Stainless Steel 301 Flanges are made up of a chromium nickel austenitic stainless steel that can be cold worked to get good strength and corrosion resistance. There are different types of flanges such as welding neck flanges, slip on flanges, blind flanges, socket weld flanges and so on. These flanges belong to the ASTM A182 specifications. the ASTM A182 F301 Flanges can come in different dimensions such as ASTM, ASME, ANSI and DIN standards.
301 Stainless Steel Flanges
ASTM A182 F301 Flange
SS 301 Blind Flange
The pressure classes vary from 150 to 2500 for various dimensions of the flanges. The sizes range from ½ inches to 48 inches and wall thicknesses vary with the standards. The SS 301 Blind Flange is used to close a pipeline. There are different types of blind flanges such as the butterfly flange. These flanges are good to be used with any kind of SS UNS S30100 Pipe. The flanges also differ in face type as flat face, raised face and ring type joint. There are threaded, forged, screwed and plate flanges as well. The AISI 301 Stainless Steel Reducing Flanges are made from this material with 16% chromium 8% nickel, carbon, silicon, manganese, phosphorus, sulfur and nitrogen in the composition. the material has 125ksi minimum tensile strength and 75ksi minimum yield strength. The strength values vary for quarter hardened, half hardened, and full hardened flanges. The 301 SS SORF Flange is a slip on raised face flange that can allow the pipe to slip on and the raised face provides with additional connection surface for bolt holes. The applications of the flanges are seen in oil and gas, petroleum and petrochemical industries primarily
Size Chart | 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000 |
---|---|
Standards | API7S-15, API7S-43, API605, ANSI/ASME B16.5, B16.47 Series A & B, B16.48, ASME, BS, DIN, EN, BS4504, BS 10, EN-1092, DIN, ANSI, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, EN1092 |
Pressure Rating ANSI | 600 LBS, 900 LBS, 150 LBS, 2500 LBS, 300 LBS, 1500 LBS |
Pressure Calculation in DIN | 16Bar 6Bar 25Bar 40Bar 10Bar / PN10 PN16 PN6 PN25 PN64 PN40 |
JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
Coating | Anti-rust Paint, Zinc Plated,Oil Black Paint, Cold and Hot Dip Galvanized, Yellow Transparent |
Most common types | Forged / Threaded / Screwed / Plate |
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Production technique |
|
Connect Type/ Flange Face Type | Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Raised Face (RF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove |
Special design |
As per your drawing AS, ANSI, BS, DIN and JIS |
Test | Hydrostatic testing machine, X-ray detector, Direct-reading Spectrograph, UI trasonic flaw detector, Magnetic particle detector |
Equipment | Bending machine, Pushing Machine,Press machine, electric bevelling machine, Sand-blasting machine etc |
Origin | Indian / West Europe / Japan / USA / Korean |
Manufacturer of |
ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
|
Uses & application |
|
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
301 Stainless Steel Plate Flange
ASTM A182 Stainless Steel 301 Slip On Flange
AISI 301 Stainless Steel Reducing Flange
ASME SA182 SS 301 Blind Flange
SS 301 Threaded Flange
UNS S30100 Long Weld Neck Flange
Type 301 Stainless Steel Square Flange
ASME SA182 UNS S30100 Spade Flange
ASTM A182 UNS S30100 Forged Flange
301 Grade Stainless Steel Weldoflange
SUS 301 Socket Weld Flange
Stainless Steel 301 WNRF Flange
Nominal Pipe Size | Drilling | Length of Bolts | Approximate Weight in Pounds |
||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Diameter of Bolt Circle |
Number of Bolts | Diameter of Bolts | Diameter of Holes |
Stud Bolts | Machine Bolts 1/16” R.F. | Welding Neck | Slip-on Threaded | Lap Joint | Blind | ||
1/16” Raised Face | Ring Joint | ||||||||||
1/2 | 2-3/8 | 4 | 1/2 | 5/8 | 2-1/4 | 1-3/4 | 2 | 2 | 2 | 2 | |
3/4 | 2-3/4 | 4 | 1/2 | 5/8 | 2-1/4 | 2 | 2 | 2 | 2 | 2 | |
1 | 3-1/8 | 4 | 1/2 | 5/8 | 2-1/2 | 3 | 2 | 2 | 2 | 2 | 2 |
1-1/4 | 3-1/2 | 4 | 1/2 | 5/8 | 2-1/2 | 3 | 2-1/4 | 4 | 3 | 3 | 3 |
1-1/2 | 3-7/8 | 4 | 1/2 | 5/8 | 2-3/4 | 3-1/4 | 2-1/4 | 5 | 3 | 3 | 4 |
2 | 4-3/4 | 4 | 5/8 | 3/4 | 3 | 3-1/2 | 2-3/4 | 9 | 5 | 5 | 5 |
2-1/2 | 5-1/2 | 4 | 5/8 | 3/4 | 3-1/4 | 3-3/4 | 3 | 11 | 7 | 7 | 7 |
3 | 6 | 4 | 5/8 | 3/4 | 3-1/2 | 4 | 3 | 14 | 8 | 8 | 9 |
3-1/2 | 7 | 8 | 5/8 | 3/4 | 3-1/2 | 4 | 3 | 15 | 11 | 11 | 13 |
4 | 7-1/2 | 8 | 5/8 | 3/4 | 3-1/2 | 4 | 3 | 16 | 13 | 13 | 19 |
5 | 8-1/2 | 8 | 3/4 | 7/8 | 3-3/4 | 4-1/4 | 3-1/4 | 21 | 15 | 15 | 21 |
6 | 9-1/2 | 8 | 3/4 | 7/8 | 3-3/4 | 4-1/4 | 3-1/4 | 25 | 19 | 19 | 28 |
8 | 11-3/4 | 8 | 3/4 | 7/8 | 4 | 4-1/2 | 3-1/2 | 40 | 30 | 30 | 48 |
10 | 14-1/4 | 12 | 7/8 | 1 | 4-1/2 | 5 | 3-3/4 | 56 | 42 | 42 | 70 |
12 | 17 | 12 | 7/8 | 1 | 4-1/2 | 5 | 4 | 86 | 64 | 64 | 105 |
14 | 18-3/4 | 12 | 1 | 1-1/8 | 5 | 5-1/2 | 4-1/4 | 111 | 85 | 99 | 135 |
16 | 21-1/4 | 16 | 1 | 1-1/8 | 5-1/4 | 5-3/4 | 4-1/2 | 141 | 94 | 128 | 176 |
18 | 22-3/4 | 16 | 1-1/8 | 1-1/4 | 5-3/4 | 6-1/4 | 4-3/4 | 153 | 120 | 146 | 214 |
20 | 25 | 20 | 1-1/8 | 1-1/4 | 6 | 6-1/2 | 5-1/4 | 188 | 155 | 185 | 284 |
24 | 29-1/2 | 20 | 1-1/4 | 1-3/8 | 6-3/4 | 7-1/4 | 5-3/4 | 270 | 210 | 260 | 398 |
Carbon | 0.15 max |
Chromium | 16 - 18 |
Iron | 0.4 max |
Manganese | 2 max |
Nickel | 6 - 8 |
Phosphorus | 0.045 max |
Silicon | 1 max |
Sulphur | 0.03 max |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Density (lb / cu. in.) | 0.29 |
Specific Gravity | 7.8 |
Specific Heat (Btu/lb/Deg F - [32-212 Deg F]) | 0.12 |
Electrical Resistivity (microhm-cm (at 68 Deg F)) | 432 |
Modulus of Elasticity Tension | 28 |