Nickel Alloy Flanges Manufacturer

Nickel 200 Flanges, Nickel Alloy Flanges Suppliers

Nickel Plate Flanges Manufacturers India, UNS N02200 Nickel Flanges Exporter in Mumbai

Nickel Alloy Flanges Manufacturer
Nickel Alloy Flanges Manufacturer
Nickel Plate Flanges Supplier
Nickel Plate Flanges Supplier
Nickel 200 Flanges
Nickel 200 Flanges

Regal Sales Corporation is one of the recommended manufacturer Of Nickel Flanges In India. Our Nickel Alloy Collar Flanges is comprise 2 to 30% nickel and have high oxidation resistance and stress corrosion cracking resistance. Type Nickel 200 Lap Joint Flanges is high oxidation resistance is seen in moist air and steam. Type Nickel Blind Flanges (BLRF) are thermally stable and possess moderate strength even when the temperature is high. Nickel Plate Flanges corrosion resistance and strength of these alloys are improved by the addition of manganese, iron, niobium, and or chromium. ASTM B564 Nickel Slip On Flange have good fabricability and high inherent resistance to biofouling. Nickel Flat Face Flange it is important part of Cupro-Nickel flange family.

Nickel Spectacle Blind Flange & Nickel Threaded Flange provides with single phase alpha structures. Nickel 201 Welding Neck Flange annealed at temperatures between 649 and 816°C (1and 1500°F).

Our Nickel Flange copper nickel alloys have great resistance to sea water-related corrosion due to the presence of significant amounts of manganese and iron. Exporter of Nickel 200 RF Flanges. The benefits of our Nickel UNS N02200 FF Flanges include a long service life that will retain an attractive, clean finish with low maintenance cost.

ASTM B564 High Nickel Alloy Flange Weight, DIN 2.4066 Nickel Alloy Flanges Pressure Rating.

Nickel Flanges manufacturers in India

Regal Sales Corporation is manufacturer of Nickel Alloy Flanges, forged, ASTM B564 201 (dual marked and certified), ASME B16.5, annealed and fully machined, raised face, smooth finish (125-250 RMS / 3.2-6.3µM) to MSS-SP6, SS 200 Flange hardness as per NACE MR0175 and tested to ASTM A262 E and PMI.

ASTM B564 Grade 201 Orifice Flange


ASTM B564 Grade 201 Orifice Flange

SA 182 201 Blank Flange


SA 182 201 Blank Flange

ASTM B564 201 Anchor Flange


ASTM B564 201 Anchor Flange

ASTM B564 201 Screw Flange


ASTM B564 201 Screw Flange

Nickel Flanges Specification and Standards

Specifications Nickel Flanges
ASME B16.5 Nickel Alloy Flange size range 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Nickel Alloy Flanges Standards ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges.
Nickel Alloy Flange Standard ANSI Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Nickel Alloy Flange Standard DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
Nickel Alloy Flange Standard JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
Nickel Alloy Flange Standard UNI 6Bar 10Bar 16Bar 25Bar 40Bar
Nickel Alloy Flange Standard EN 6Bar 10Bar 16Bar 25Bar 40Bar
Main Types Forged / Threaded / Screwed / Plate
Flange supporting material Gasket, Ring Joint, Flange Bolts
Nickel Alloy Pipe Flanges Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Most common types of Nickel Alloy Flanges
  • Weld Neck Ring Flange (WNRF), Nickel Alloy
  • Slip-On Ring Flange (SORF), Nickel Alloy
  • Blind Ring Flange (BLRF), Nickel Alloy
  • Socket Weld Ring Flange (SWRF), Nickel Alloy
  • Threaded Ring Flange, Nickel Alloy
  • Lap Joint Ring Flange (LJRF), Nickel Alloy
  • Ring Type Joint Flange (RTJF), Nickel Alloy
Production technique
  • Forged, Heat treated and machined
Connect Type/ Flange Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

Nickel Alloy Threaded Flange, Socketweld Flange, Slip-On Flange, Blind Flange, Weld Neck Flange

Test Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Equipment Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Origin Indian / West Europe / Japan / USA / Korean
Specialized manufacturer of
  • Rtj Flange
  • Pn16 Flange
  • DIN 2566 pn16
  • DIN 2566 en 1092 1
  • DIN 2566 pn10
  • Nickel Alloy Large Diameter Flange
  • Nickel Alloy Sorf Flange
  • Nickel Alloy Blind Flanges
  • Nickel Alloy Table Flanges
  • Nickel Alloy Weld Neck Flanges
  • Nickel Alloy Threaded Flanges
  • Nickel Alloy Slip-On Flanges
  • Nickel Alloy Socketweld Flanges
  • Nickel Alloy Plate Flanges
  • Nickel Alloy Lap Joint Flanges
  • Nickel Alloy Loose Flanges
  • Nickel Alloy Orifice Flanges
  • Nickel Alloy AS 4087 Water Flanges
Nickel Flanges Standard

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

  • B.S: BS4504 , BS3293, BS1560, BS10
  • AS 2129: Table D; Table E; Table H
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • American standard (ANSI)
  • German (DIN)
  • British standard (BS)
  • Any other specilised flanges
  • DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
  • The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
Key markets and industries for Nickel Alloy Flanges
  • Bitumen upgraders.
  • Heavy oil refineries.
  • Nuclear power (mostly seamless).
  • Petrochemicals and acids.
Export to Ireland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc
Nickel Flanges Application
  • To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Nickel Alloy Pipe Flange Dimensions

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
  • ASME B1.20.1, Pipe Threads, General Purpose
  • ASME B16.1, Cast Iron Flanges and Flanged Fittings Classes 25, 125 and 250
  • ASME B16.5, Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24
  • ASME B16.11, Forged Fittings, Socket Welding and Threaded
  • ASME B16.25, Buttwelding Ends
  • ASME B16.36, Orifice Flanges
  • ASME B16.47, Large Diameter Steel Flanges NPS 26 Through NPS 60
  • ASME B31.1, Power Piping
  • ASME B31.3, Process Piping
  • ASME B46.1, Surface Texture (Surface Roughness, Waviness, and Lay)

Prestige quality Nickel Flanges manufacturers in India offer these Nickel Flanges in DIN, ISO, JIS or ANSI standard.

Nickel Alloy Flanges Weight Chart

15mm (1/2") Nickel Alloy Flange Weight Chart

Standard Class Diameter Bolt Circle Diameter Number of Bolts Bolt Size Diameter of Bolt Hole
AS4087 Flanges PN14 Flanges 95 67 4 M12 14
AS 2129 Flange Table C Flanges 95 67 4 13 14
Table D Flanges 95 67 4 13 14
Table E Flanges 95 67 4 13 14
Table F Flanges 95 67 4 13 14
Table H Flanges 114 83 4 16 17
Table J Flanges 114 83 4 16 17
ANSI B16.5 Flanges ANSI 150 Flanges 89 60 4 13 16
ANSI 300 Flanges 95 67 4 13 16
ANSI 600 Flanges 95 67 4 13 16
ANSI 900 Flanges 121 83 4 19 22
ANSI 1500 Flanges 121 83 4 19 22
ISO 7005 (DIN) Flange PN6 Flanges 80 55 4 M10 11
PN10 Flanges 95 65 4 M12 14
PN16 Flanges 95 65 4 M12 14
PN20 Flanges 90 60.5 4 M14 16
PN25 Flanges 95 65 4 M12 14
PN40 Flanges 95 65 4 M12 14

Regal Sales Corporation is an ISO certified Nickel Flanges manufacturer & distributor in India

Regal Sales Corporation is a manufacturer and supplier of Nickel Flanges offering in all Ratings up to 2500#, built a distribution network with more then 65 countries globally.

ASTM B564 201 Pipe Flanges Nickel Alloy 200 Raised Face Slip On Flanges
ASTM B564 201 Exhaust Flanges ASME SB564 201 Slip On Plate Flanges
ASTM B564 201 Header Flanges 200 Nickel Alloy Slip On Flanges
ASTM B564 201 Plate Flanges B564 201 Pipe Flanges
ASTM B564 201 Backing Flanges Nickel Alloy 200 Exhaust Flanges
ASTM B564 201 Tube Flanges ASME SB564 200 Header Flanges
ASTM B564 201 Stub End Flanges Nickel Alloy 200 Raised Face Weld Neck Flanges
ASTM B564 201 Shower Rod Flanges ASTM B564 201 Sae Flanges
ASTM B564 201 Slip On Flanges 200 Nickel Alloy Weld Neck Flange
ASTM B564 201 Screwed Flanges ASTM B564 201 Clad Flanges
ASTM B564 201 Socket Weld Flanges ASTM B564 201 Nickel Alloy WNRF Flange
ASTM B564 201 Sbc Header Flanges Nickel Alloy 200 Raised Face Blind Flanges
ASTM B564 201 Split Flanges ASME SB564 201 Blind Flanges
ASTM B564 201 Slip-On Pipe Flanges 200 Nickel Alloy Blind Flange
ASTM B564 201 Square Flanges ASTM B564 201 Ansi Flanges
Ansi 150 ASTM B564 201 Flanges ASTM B564 201 Nickel Alloy BLRF Flanges
ASTM B564 201 Blank Flanges Nickel Alloy 200 Orifice Flanges
ASTM B564 201 Bsp Flanges ASME SB564 201 Orifice Flanges
ASTM B564 201 Companion Flanges 200 Nickel Alloy Orifice Flanges
ASTM B564 201 Class 150 Flanges ASTM B564 201 Duct Flanges
ASTM B564 201 Cover Flanges B564 200 Nickel Alloy Orifice Flanges
Custom ASTM B564 201 Flanges Nickel Alloy 200 Socket weld Flanges
Class 600 ASTM B564 201 Flanges ASME SB564 201 Socket weld Flanges
ASTM B564 201 Din Flanges 200 Nickel Alloy Socket weld Flanges
Large Diameter ASTM B564 201 Flanges ASTM B564 201 SWRF Flanges
Table E ASTM B564 201 Flanges ASME B16.5 200 Nickel Alloy Socket weld Flanges
ASTM B564 201 Floor Flanges SS 200 Threaded Flanges
ASTM B564 201 Forged Flanges ASME SB564 201 Threaded Flanges
Gaskets For ASTM B564 201 Flanges 200 Nickel Alloy Threaded Flanges
ASTM B564 201 Handrail Flanges ASTM B564 201 Manifold Flanges
High Pressure ASTM B564 201 Flanges ASTM B564 201 Threaded Flanges
ASTM B564 201 Lap Joint Flanges ASTM B564 Nickel Alloy 200 Threaded Flanges
ASTM B564 201 Long Weld Neck Flanges Nickel Alloy 200 Long weld Neck Flanges
ASTM B564 201 Metric Flanges ASME SB564 201 Long weld Neck Flanges
ASTM B564 201 Muffler Flanges 200 Nickel Alloy Long weld Neck Flanges
ASTM B564 201 Pump Flanges ASTM B564 201 Orifice Flanges
ASTM B564 201 Pressed Flanges Nickel Alloy 200 Ring Type Joint Flanges
ASTM B564 201 Puddle Flanges ASME SB564 201 Ring Type Joint Flange
ASTM B564 201 Pad Flanges 200 Nickel Alloy RTJ Flanges
ASTM B564 201 Reducing Flanges Nickel Alloy RTJ Flanges
ASTM B564 201 Raised Face Flanges ASTM B564 201 RTJ Flanges
ASTM B564 201 Ring Flanges BS4504 Nickel Alloy 200 RTJ Flanges
ASTM B564 201 Threaded Reducing Flanges Nickel Alloy 200 Reducing Flanges
ASTM B564 201 Wnrf Flanges ASME SB564 201 Reducing Flanges
ASTM B564 201 Split Flanges 200 Nickel Alloy Reducing Flange
ASTM B564 201 Turbo Flanges ASTM B564 201 Forged Flanges
ASTM B564 201 Vacuum Flanges ASTM B564 201 Reducing Flange
ASTM B564 Nickel Alloy 200 Reducing Flanges 200 Nickel Alloy Forged Flange

Manufacturing Nickel Flanges in India, Regal Sales Corporation holds a wide range of Nickel Flanges in stock for immediate despatch throughout India & globally.

Special offer on:

Flange Schedule/Class Pipe Size - Pipe Flanges Flange Connection Type Flange Material Max. Pressure
ASME B16.5 Class 150 1/2" FNPT Nickel Alloy 150 psi
ASME B16.5 Class 150 1/2" Socket Weld Forged Nickel Alloy 275 psi
ASME B16.5 Class 150 1/2" Welded Nickel Alloy 150 psi
ASME B16.5 Class 150 3/4" FNPT Nickel Alloy 150 psi
ASME B16.5 Class 150 3/4" Socket Weld Forged Nickel Alloy 275 psi
ASME B16.5 Class 150 1-1/4" Socket Weld Forged Nickel Alloy 275 psi
ASME B16.5 Class 150 1-1/2" Socket Weld Forged Nickel Alloy 275 psi
ASME B16.5 Class 150 2" FNPT Nickel Alloy 150 psi
ASME B16.5 Class 150 2" Socket Weld Forged Nickel Alloy 275 psi
ASME B16.5 Class 150 2-1/2" Socket Weld Forged Nickel Alloy 275 psi
ASME B16.5 Class 150 3" Socket Weld Forged Nickel Alloy 275 psi
ASME B16.5 Class 150 4" FNPT Nickel Alloy 150 psi
ASME B16.5 Class 150 4" Socket Weld Forged Nickel Alloy 275 psi
ASME B16.5 Class 300 1/2" Slip On Forged Nickel Alloy 720 psi
ASME B16.5 Class 300 1/2" Slip On Forged Nickel Alloy 720 psi
ASME B16.5 Class 300 1" Slip On Forged Nickel Alloy 720 psi
ASME B16.5 Class 300 1" Slip On Forged Nickel Alloy 720 psi
ASME B16.5 Class 300 1-1/4" FNPT Forged Nickel Alloy 720 psi
ASME B16.5 Class 300 1-1/4" Slip On Forged Nickel Alloy 720 psi
ASME B16.5 Class 300 1-1/2" Slip On Forged Nickel Alloy 720 psi
ASME B16.5 Class 300 1-1/2" Slip On Forged Nickel Alloy 720 psi
ASME B16.5 Class 300 2" Slip On Forged Nickel Alloy 720 psi
ASME B16.5 Class 300 2" Slip On Forged Nickel Alloy 720 psi
ASME B16.5 Class 300 2-1/2" Slip On Forged Nickel Alloy 720 psi
ASME B16.5 Class 300 2-1/2" Slip On Forged Nickel Alloy 720 psi
ASME B16.5 Class 300 3" Slip On Forged Nickel Alloy 720 psi
ASME B16.5 Class 300 3" Slip On Forged Nickel Alloy 720 psi
ASME B16.5 Class 300 4" Slip On Forged Nickel Alloy 720 psi
ASME B16.5 Class 300 4" Slip On Forged Nickel Alloy 720 psi

Nickel Alloy Forged and Plate Flange

Nickel Alloy 200 Flange
ASTM B564 Nickel Alloy 200 Slip-On Flange ASTM B564 Nickel Alloy 200 Threaded Flange
ASTM B564 Nickel Alloy 200 Weld Neck Flange ASTM B564 Nickel Alloy 200 Socket Weld Flange
ASTM B564 Nickel Alloy 200 Blind Flange ASTM B564 Nickel Alloy 200 Reducing Flange
ASTM B564 Nickel Alloy 200 Lap Joint Flange ASTM B564 Nickel Alloy 200 Plate Flange
ASTM B564 Nickel Alloy 200 Orifice Flange ASTM B564 Nickel Alloy 200 Forged Flange
ASTM B564 Nickel Alloy 200 Ring Type Joint Flange ASTM B564 Nickel Alloy 200 Square Flange

Nickel Alloy Pipe Flange Pressure Ratings

Nickel Flanges Flange Standards / Types and Pressure Class :

ASME/ANSI B 16.36 Welding Neck Flange, Slip on Flange, Threaded Flange
PRESSURE CLASS 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.5 Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47 Welding Neck Flange, Blind Flange [Series A & B]
PRESSURE CLASS 75, 150, 300, 400, 600, 900
BS 4504 SEC 3.1 Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 40
BS 4504[PART 1] Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 400
BS 1560 BOSS Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
BS10 Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE D, E, F, H
DIN FLANGES DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS PN 6 TO PN 100

Nickel Flanges Chemical Composition

Grade C Mn Si S Cu Fe Ni
Nickel 200 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min
Nickel 201 0.02 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel Flanges mechanical properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 200 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %
Nickel 201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for Nickel Flanges

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2
Nickel 201 2.4068 N02201 NW 2201 NA 12 НП-2 LC-Ni 99

Nickel Flanges useful information

Click on below links for Nickel Alloy 200 flanges dimensions

Find a Nickel Flanges distributor in your location:

Regal Sales Corporation is a Govt. approved certified Nickel Flanges exporter in India. All of our Nickel Flanges are manufactured and tested to international standards, and specifications as per DIN, JIS, EN, ASTM etc. Regal Sales Corporation is known as a trusted vendor as a Nickel Flanges distributor & dealer in your country. We have huge stock in Asia, GCC, Gulf, Middle east, UK to supply with over 28 countries, we provide after sales service and fast delivery.

MIDDLE EAST

  • Saudi Arabia (KSA)
  • UAE
  • Iran
  • Iraq
  • Jordan
  • Qatar
  • Bahrain
  • Oman
  • Kuwait
  • Turkey
  • Yemen
  • Syria
  • Cyprus

AFRICA

  • South Africa
  • Nigeria
  • Algeria
  • Angola
  • Libya
  • Egypt
  • Gabon
  • Sudan
  • Equatorial Guinea
  • The Republic Of Congo
NORTH AMERICA
  • USA
  • Canada
  • Mexico
  • Panama
  • Costa Rica
  • Puerto Rica
  • Trinidad And Tobago
  • Jamaica
  • Bahamas
  • Denmark

EUROPE

  • UK
  • Netherland
  • Russia
  • Norway
  • Germany
  • France
  • Italy
  • Spain
  • Ukraine
  • Belgium
  • Greece
  • Hungary
  • Albania
  • Austria
  • Finland
  • Ireland
  • Croatia
  • Slovenia
  • Malta
  • Switzerland
  • Slovakia
  • Czech Republic
  • Portugal

ASIA

  • Malaysia
  • India
  • Taiwan
  • Cambodia
  • Singapore
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Sri Lanka
  • Maldives
  • Bangladesh
  • Mayanmar
SOUTH AMERICA
  • Venezuela
  • Argentina
  • Bolivia
  • Colombia
  • Ecuador
  • Guyana
  • Paraguay
  • Uruguay
  • Brazil
  • Chile
Stock an extensive range of Nickel Flanges, Nickel Flanges suppliers in Mumbai, India
Manufacting high-class Nickel Flanges in India, offer lowest price of Nickel Flanges, contact Nickel Flanges manufacturers in Mumbai, Pune & Chennai - India