410S Stainless Steel Fasteners
410S Stainless Steel Fasteners are made up of a martensitic stainless steel which has high wear and tear resistance. The material is also magnetic in ordinary and in annealed conditions. The composition includes carbon, manganese, silicon, phosphorus, sulfur, 13.5% chromium and nickel. The ASTM A194 SS 410s Fasteners have 480MPa minimum tensile strength and 275MPa minimum yield strength with 16% elongation.
410S Stainless Steel Fasteners
410S Stainless Steel Threaded Rod
410S Stainless Steel Hex Bolts
There are different types of fasteners with different specifications, standards and dimensions. The types range as nuts, bolts, screws, sockets, studs, hex set screws, cap screws and so on. The SS 410s Socket Head Cap Screw and other fasteners in this grade of material come in ASTM A 193 and 194 specifications with all international standards including DIN, ASTM and BS. The length of the fasteners range from 3mm to 200mm. The Stainless Steel 410s Nuts range in size from M3 to M56 or from 3.6 inches to 2 inches. The machine screws range from M1.6 through M12. And the screws and bolts such as the SS 410s Socket Head Screw range in size from M3 to M56 as well. These are high strength, high temperature capable fasteners that can operate with high wear and tear resistance. The applications of the SS 410s Stud Bolt and other fasteners can be seen in min ladder rungs, gas turbines, shafts, bushings, valves, pumps and in petroleum industrial applications as well.
Table of Content
| 410s Stainless Steel Bolts Dimensions Standard and Specification | ASTM A193 / SA 193, ASTM A194 / SA 194 |
| ASTM A276 Type 410s SS Fasteners International Specifications | DIN, ASTM, BS and all International Standards |
| Stainless Steel 410s Bolts Available Length | 3 - 200 mm |
| UNS S410s00 SS 410s Nuts Size range | M3 - M56 | 3/6" to 2" or custom sizes |
| DIN 1.4006 410s Stainless Bolts or Screw Sizes | M3 - M56 | 3/6" to 2" or custom sizes |
| SS 410s Machine Screws manufacturing Size range | M1.6 - M12 |
| AISI 410s UNS S410s00 Washers Sizes | M3 - M56 | 3/6" to 2"or as required |
| Most common types of ASTM A479 UNS S410s00 Fasteners we manufacture |
|
410s Stainless Steel Eye Nuts
410s SS Flange Bolts
ASTM A276 Type 410s SS Heavy Hex Bolts
UNS S41008 SS 410s Jam Nuts
SS 410s Panel Nuts
SS 410s Hex Bolts
410s Stainless Steel Stud Bolts
AISI 410s UNS S41008 Wood Screw
Stainless Steel 410s Concrete Screws
SS 410s Threaded Studs
410s Stainless Steel Square Washer
Stainless Steel 410s Lock Washer
| D1D1 | K | E | S |
|---|---|---|---|
| M3 | 2 | 6.01 | 5.5 |
| M4 | 2.8 | 7.66 | 7 |
| M5 | 3.5 | 8.79 | 8 |
| M6 | 4 | 11.05 | 10 |
| M8 | 5.3 | 14.38 | 13 |
| M10 | 6.4 | 18.9 | 17 |
| M12 | 7.5 | 21.1 | 19 |
| M14 | 8.8 | 24.49 | 22 |
| M16 | 10 | 26.75 | 24 |
| M18 | 11.5 | 30.14 | 27 |
| M20 | 12.5 | 33.53 | 30 |
| M22 | 14 | 35.72 | 32 |
| M24 | 15 | 39.98 | 36 |
| M27 | 17 | 45.2 | 41 |
| M30 | 18.7 | 50.85 | 46 |
| M33 | 21 | 55.37 | 50 |
| M36 | 22.5 | 60.79 | 55 |
| M42 | 26 | 71.3 | 65 |
| M48 | 30 | 82.6 | 75 |
| Grade | Material | Chemical Composition (% maxima unless stated) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Si | Mn | P | S | Cr | Mo | Ni | Cu | ||||||
| C1 | AISI 410s | 0.09-0.15 | 1.0 | 1.0 | 0.05 | 0.03 | 11,5 - 14,0 | - | 1 | - | ||||
| Type | Tensile Stress | Yield Stress (0.2% offset) | Elongation in 2” (50.80mm) % | Hardness (Rockwell) | ||
|---|---|---|---|---|---|---|
| Ksi | MPa | Ksi | MPa | |||
| 410s | 70 | 483 | 45 | 310 | 25 | B80 |
| German (EN) | British (BS) | French | Italian | Japanese (SUS) | Swedish | USA (SS) |
|---|---|---|---|---|---|---|
| 1.40061.4024 | 410S21 | Z12C13 | X12Cr 13 | SUS410 | 13 23 02 | 410 |