Super Duplex Steel Flanges

Super Duplex 2507 Flanges, Super Duplex Stainless Steel Flanges.

Super Duplex Flanges Pressure Rating, Super Duplex Flanges Material.

Regal Sales Corporation is one of the recommended manufacturer of Super Duplex Steel Flanges In India. Our Super Duplex 2507 Flanges contain larger amounts of chromium in comparison with other steels and thus have good corrosion resistance. Type ASTM A182 Super Duplex Steel Lap Joint Flanges contain about 10% of chromium. Type Super Duplex Steel Blind Flanges are thermally stable and possess moderate strength even when the temperature is high. Super Duplex Plate Flanges whose design enables combining improved resistance to pitting, high strength, stress corrosion, crevice corrosion and cracking. Super Duplex Slip On Flange resists sulfide stress corrosion and chloride environments. Super Duplex Flat Face Flange is important part of duplex steel flange family. Super Duplex Spectacle Blind Flange & Super Duplex Steel 2507 Threaded Flange is hot worked in the temperature range of 954-1149°C (1750-2100°F).

Our Super Duplex Steel S32750 Flange have great resistance to sea water-related corrosion due to the presence of significant amounts of stainless steel iron. Stockist of Super Duplex Steel RF Flanges. The benefits of our Super Duplex Steel 2507 Flanges include a long service life that will retain an attractive, clean finish with low maintenance cost.

Super Duplex 2507 Flanges manufacturers in India

Regal Sales Corporation is manufacturer of Super Duplex Flanges, forged, ASTM A182 UNS S32750 (dual marked and certified), ASME B16.5, annealed and fully machined, raised face, smooth finish (125-250 RMS / 3.2-6.3µM) to MSS-SP6, SS 2507 Flange hardness as per NACE MR0175 and tested to ASTM A262 E and PMI.

ASTM A182 Grade UNS S32750 Orifice Flange


ASTM A182 Grade UNS S32750 Orifice Flange

SA 182 UNS S32750 Blank Flange


SA 182 UNS S32750 Blank Flange

ASTM A182 UNS S32750 Anchor Flange


ASTM A182 UNS S32750 Anchor Flange

ASTM A182 UNS S32750 Screw Flange


ASTM A182 UNS S32750 Screw Flange

Super Duplex 2507 Flanges Specification and Standards

Specifications Super Duplex 2507 Flanges
ASME B16.5 Super Duplex Flange size range 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Super Duplex Flanges Standards ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges.
Super Duplex Flange Standard ANSI Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Super Duplex Flange Standard DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
Super Duplex Flange Standard JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
Super Duplex Flange Standard UNI 6Bar 10Bar 16Bar 25Bar 40Bar
Super Duplex Flange Standard EN 6Bar 10Bar 16Bar 25Bar 40Bar
Main Types Forged / Threaded / Screwed / Plate
Flange supporting material Gasket, Ring Joint, Flange Bolts
Super Duplex Pipe Flanges Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Most common types of Super Duplex Flanges
  • Weld Neck Ring Flange (WNRF), Super Duplex
  • Slip-On Ring Flange (SORF), Super Duplex
  • Blind Ring Flange (BLRF), Super Duplex
  • Socket Weld Ring Flange (SWRF), Super Duplex
  • Threaded Ring Flange, Super Duplex
  • Lap Joint Ring Flange (LJRF), Super Duplex
  • Ring Type Joint Flange (RTJF), Super Duplex
Production technique
  • Forged, Heat treated and machined
Connect Type/ Flange Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

Super Duplex Threaded Flange, Socketweld Flange, Slip-On Flange, Blind Flange, Weld Neck Flange

Test Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Equipment Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Origin Indian / West Europe / Japan / USA / Korean
Specialized manufacturer of
  • Rtj Flange
  • Pn16 Flange
  • DIN 2566 pn16
  • DIN 2566 en 1092 1
  • DIN 2566 pn10
  • Super Duplex Large Diameter Flange
  • Super Duplex Sorf Flange
  • Super Duplex Blind Flanges
  • Super Duplex Table Flanges
  • Super Duplex Weld Neck Flanges
  • Super Duplex Threaded Flanges
  • Super Duplex Slip-On Flanges
  • Super Duplex Socketweld Flanges
  • Super Duplex Plate Flanges
  • Super Duplex Lap Joint Flanges
  • Super Duplex Loose Flanges
  • Super Duplex Orifice Flanges
  • Super Duplex AS 4087 Water Flanges
Super Duplex 2507 Flanges Standard

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

  • B.S: BS4504 , BS3293, BS1560, BS10
  • AS 2129: Table D; Table E; Table H
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • American standard (ANSI)
  • German (DIN)
  • British standard (BS)
  • Any other specilised flanges
  • DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
  • The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
Key markets and industries for Super Duplex Flanges
  • Bitumen upgraders.
  • Heavy oil refineries.
  • Nuclear power (mostly seamless).
  • Petrochemicals and acids.
Export to Ireland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc
Super Duplex 2507 Flanges Application
  • To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Super Duplex Pipe Flange Dimensions

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
  • ASME B1.20.1, Pipe Threads, General Purpose
  • ASME B16.1, Cast Iron Flanges and Flanged Fittings Classes 25, 125 and 250
  • ASME B16.5, Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24
  • ASME B16.11, Forged Fittings, Socket Welding and Threaded
  • ASME B16.25, Buttwelding Ends
  • ASME B16.36, Orifice Flanges
  • ASME B16.47, Large Diameter Steel Flanges NPS 26 Through NPS 60
  • ASME B31.1, Power Piping
  • ASME B31.3, Process Piping
  • ASME B46.1, Surface Texture (Surface Roughness, Waviness, and Lay)

Prestige quality Super Duplex 2507 Flanges manufacturers in India offer these Super Duplex 2507 Flanges in DIN, ISO, JIS or ANSI standard.

Super Duplex Steel 2507 Flanges Weight Chart

15mm (1/2") Super Duplex Flange Weight Chart

Standard Class Diameter Bolt Circle Diameter Number of Bolts Bolt Size Diameter of Bolt Hole
AS4087 Flanges PN14 Flanges 95 67 4 M12 14
AS 2129 Flange Table C Flanges 95 67 4 13 14
Table D Flanges 95 67 4 13 14
Table E Flanges 95 67 4 13 14
Table F Flanges 95 67 4 13 14
Table H Flanges 114 83 4 16 17
Table J Flanges 114 83 4 16 17
ANSI B16.5 Flanges ANSI 150 Flanges 89 60 4 13 16
ANSI 300 Flanges 95 67 4 13 16
ANSI 600 Flanges 95 67 4 13 16
ANSI 900 Flanges 121 83 4 19 22
ANSI 1500 Flanges 121 83 4 19 22
ISO 7005 (DIN) Flange PN6 Flanges 80 55 4 M10 11
PN10 Flanges 95 65 4 M12 14
PN16 Flanges 95 65 4 M12 14
PN20 Flanges 90 60.5 4 M14 16
PN25 Flanges 95 65 4 M12 14
PN40 Flanges 95 65 4 M12 14

Regal Sales Corporation is an ISO certified Super Duplex 2507 Flanges manufacturer & distributor in India

Regal Sales Corporation is a manufacturer and supplier of Super Duplex 2507 Flanges offering in all Ratings up to 2500#, built a distribution network with more then 65 countries globally.

ASTM A182 UNS S32750 Pipe Flanges Super Duplex Steel 2507 Raised Face Slip On Flanges
ASTM A182 UNS S32750 Exhaust Flanges ASME SA182 UNS S32750 Slip On Plate Flanges
ASTM A182 UNS S32750 Header Flanges 2507 Super Duplex Slip On Flanges
ASTM A182 UNS S32750 Plate Flanges A182 UNS S32750 Pipe Flanges
ASTM A182 UNS S32750 Backing Flanges Super Duplex Steel 2507 Exhaust Flanges
ASTM A182 UNS S32750 Tube Flanges ASME SA182 2507 Header Flanges
ASTM A182 UNS S32750 Stub End Flanges Super Duplex Steel 2507 Raised Face Weld Neck Flanges
ASTM A182 UNS S32750 Shower Rod Flanges ASTM A182 UNS S32750 Sae Flanges
ASTM A182 UNS S32750 Slip On Flanges 2507 Super Duplex Weld Neck Flange
ASTM A182 UNS S32750 Screwed Flanges ASTM A182 UNS S32750 Clad Flanges
ASTM A182 UNS S32750 Socket Weld Flanges ASTM A182 UNS S32750 Super Duplex WNRF Flange
ASTM A182 UNS S32750 Sbc Header Flanges Super Duplex Steel 2507 Raised Face Blind Flanges
ASTM A182 UNS S32750 Split Flanges ASME SA182 UNS S32750 Blind Flanges
ASTM A182 UNS S32750 Slip-On Pipe Flanges 2507 Super Duplex Blind Flange
ASTM A182 UNS S32750 Square Flanges ASTM A182 UNS S32750 Ansi Flanges
Ansi 150 ASTM A182 UNS S32750 Flanges ASTM A182 UNS S32750 Super Duplex BLRF Flanges
ASTM A182 UNS S32750 Blank Flanges Super Duplex Steel 2507 Orifice Flanges
ASTM A182 UNS S32750 Bsp Flanges ASME SA182 UNS S32750 Orifice Flanges
ASTM A182 UNS S32750 Companion Flanges 2507 Super Duplex Orifice Flanges
ASTM A182 UNS S32750 Class 150 Flanges ASTM A182 UNS S32750 Duct Flanges
ASTM A182 UNS S32750 Cover Flanges A182 2507 Super Duplex Orifice Flanges
Custom ASTM A182 UNS S32750 Flanges Super Duplex Steel 2507 Socket weld Flanges
Class 600 ASTM A182 UNS S32750 Flanges ASME SA182 UNS S32750 Socket weld Flanges
ASTM A182 UNS S32750 Din Flanges 2507 Super Duplex Socket weld Flanges
Large Diameter ASTM A182 UNS S32750 Flanges ASTM A182 UNS S32750 SWRF Flanges
Table E ASTM A182 UNS S32750 Flanges ASME B16.5 2507 Super Duplex Socket weld Flanges
ASTM A182 UNS S32750 Floor Flanges Super Duplex Steel 2507 Threaded Flanges
ASTM A182 UNS S32750 Forged Flanges ASME SA182 UNS S32750 Threaded Flanges
Gaskets For ASTM A182 UNS S32750 Flanges 2507 Super Duplex Threaded Flanges
ASTM A182 UNS S32750 Handrail Flanges ASTM A182 UNS S32750 Manifold Flanges
High Pressure ASTM A182 UNS S32750 Flanges ASTM A182 UNS S32750 Threaded Flanges
ASTM A182 UNS S32750 Lap Joint Flanges ASTM A182 Super Duplex 2507 Threaded Flanges
ASTM A182 UNS S32750 Long Weld Neck Flanges Super Duplex Steel 2507 Long weld Neck Flanges
ASTM A182 UNS S32750 Metric Flanges ASME SA182 UNS S32750 Long weld Neck Flanges
ASTM A182 UNS S32750 Muffler Flanges 2507 Super Duplex Long weld Neck Flanges
ASTM A182 UNS S32750 Pump Flanges ASTM A182 UNS S32750 Orifice Flanges
ASTM A182 UNS S32750 Pressed Flanges Super Duplex Steel 2507 Ring Type Joint Flanges
ASTM A182 UNS S32750 Puddle Flanges ASME SA182 UNS S32750 Ring Type Joint Flange
ASTM A182 UNS S32750 Pad Flanges 2507 Super Duplex RTJ Flanges
ASTM A182 UNS S32750 Reducing Flanges Super Duplex Steel RTJ Flanges
ASTM A182 UNS S32750 Raised Face Flanges ASTM A182 UNS S32750 RTJ Flanges
ASTM A182 UNS S32750 Ring Flanges BS4504 Super Duplex 2507 RTJ Flanges
ASTM A182 UNS S32750 Threaded Reducing Flanges Super Duplex Steel 2507 Reducing Flanges
ASTM A182 UNS S32750 Wnrf Flanges ASME SA182 UNS S32750 Reducing Flanges
ASTM A182 UNS S32750 Split Flanges 2507 Super Duplex Reducing Flange
ASTM A182 UNS S32750 Turbo Flanges ASTM A182 UNS S32750 Forged Flanges
ASTM A182 UNS S32750 Vacuum Flanges ASTM A182 UNS S32750 Reducing Flange
ASTM A182 Super Duplex 2507 Reducing Flanges 2507 Super Duplex Forged Flange

Manufacturing Super Duplex 2507 Flanges in India, Regal Sales Corporation holds a wide range of Super Duplex 2507 Flanges in stock for immediate despatch throughout India & globally.

Special offer on:

Flange Schedule/Class Pipe Size - Pipe Flanges Flange Connection Type Flange Material Max. Pressure
ASME B16.5 Class 150 1/2" FNPT Super Duplex 150 psi
ASME B16.5 Class 150 1/2" Socket Weld Forged Super Duplex 275 psi
ASME B16.5 Class 150 1/2" Welded Super Duplex 150 psi
ASME B16.5 Class 150 3/4" FNPT Super Duplex 150 psi
ASME B16.5 Class 150 3/4" Socket Weld Forged Super Duplex 275 psi
ASME B16.5 Class 150 1-1/4" Socket Weld Forged Super Duplex 275 psi
ASME B16.5 Class 150 1-1/2" Socket Weld Forged Super Duplex 275 psi
ASME B16.5 Class 150 2" FNPT Super Duplex 150 psi
ASME B16.5 Class 150 2" Socket Weld Forged Super Duplex 275 psi
ASME B16.5 Class 150 2-1/2" Socket Weld Forged Super Duplex 275 psi
ASME B16.5 Class 150 3" Socket Weld Forged Super Duplex 275 psi
ASME B16.5 Class 150 4" FNPT Super Duplex 150 psi
ASME B16.5 Class 150 4" Socket Weld Forged Super Duplex 275 psi
ASME B16.5 Class 300 1/2" Slip On Forged Super Duplex 720 psi
ASME B16.5 Class 300 1/2" Slip On Forged Super Duplex 720 psi
ASME B16.5 Class 300 1" Slip On Forged Super Duplex 720 psi
ASME B16.5 Class 300 1" Slip On Forged Super Duplex 720 psi
ASME B16.5 Class 300 1-1/4" FNPT Forged Super Duplex 720 psi
ASME B16.5 Class 300 1-1/4" Slip On Forged Super Duplex 720 psi
ASME B16.5 Class 300 1-1/2" Slip On Forged Super Duplex 720 psi
ASME B16.5 Class 300 1-1/2" Slip On Forged Super Duplex 720 psi
ASME B16.5 Class 300 2" Slip On Forged Super Duplex 720 psi
ASME B16.5 Class 300 2" Slip On Forged Super Duplex 720 psi
ASME B16.5 Class 300 2-1/2" Slip On Forged Super Duplex 720 psi
ASME B16.5 Class 300 2-1/2" Slip On Forged Super Duplex 720 psi
ASME B16.5 Class 300 3" Slip On Forged Super Duplex 720 psi
ASME B16.5 Class 300 3" Slip On Forged Super Duplex 720 psi
ASME B16.5 Class 300 4" Slip On Forged Super Duplex 720 psi
ASME B16.5 Class 300 4" Slip On Forged Super Duplex 720 psi

Super Duplex Steel 2507 Forged and Plate Flange

Super Duplex Steel 2507 Flange
ASTM A182 Super Duplex Steel 2507 Slip-On Flange ASTM A182 Super Duplex Steel 2507 Threaded Flange
ASTM A182 Super Duplex Steel 2507 Weld Neck Flange ASTM A182 Super Duplex Steel 2507 Socket Weld Flange
ASTM A182 Super Duplex Steel 2507 Blind Flange ASTM A182 Super Duplex Steel 2507 Reducing Flange
ASTM A182 Super Duplex Steel 2507 Lap Joint Flange ASTM A182 Super Duplex Steel 2507 Plate Flange
ASTM A182 Super Duplex Steel 2507 Orifice Flange ASTM A182 Super Duplex Steel 2507 Forged Flange
ASTM A182 Super Duplex Steel 2507 Ring Type Joint Flange ASTM A182 Super Duplex Steel 2507 Square Flange

Super Duplex Pipe Flange Pressure Ratings

Super Duplex 2507 Flanges Flange Standards / Types and Pressure Class :

ASME/ANSI B 16.36 Welding Neck Flange, Slip on Flange, Threaded Flange
PRESSURE CLASS 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.5 Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47 Welding Neck Flange, Blind Flange [Series A & B]
PRESSURE CLASS 75, 150, 300, 400, 600, 900
BS 4504 SEC 3.1 Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 40
BS 4504[PART 1] Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 400
BS 1560 BOSS Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
BS10 Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE D, E, F, H
DIN FLANGES DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS PN 6 TO PN 100

Super Duplex 2507 Flanges Chemical Composition

Grade C Mn Si P S Cr Mo Ni N Fe
S32750 0.030 max 1.20 max 0.80 max 0.035 max 0.020 max 24.00 – 26.00 3.00 – 5.00 6.00 – 8.00 0.24 – 0.32 58.095 min

Super Duplex 2507 Flanges mechanical properties

Grades Density (g/cm 3) Density (lb/in 3) Melting Point (°C) Melting Point (°F)
S32750 7.8 0.281 1350 2460

Equivalent Grades for Super Duplex 2507 Flanges

STANDARD WERKSTOFF NR. UNS
Super Duplex 2507 1.4410 S32750

Super Duplex 2507 Flanges useful information

Click on below links for Super Duplex Steel 2507 flanges dimensions

Find a Super Duplex 2507 Flanges distributor in your location:

Regal Sales Corporation is a Govt. approved certified Super Duplex 2507 Flanges exporter in India. All of our Super Duplex 2507 Flanges are manufactured and tested to international standards, and specifications as per DIN, JIS, EN, ASTM etc. Regal Sales Corporation is known as a trusted vendor as a Super Duplex 2507 Flanges distributor & dealer in your country. We have huge stock in Asia, GCC, Gulf, Middle east, UK to supply with over 28 countries, we provide after sales service and fast delivery.

MIDDLE EAST

  • Saudi Arabia (KSA)
  • UAE
  • Iran
  • Iraq
  • Jordan
  • Qatar
  • Bahrain
  • Oman
  • Kuwait
  • Turkey
  • Yemen
  • Syria
  • Cyprus

AFRICA

  • South Africa
  • Nigeria
  • Algeria
  • Angola
  • Libya
  • Egypt
  • Gabon
  • Sudan
  • Equatorial Guinea
  • The Republic Of Congo
NORTH AMERICA
  • USA
  • Canada
  • Mexico
  • Panama
  • Costa Rica
  • Puerto Rica
  • Trinidad And Tobago
  • Jamaica
  • Bahamas
  • Denmark

EUROPE

  • UK
  • Netherland
  • Russia
  • Norway
  • Germany
  • France
  • Italy
  • Spain
  • Ukraine
  • Belgium
  • Greece
  • Hungary
  • Albania
  • Austria
  • Finland
  • Ireland
  • Croatia
  • Slovenia
  • Malta
  • Switzerland
  • Slovakia
  • Czech Republic
  • Portugal

ASIA

  • Malaysia
  • India
  • Taiwan
  • Cambodia
  • Singapore
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Sri Lanka
  • Maldives
  • Bangladesh
  • Mayanmar
SOUTH AMERICA
  • Venezuela
  • Argentina
  • Bolivia
  • Colombia
  • Ecuador
  • Guyana
  • Paraguay
  • Uruguay
  • Brazil
  • Chile
Stock an extensive range of Super Duplex 2507 Flanges, Super Duplex 2507 Flanges suppliers in Mumbai, India
Manufacting high-class Super Duplex 2507 Flanges in India, offer lowest price of Super Duplex 2507 Flanges, contact Super Duplex 2507 Flanges manufacturers in Mumbai, Pune & Chennai - India