SMO 254 Flanges Manufacturer

Materials

SMO 254 Pipe Flanges Manufacturer.

SMO 254 Blind Flanges Suppliers, SMO 254 Flanges Exporter in Mumbai.

SMO 254 Flanges Manufacturer

Regal Sales Corporation is one of the recommended manufacturer Of SMO 254 Flanges in India. Our SMO 254 Collar Flanges contain larger amounts of chromium in comparison with other steels and thus have good corrosion resistance. Type SMO 254 Lap Joint Flanges contain about 10% of chromium. Type SMO 254 Blind Flanges (BLRF) are thermally stable and possess moderate strength even when the temperature is high. SMO 254 Plate Flanges whose design enables combining improved resistance to pitting, high strength, stress corrosion, crevice corrosion and cracking. SMO 254 Slip On Flange resists sulfide stress corrosion and chloride environments. SMO 254 Flat Face Flange is important part of duplex steel flange family.

SMO 254 Spectacle Blind Flange & SMO 254 Threaded Flange is hot worked in the temperature range of 954-1149°C (1750-2100°F). SMO 254 Weld Neck Flange(WNRF) forging difficult to form due to its high strength and work hardening rate.

Our SMO 254 RF Flange have great resistance to sea water-related corrosion due to the presence of significant amounts of stainless steel iron. Supplier of SMO 254 Raised Face Flanges. The benefits of our SMO 254 FF Flanges include a long service life that will retain an attractive, clean finish with low maintenance cost.

SMO 254 Flange Pressure Ratings, SMO 254 Flange Dimensions

SMO 254 Flanges manufacturers in India

Regal Sales Corporation is manufacturer of SMO 254 Flanges, forged, ASTM A182 (dual marked and certified), ASME B16.5, annealed and fully machined, raised face, smooth finish (125-250 RMS / 3.2-6.3µM) to MSS-SP6, SS Flange hardness as per NACE MR0175 and tested to ASTM A262 E and PMI.

254 SMO™ Welding Neck Flange


254 SMO™ Welding Neck Flange

A182 Spade Flange


A182 Spade Flange

ASTM A182 Plate Flange


ASTM A182 Plate Flange

254 SMO™ Slip On Flange


254 SMO™ Slip On Flange

254 SMO™ Blind Flange


254 SMO™ Blind Flange

ASTM A182 Long WN Flange


ASTM A182 Long WN Flange

Steel A182 Threaded Flange


Steel A182 Threaded Flange

254 SMO™ Socket Weld Flange


254 SMO™ Socket Weld Flange

ASTM A182 Grade Orifice Flange


ASTM A182 Grade 254 Orifice Flange

ASTM A182 Gr Spacer Flange


ASTM A182 Gr 254 Spacer Flange

SA 182 Blank Flange


SA 182 Blank Flange

254 SMO™ High Hub Blind Flange


254 SMO™ High Hub Blind Flange

AISI Forged Flange


AISI Forged Flange

SMO 254 Bleed Rings


SMO 254 Bleed Rings

SMO 254 Nipolet Flange


SMO 254 Nipolet Flange

SMO 254 Reducing Flange


SMO 254 Reducing Flange

254 SMO™ Lap Joint Flange


254 SMO™ Lap Joint Flange

ASTM A182 Tongue & Groove Flange


ASTM A182 Tongue & Groove Flange

ASTM A182 Girth Flange


ASTM A182 Girth Flange

ASTM A182 Spectacle Blind Flange


ASTM A182 Spectacle Blind Flange

ASTM A182 Anchor Flange


ASTM A182 Anchor Flange

ASTM A182 Square Flange


ASTM A182 Square Flange

ASTM A182 Screw Flange


ASTM A182 Screw Flange

ASTM A182 Ring Joint Flange


ASTM A182 Ring Joint Flange

ASTM A182 Raised Face Flange


ASTM A182 Raised Face Flange

ASTM A182 Male & Female Flange


ASTM A182 Male & Female Flange

SMO 254 Exhuast Flange


SMO 254 Exhuast Flange

SMO 254 Flanges Specification and Standards

Specifications SMO 254 Flanges
ASME B16.5 SMO 254 Flange size range 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
SMO 254 Flanges Standards ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges.
SMO 254 Flange Standard ANSI Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
SMO 254 Flange Standard DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
SMO 254 Flange Standard JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
SMO 254 Flange Standard UNI 6Bar 10Bar 16Bar 25Bar 40Bar
SMO 254 Flange Standard EN 6Bar 10Bar 16Bar 25Bar 40Bar
Main Types Forged / Threaded / Screwed / Plate
Flange supporting material Gasket, Ring Joint, Flange Bolts
SMO 254 Pipe Flanges Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Most common types of SMO 254 Flanges
  • Weld Neck Ring Flange (WNRF), SMO 254
  • Slip-On Ring Flange (SORF), SMO 254
  • Blind Ring Flange (BLRF), SMO 254
  • Socket Weld Ring Flange (SWRF), SMO 254
  • Threaded Ring Flange, SMO 254
  • Lap Joint Ring Flange (LJRF), SMO 254
  • Ring Type Joint Flange (RTJF), SMO 254
Production technique
  • Forged, Heat treated and machined
Connect Type/ Flange Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

SMO 254 Threaded Flange, Socketweld Flange, Slip-On Flange, Blind Flange, Weld Neck Flange
Test Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Equipment Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Origin Indian / West Europe / Japan / USA / Korean
Specialized manufacturer of
  • Rtj Flange
  • Pn16 Flange
  • DIN 2566 pn16
  • DIN 2566 en 1092 1
  • DIN 2566 pn10
  • SMO 254 Large Diameter Flange
  • SMO 254 Sorf Flange
  • SMO 254 Blind Flanges
  • SMO 254 Table Flanges
  • SMO 254 Weld Neck Flanges
  • SMO 254 Threaded Flanges
  • SMO 254 Slip-On Flanges
  • SMO 254 Socketweld Flanges
  • SMO 254 Plate Flanges
  • SMO 254 Lap Joint Flanges
  • SMO 254 Loose Flanges
  • SMO 254 Orifice Flanges
  • SMO 254 AS 4087 Water Flanges
SMO 254 Flanges Standard

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

  • B.S: BS4504 , BS3293, BS1560, BS10
  • AS 2129: Table D; Table E; Table H
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • American standard (ANSI)
  • German (DIN)
  • British standard (BS)
  • Any other specilised flanges
  • DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
  • The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
Key markets and industries for SMO 254 Flanges
  • Bitumen upgraders.
  • Heavy oil refineries.
  • Nuclear power (mostly seamless).
  • Petrochemicals and acids.
Export to Ireland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc
SMO 254 Flanges Application
  • To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

SMO 254 Pipe Flange Dimensions

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
  • ASME B1.20.1, Pipe Threads, General Purpose
  • ASME B16.1, Cast Iron Flanges and Flanged Fittings Classes 25, 125 and 250
  • ASME B16.5, Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24
  • ASME B16.11, Forged Fittings, Socket Welding and Threaded
  • ASME B16.25, Buttwelding Ends
  • ASME B16.36, Orifice Flanges
  • ASME B16.47, Large Diameter Steel Flanges NPS 26 Through NPS 60
  • ASME B31.1, Power Piping
  • ASME B31.3, Process Piping
  • ASME B46.1, Surface Texture (Surface Roughness, Waviness, and Lay)

Prestige quality SMO 254 Flanges manufacturers in India offer these SMO 254 Flanges in DIN, ISO, JIS or ANSI standard.

254 SMO™ Flanges Weight Chart

15mm (1/2") SMO 254 Flange Weight Chart

Standard Class Diameter Bolt Circle Diameter Number of Bolts Bolt Size Diameter of Bolt Hole
AS4087 Flanges PN14 Flanges 95 67 4 M12 14
AS 2129 Flange Table C Flanges 95 67 4 13 14
Table D Flanges 95 67 4 13 14
Table E Flanges 95 67 4 13 14
Table F Flanges 95 67 4 13 14
Table H Flanges 114 83 4 16 17
Table J Flanges 114 83 4 16 17
ANSI B16.5 Flanges ANSI 150 Flanges 89 60 4 13 16
ANSI 300 Flanges 95 67 4 13 16
ANSI 600 Flanges 95 67 4 13 16
ANSI 900 Flanges 121 83 4 19 22
ANSI 1500 Flanges 121 83 4 19 22
ISO 7005 (DIN) Flange PN6 Flanges 80 55 4 M10 11
PN10 Flanges 95 65 4 M12 14
PN16 Flanges 95 65 4 M12 14
PN20 Flanges 90 60.5 4 M14 16
PN25 Flanges 95 65 4 M12 14
PN40 Flanges 95 65 4 M12 14

Regal Sales Corporation is an ISO certified SMO 254 Flanges manufacturer & distributor in India

Regal Sales Corporation is a manufacturer and supplier of SMO 254 Flanges offering in all Ratings up to 2500#, built a distribution network with more then 65 countries globally.

ASTM A182 Pipe Flanges 254 SMO™ Raised Face Slip On Flanges
ASTM A182 Exhaust Flanges ASME SA182 Slip On Plate Flanges
ASTM A182 Header Flanges SMO 254 Slip On Flanges
ASTM A182 Plate Flanges A182 Pipe Flanges
ASTM A182 Backing Flanges 254 SMO™ Exhaust Flanges
ASTM A182 Tube Flanges ASME SA182 Header Flanges
ASTM A182 Stub End Flanges 254 SMO™ Raised Face Weld Neck Flanges
ASTM A182 Shower Rod Flanges ASTM A182 Sae Flanges
ASTM A182 Slip On Flanges SMO 254 Weld Neck Flange
ASTM A182 Screwed Flanges ASTM A182 Clad Flanges
ASTM A182 Socket Weld Flanges ASTM A182 SMO 254 WNRF Flange
ASTM A182 Sbc Header Flanges 254 SMO™ Raised Face Blind Flanges
ASTM A182 Split Flanges ASME SA182 Blind Flanges
ASTM A182 Slip-On Pipe Flanges SMO 254 Blind Flange
ASTM A182 Square Flanges ASTM A182 Ansi Flanges
Ansi 150 ASTM A182 Flanges ASTM A182 SMO 254 BLRF Flanges
ASTM A182 Blank Flanges 254 SMO™ Orifice Flanges
ASTM A182 Bsp Flanges ASME SA182 Orifice Flanges
ASTM A182 Companion Flanges SMO 254 Orifice Flanges
ASTM A182 Class 150 Flanges ASTM A182 Duct Flanges
ASTM A182 Cover Flanges A182 SMO 254 Orifice Flanges
Custom ASTM A182 Flanges 254 SMO™ Socket weld Flanges
Class 600 ASTM A182 Flanges ASME SA182 Socket weld Flanges
ASTM A182 Din Flanges SMO 254 Socket weld Flanges
Large Diameter ASTM A182 Flanges ASTM A182 SWRF Flanges
Table E ASTM A182 Flanges ASME B16.5 SMO 254 Socket weld Flanges
ASTM A182 Floor Flanges SS Threaded Flanges
ASTM A182 Forged Flanges ASME SA182 Threaded Flanges
Gaskets For ASTM A182 Flanges SMO 254 Threaded Flanges
ASTM A182 Handrail Flanges ASTM A182 Manifold Flanges
High Pressure ASTM A182 Flanges ASTM A182 Threaded Flanges
ASTM A182 Lap Joint Flanges ASTM A182 SMO 254 Threaded Flanges
ASTM A182 Long Weld Neck Flanges 254 SMO™ Long weld Neck Flanges
ASTM A182 Metric Flanges ASME SA182 Long weld Neck Flanges
ASTM A182 Muffler Flanges SMO 254 Long weld Neck Flanges
ASTM A182 Pump Flanges ASTM A182 Orifice Flanges
ASTM A182 Pressed Flanges 254 SMO™ GRAAAAD Ring Type Joint Flanges
ASTM A182 Puddle Flanges ASME SA182 FGRAAAAD Ring Type Joint Flange
ASTM A182 Pad Flanges SMO 254 RTJ Flanges
ASTM A182 Reducing Flanges 254 SMO™ RTJ Flanges
ASTM A182 Raised Face Flanges ASTM A182 RTJ Flanges
ASTM A182 Ring Flanges BS4504 SMO 254 RTJ Flanges
ASTM A182 Threaded Reducing Flanges 254 SMO™ Reducing Flanges
ASTM A182 Wnrf Flanges ASME SA182 Reducing Flanges
ASTM A182 Split Flanges SMO 254 Reducing Flange
ASTM A182 Turbo Flanges ASTM A182 Forged Flanges
ASTM A182 Vacuum Flanges ASTM A182 Reducing Flange
ASTM A182 SMO 254 Reducing Flanges SMO 254 Forged Flange

Manufacturing SMO 254 Flanges in India, Regal Sales Corporation holds a wide range of SMO 254 Flanges in stock for immediate despatch throughout India & globally.

Special offer on:

Flange Schedule/Class Pipe Size - Pipe Flanges Flange Connection Type Flange Material Max. Pressure
ASME B16.5 Class 150 1/2" FNPT SMO 254 150 psi
ASME B16.5 Class 150 1/2" Socket Weld Forged SMO 254 275 psi
ASME B16.5 Class 150 1/2" Welded SMO 254 150 psi
ASME B16.5 Class 150 3/4" FNPT SMO 254 150 psi
ASME B16.5 Class 150 3/4" Socket Weld Forged SMO 254 275 psi
ASME B16.5 Class 150 1-1/4" Socket Weld Forged SMO 254 275 psi
ASME B16.5 Class 150 1-1/2" Socket Weld Forged SMO 254 275 psi
ASME B16.5 Class 150 2" FNPT SMO 254 150 psi
ASME B16.5 Class 150 2" Socket Weld Forged SMO 254 275 psi
ASME B16.5 Class 150 2-1/2" Socket Weld Forged SMO 254 275 psi
ASME B16.5 Class 150 3" Socket Weld Forged SMO 254 275 psi
ASME B16.5 Class 150 4" FNPT SMO 254 150 psi
ASME B16.5 Class 150 4" Socket Weld Forged SMO 254 275 psi
ASME B16.5 Class 300 1/2" Slip On Forged SMO 254 720 psi
ASME B16.5 Class 300 1/2" Slip On Forged SMO 254 720 psi
ASME B16.5 Class 300 1" Slip On Forged SMO 254 720 psi
ASME B16.5 Class 300 1" Slip On Forged SMO 254 720 psi
ASME B16.5 Class 300 1-1/4" FNPT Forged SMO 254 720 psi
ASME B16.5 Class 300 1-1/4" Slip On Forged SMO 254 720 psi
ASME B16.5 Class 300 1-1/2" Slip On Forged SMO 254 720 psi
ASME B16.5 Class 300 1-1/2" Slip On Forged SMO 254 720 psi
ASME B16.5 Class 300 2" Slip On Forged SMO 254 720 psi
ASME B16.5 Class 300 2" Slip On Forged SMO 254 720 psi
ASME B16.5 Class 300 2-1/2" Slip On Forged SMO 254 720 psi
ASME B16.5 Class 300 2-1/2" Slip On Forged SMO 254 720 psi
ASME B16.5 Class 300 3" Slip On Forged SMO 254 720 psi
ASME B16.5 Class 300 3" Slip On Forged SMO 254 720 psi
ASME B16.5 Class 300 4" Slip On Forged SMO 254 720 psi
ASME B16.5 Class 300 4" Slip On Forged SMO 254 720 psi

254 SMO™ Forged and Plate Flange

254 SMO™ Flange
ASTM A182 254 SMO™ Slip-On Flange ASTM A182 254 SMO™ Threaded Flange
ASTM A182 254 SMO™ Weld Neck Flange ASTM A182 254 SMO™ Socket Weld Flange
ASTM A182 254 SMO™ Blind Flange ASTM A182 254 SMO™ Reducing Flange
ASTM A182 254 SMO™ Lap Joint Flange ASTM A182 254 SMO™ Plate Flange
ASTM A182 254 SMO™ Orifice Flange ASTM A182 254 SMO™ Forged Flange
ASTM A182 254 SMO™ Ring Type Joint Flange ASTM A182 254 SMO™ Square Flange

SMO 254 Pipe Flange Pressure Ratings

SMO 254 Flanges Flange Standards / Types and Pressure Class :

ASME/ANSI B 16.36 Welding Neck Flange, Slip on Flange, Threaded Flange
PRESSURE CLASS 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.5 Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47 Welding Neck Flange, Blind Flange [Series A & B]
PRESSURE CLASS 75, 150, 300, 400, 600, 900
BS 4504 SEC 3.1 Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 40
BS 4504[PART 1] Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 400
BS 1560 BOSS Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
BS10 Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE D, E, F, H
DIN FLANGES DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS PN 6 TO PN 100

SMO 254 Flanges Chemical Composition

Grade C Mn Si Cu S P Mo Ni Cr
SMO 254 0.02 1  0.08 0.5-1.0 0.01  0.03 6.0-6.5  17.5-18.5 19.5-20.5

SMO 254 Flanges mechanical properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8 g/cm3 1320-1390 ℃ 650 300 35 %

Equivalent Grades for SMO 254 Flanges

STANDARD WERKSTOFF NR. UNS SIS BS GOST AFNOR EN
SMO 254 1.4547  S31254  2378  – – Z1 CNDU 20.18.06Az X1CrNiMoCuN20-18-7

SMO 254 Flanges useful information

Click on below links for 254 SMO™ flanges dimensions

Find a SMO 254 Flanges distributor in your location:

Regal Sales Corporation is a Govt. approved certified SMO 254 Flanges exporter in India. All of our SMO 254 Flanges are manufactured and tested to international standards, and specifications as per DIN, JIS, EN, ASTM etc. Regal Sales Corporation is known as a trusted vendor as a SMO 254 Flanges distributor & dealer in your country. We have huge stock in Asia, GCC, Gulf, Middle east, UK to supply with over 28 countries, we provide after sales service and fast delivery.

MIDDLE EAST

  • Saudi Arabia (KSA)
  • UAE
  • Iran
  • Iraq
  • Jordan
  • Qatar
  • Bahrain
  • Oman
  • Kuwait
  • Turkey
  • Yemen
  • Syria
  • Cyprus

AFRICA

  • South Africa
  • Nigeria
  • Algeria
  • Angola
  • Libya
  • Egypt
  • Gabon
  • Sudan
  • Equatorial Guinea
  • The Republic Of Congo
NORTH AMERICA
  • USA
  • Canada
  • Mexico
  • Panama
  • Costa Rica
  • Puerto Rica
  • Trinidad And Tobago
  • Jamaica
  • Bahamas
  • Denmark

EUROPE

  • UK
  • Netherland
  • Russia
  • Norway
  • Germany
  • France
  • Italy
  • Spain
  • Ukraine
  • Belgium
  • Greece
  • Hungary
  • Albania
  • Austria
  • Finland
  • Ireland
  • Croatia
  • Slovenia
  • Malta
  • Switzerland
  • Slovakia
  • Czech Republic
  • Portugal

ASIA

  • Malaysia
  • India
  • Taiwan
  • Cambodia
  • Singapore
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Sri Lanka
  • Maldives
  • Bangladesh
  • Mayanmar
SOUTH AMERICA
  • Venezuela
  • Argentina
  • Bolivia
  • Colombia
  • Ecuador
  • Guyana
  • Paraguay
  • Uruguay
  • Brazil
  • Chile
Stock an extensive range of SMO 254 Flanges, SMO 254 Flanges suppliers in Mumbai, India
Manufacting high-class SMO 254 Flanges in India, offer lowest price of SMO 254 Flanges, contact SMO 254 Flanges manufacturers in Mumbai, Pune & Chennai - India

@2018 Regal Sales Corporation. Website Designed & SEO By Mesotek