Nickel 200 fasteners
Biggest Manufacturer of Ni 200 Hex Bolt in India with Size Ranging from M02 to M30
Nickel Alloy 200 Fasteners consists of a commercially pure nickel that does contain more than 99% nickel in its composition. Another thing is that the material contains carbon, manganese, silicon, sulfur, copper and iron as well. Bolts, nuts, washers, studs as well as threaded rods can be found in this range of fasteners. Regarding to the type of hex bolts the Nickel 200 Hex Bolt is one those most used in the market. The hex head design enables fixing of the bolt on without asserting shear forces on the head and the threads.
The material has very high melting point of 1446 degrees Celsius. Therefore the DIN 2.4068 Nickel Screws and other fasteners can be used in heat exchangers, boilers, nuclear power plants and in super heater elements. They could also be used at cryogenic applications. The UNS N02200 Hex Bolts And Nuts come under different international standards. The sizes range from M3 to M56 and the length of the fasteners range from 3mm to 200mm. The DIN 2.4066 Studs can range from M02 to M33 in length. The different fasteners can have different dimension ranges.
Nickel 200 Fasteners Manufacturer in India offers washer sizes range from M1 to M64 or from #4 to 3 inches where all other fasteners range only up to 2 inches. The ASTM B160 Alloy 200 Threaded Rod and all fasteners are used in marine, sea water, ship building and in brackish water applications for their high chloride ion corrosion stress crack resistance. The Nickel 201 Hex Bolts are also used at high pressure, high temperature and highly corrosive applications such as chemical processing, food processing, acid processing and in petrochemical applications.
Nickel 200 Hex Bolt
Nickel 200 Fasteners
DIN 2.4068 Nickel Screws
Table of Content
- Specifications of Nickel 200 Fasteners
- Types of Nickel 200 Fasteners
- 200 Nickel Hex Bolt Size Chart
- Nickel 200 Hex Bolt Stress Areas and Threads Chart
- Nickel 201 Hex Bolts dimension Chart
- Nickel Alloy Ni-200 Bolts And Nuts Mechanical Properties
- Nickel 200 Alloy Hex Flange Bolt Physical Properties
- Equivalent Material of Ni 200 Hex Nuts
- Nickel 200 J Bolts Chemical Compositions
- Ni Alloy 200 Stud Bolt Torque Chart
- What Coatings or Finishes Are Applied to Nickel 200 Fasteners?
- What is the Electrical Conductivity of Nickel 200?
Get Nickel 200 Bolts & Nickel Alloy 200 Industrial Fasteners Available with Correct Dimensions, Check Specifications
Nickel 200 Fasteners Sizes
- Nuts : 3/6"- 2", M3 - M56
- Washers : 4"- 3", M3 - M64
- Screw : 3/6"- 2", M3 - M56
- Machine Screws : M1.6 - M12
Length
- Length: 3 mm - 1000 mm
- Thickness: 1 - 300 mm
Benefits
- Offers great Weldability
- Corrosion Resistant
- Versatile Nature
- Higher strength
Applications
- Medical, Mining
- Pharmaceuticals
- Aerospace
- Food Industry
Finishing
- zinc-nickel
- Anodizing, nickel plated
- Zinc , black oxide, BZP
- Geometry, Dacroment, Hot Dip Galvanised (HDG)
Testing Methods
- Tensile Testing
- Hardness Testing
- Impact Testing
- Corrosion Testing
Surface Coating
- Teflon, Xylan, Zinc
- Cadmium, Galvanized
- Black Oxide
- Others Upon Request
Head Drive
- Six-Lobe
- Slotted
- Phillips/ Slot
- Phillips
Threads type
- METRIC
- UNF, BSW
- BSF
- UNC, or as required
Packaging Methods
- Carton
- Pallet
- Corrugated Box
- Small Pack
Production process
- Hot Forging
- Machining and CNC
- Cold Forging
- Customized
Certification
- 100% Radiography Test Report
- MTC as per EN 10204 / 3.1B
- Raw Materials Certificate
Ni 200 Hex Bolts
Nickel 200 Threaded Rod
Pure Nickel 200 Stud Bolt
Pure 200 Nickel Nuts
Nickel Alloy 200 Washer
Ni 200 Material Screws
Nickel Alloy Ni-200 Socket Head Cap Screw
Ni 200 Alloy Self Tapping Screw
Ni Alloy 200 Fasteners
Ni 200 Material Bolts
Alloy 200 Bolts Hex Nuts
Alloy 200 Nickel Heavy Hex Bolts
200 Nickel Alloy Studs
200 Nickel Foundation Bolts
Nickel Alloy UNS No 2200 Lag Bolts
N02200 Alloy U Bolts
Nickel Alloy Ni-200 Machine Bolts
Nickel 200 Carriage Bolts
Pure Nickel 200 Eye Bolts
UNS N02200 Hanger Bolts
Ni Alloy 200 J Bolts
Nickel 200 Alloy Hex Flange Bolts
Nickel 2200 Elevator Bolts
Alloy 200 Shoulder Bolts
| Screws Type | Socket Head | Countersunk | Button Head | Flange Button | Socket Low | Knurled Point | Flat Point | Dog Point | Cone Point | Plain Point | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap Screws | Shoulder Screws | Socket Head Screws | Socket Screws | Head Socket Screws | Head Cap Screws | Socket Set Screws | |||||
| GRADE | 12.9 | 10.9 | 45H | ||||||||
| SIZE | M1.6 to M64 | M6 to M24 | M3 to M20 | M3 to M12 | M3 to M10 | M4 to M20 | M3 to M20 | M6 to M12 | M3 to M20 | M3 to M12 | M3 to M20 |
| ASTM | A574M | – | F835M | – | F912M | ||||||
| ASME | B18.3.1 M | – | – | B18.3.6M | |||||||
| ISO | 4762 | – | 10642 | 7380 | – | – | 4029 | 4026 | 4028 | 4027 | 4029 |
ASTM F2281 Nickel Alloy Bolts & High-Quality Nickel 200 Fasteners Corrosion Resistance is Very High, Check Properties
| Nominal Size inch. | Fine Threads – UNF | Coarse Threads – UNC | ||
|---|---|---|---|---|
| Stress AreaA, in2 | Threads inch | Stress AreaA, in2 | Threads inch | |
| 1 1/4 | 1.0730 | 12 | 0.9690 | 7 |
| 7/8 | 0.5090 | 14 | 0.4620 | 9 |
| 5/16 | 0.0580 | 24 | 0.0524 | 18 |
| 1/4 | 0.0364 | 28 | 0.0318 | 20 |
| 7/16 | 0.1187 | 20 | 0.1063 | 14 |
| 1 | 0.6630 | 12 | 0.6060 | 8 |
| 9/16 | 0.2030 | 18 | 0.1820 | 12 |
| 1/2 | 0.1599 | 20 | 0.1419 | 13 |
| 1 3/8 | 1.3150 | 12 | 1.1550 | 6 |
| 3/18 | 0.0878 | 24 | 0.0775 | 16 |
| 3/4 | 0.3730 | 16 | 0.3340 | 10 |
| 1 1/8 | 0.8560 | 12 | 0.7630 | 7 |
| 5/8 | 0.2560 | 18 | 0.2260 | 11 |
| 1 1/2 | 1.5810 | 12 | 1.4050 | 6 |
| NOMINAL SIZE (D) | BODY DIA | HEAD THICK | ASTM A193 THE FLATS | ASTM A193 CORNERS | ||||
|---|---|---|---|---|---|---|---|---|
| D (MIN) | D (MAX) | H (MIN) | H (MAX) | F (MIN) | F (MAX) | C (MIN) | C (MAX) | |
| m10 | 9.78 | 10.00 | 6.17 | 6.63 | 15.73 | 17.00 | 17.77 | 18.48 |
| m24 | 23.67 | 24.00 | 14.56 | 15.44 | 35.00 | 36.00 | 39.55 | 41.57 |
| m14 | 13.73 | 14.00 | 8.51 | 9.09 | 20.67 | 22.00 | 23.35 | 24.25 |
| m20 | 19.67 | 20.00 | 12.12 | 12.88 | 29.16 | 30.00 | 32.95 | 34.64 |
| m56 | 55.26 | 56.00 | 33.80 | 36.2 | 82.20 | 85.00 | 93.71 | 98.15 |
| m36 | 35.61 | 36.00 | 21.63 | 23.38 | 53.80 | 55.00 | 60.79 | 63.51 |
| m42 | 41.38 | 42.00 | 25.03 | 26.97 | 62.90 | 65.00 | 71.71 | 75.06 |
| m64 | 63.26 | 64.00 | 38.68 | 41.32 | 91.80 | 95.00 | 104.65 | 109.70 |
| m80 | 79.26 | 80.00 | 48.42 | 51.58 | 111.00 | 115.00 | 126.54 | 132.72 |
| m100 | 99.13 | 90.00 | 60.10 | 63.9 | 140.00 | 145.00 | 159.60 | 167.43 |
Get UNS N02200 Hex Bolts & Nickel 200 Hex Bolt with Hot Dipped Galvanizing & Zinc Coated, Check Mechanical Properties
Yield Strength
Psi – 21500, MPa –168
Tensile Strength
Psi – 67000, MPa – 462
Melting Point
2635 °F
Elongation
45 %
| Property | Value |
|---|---|
| Density | 8.89 g/cm³ |
| Thermal Conductivity | 90 W/m·K |
| Specific Heat | 0.44 J/g·K |
| Poisson's Ratio | 0.31 |
| Young’s Modulus | 200 GPa |
| Hardness(Brinell) | 60 - 100 HB |
| Grade | ASTM | ASME | UNS | WNR | GOST | AFNOR | JIS | BS | EN | DIN |
|---|---|---|---|---|---|---|---|---|---|---|
| America | Australia | North America | Russia | Russia | France | Japan | United Kingdom | Europe | Germany | |
| Nickel 201 | ASTM F2281 | ASME SF 2281 | N02201 | 2.4068 | НП-2 | – | NW 2201 | NA 12 | LC-Ni 99 | 2.4068 |
| Nickel 200 | ASTM F2281 | ASME SF 2281 | N02200 | 2.4066 | НП-2 | N-100M | NW 2200 | NA 11 | Ni 99.2 | 2.4066 |
View DIN 2.4066 Studs & Nickel 200 Stud Bolts with various Chemical Grade, Check Composition
Nickel 200 Fasteners Manufacturer in India offers a Excellent torque chart for fasteners
| Bolt Diameter | Nut Size | Nickel Lube | Copper Lube | Machine Oil | Dry | Moly Lube |
|---|---|---|---|---|---|---|
| Inch | u=0.110 | u=0.100 | u=0.160 | u=0.400 | u=0.085 | |
| 1 | 1-5/8 | 567 | 522 | 746 | 1864 | 343 |
| 3/4 | 1-1/4 | 239 | 219 | 313 | 782 | 145 |
| 7/8 | 1-7/16 | 380 | 350 | 501 | 1250 | 231 |
| 1-1/4 | 2 | 1135 | 1044 | 1505 | 3808 | 676 |
| 1-5/8 | 2-9/16 | 2567 | 2354 | 3423 | 8764 | 1499 |
| 1-3/8 | 2-3/16 | 1526 | 1400 | 2025 | 5149 | 901 |
| 1-1/2 | 2-3/8 | 1995 | 1829 | 2654 | 6491 | 1171 |
| 1-7/8 | 2-15/16 | 3977 | 3642 | 5317 | 13685 | 2304 |
| 1-1/8 | 1-13/16 | 819 | 753 | 1080 | 2721 | 491 |
| 2 | 3-1/8 | 4844 | 4433 | 6482 | 16718 | 2795 |
| 2-1/8 | N/A | 5826 | 5332 | 7805 | 20171 | 3353 |
| 2-1/4 | 3-1/2 | 6934 | 6343 | 9297 | 24067 | 3980 |
| 2-3/4 | 4-1/4 | 11541 | 10546 | 15519 | 40384 | 6567 |
| 2-3/8 | N/A | 8173 | 7474 | 10367 | 28434 | 4680 |
| 2-1/2 | 3-7/8 | 9552 | 8733 | 12862 | 33275 | 5457 |
| 3 | 4-5/8 | 15024 | 13724 | 20225 | 52738 | 9781 |
Nickel 200 fasteners Supplier in India offers a diverse range of coatings for fasteners. We have a strong sales network provided in UAE, South Africa, Belgium, Germany, Netherlands, Egypt, Jordan, and Lebanon.
| Feature | Precipitation-Hardened Nickel Alloy Fasteners | Solution-Annealed Nickel Alloy Fasteners |
|---|---|---|
| Strength | High strength and hardness | Lower strength |
| Ductility | Lower ductility | Good ductility and toughness |
| Corrosion Resistance | Good | Excellent |
| Uses | High-strength applications | Toughness and formability |
- ➤Conductivity: 25-28% IACS.
- ➤Resistivity: 5.9–6.2 µΩ·cm.
- ➤Comparison: Moderate vs. pure copper (100% IACS).
- ➤Applications: Batteries, connectors, electroplating.