners | 3 mm to 200 mm |
| Monel K500 Fasteners Threads: | BSW, UNC, BSF, UNF METRIC, or as required |
| M3, M14, M2.5, M2, M12, M5, M6, M4, M20, M16, M30, M24, M36, M8, M10 etc. | |
| Monel K500 Fasteners Standard: | JIS, ASTM,BS, GB, DIN, IS, ISO
DIN: DIN 931, DIN 970, 934 DIN DIN 933 UTS – Unified Thread Standard : NPTF, UNS, NPT, UNF, UNC, UNEF ISO – International Organization for Standardization : ISO 4033 ,ISO 4032, JIS standards |
| Widely Use Monel K500 400 Bolts Types | Monel K500 Hex Head Bolt, Hex Bolt, Square Bolt, Eye Bolt, T Bolt, U Bolt, Lag Bolt, Counter sunk Bolt etc. |
| Widely Use Monel K500 Nut Types | Monel K500 Coupling Nut, Hex Head Nut, Wing Nut, Square Nut, Panel Nut, T Nut, Acorn Nuts, Dome Nut, Eye Nut, Lock Nut etc. |
| Widely Use Monel K500 Screw Types | Monel K500 Threaded Screw, Hex Head Screw, Socket Head Screw, Socket Set Screw, Blind Rivet, Concrete Screw, Shoulder Screw, Anchor Screw, Panel Screw, Machine Screw etc. |
| Widely Use Monel K500 Washer Types | Monel K500 Lock Washer, Machine Washers, Star Washers, Sealing Washer, Split Washer etc. |
| Widely Use Monel K500 Studs Types | Monel K500 Double Ended Studs, Threaded Tod, Tie Bars, Tie Rodsetc. |
| Scope of Manufacture |
|
| Monel K500 Fasteners In Form of: | Square, Round, Threading as per Gauge,Round Etc. |
| Test Certificate of Monel Bolting : | EN 10204 / 3.1 |
| Finishing of Monel K500 Fasteners: | Zinc (yellow, white, blue, black), black oxide, Dacroment, Geometry, nickel plated, anodizing, plated zinc-nickel, Stainless steel: Passivated Bright Zinc Plated (BZP), Self-Colour, Hot Dip Galvanised (HDG), Stainless Steel, Sherardized,Mechanically Applied coating and some special one like DACROMET |
| Monel K500 Fasteners Production process | hot forging M24-M100, M2-M24: Cold Froging for Customized connecting element machining and CNC |
| Monel K500 bolts Head drive: | Six-Lobe, Phillips/Slot, Slotted, Phillips etc |
| Surface Coating of Monel K500 Fasteners materials: |
|
| Top Manufacturers of Fasteners | SPAX® Screws, EBY Fastener, Sundaram Kundan, GKW, Infasco, Precision, APL, Unbrako,Etc. |
| Packing of Monel K500 Fasteners: | In Bulk: pallet, Canton, Small Carton / Boxs / Pallet, or customer request |
| Specialized manufacturer of | Monel K500 High Tensile Fasteners, Bolts |
| Monel K500 Fasteners Test Certificates |
|
F467 N05500 Stud Bolts
N05500 Threaded Rod
F467 Double Ended Studs
Monel UNS N05500 Carriage Bolts
DIN2.4375 Monel Countersunk Bolts
Monel K500 Flange Bolts
Monel K500 Heavy Hex Bolts
Monel K500 Square Bolts
UNS N05500 Square Nuts
N05500 Hex Head Nuts
Monel K500 Dock Washers
DIN2.4375 Monel Alloy Lock Washers
Element
|
Content (%)
|
Nickel, Ni
|
63.0-70.0
|
Silicon, Si
|
.50 max
|
Carbon, C
|
.25 max
|
Sulphur, S
|
.01 max
|
Copper, Cu
|
-
|
Iron, Fe
|
2.0 max
|
Manganese, Mn
|
1.5 max
|
Properties
|
Metric
|
Imperial
|
Tensile strength(annealed)
|
517-620 MPa
|
75-90 ksi
|
Yield strength
|
172-345 MPa
|
25-50 ksi
|
Modulus of elasticity
|
179 GPa
|
26000 ksi
|
Poisson’s ratio
|
0.32
|
0.32
|
Alloy
|
Common Name
|
Related Specification
|
|||
|---|---|---|---|---|---|
British
|
European
|
ASTM
|
UNS
|
||
Alloy K500
|
Monel K500 ®
|
BS 3076 NA18
|
2.4375
|
B865-04
|
N05500
|