ASTM A182 F53 UNS S32750 Flange
Super Duplex UNS S32750 /F53 Flanges are made from a super duplex stainless steel grade that has 24% chromium, 3% molybdenum, 6% nickel and carbon, manganese, silicon, sulfur, phosphorus, nitrogen and iron in the composition. The ASTM A182 F53 UNS S32750 Flange comes under the ASTM A182 specification for high temperature and high pressure services.
ASTM A182 F53 UNS S32750 Flange
UNS S32750 Flange
SA 182 F53 S32750 Blind Flanges
The material has high strength and corrosion resistance. The A182 F53 material is used to make flanges ranging from ½ inches to 48 inches under different standards such as ANSI, ASME, DIN and other international standards. There are different pressure ratings for the flanges based on the system of measurement. Under the ANSI standard, the pressure classes range from class 150 through class 2500. There are SA 182 F53 S32750 Blind Flanges, socket weld flanges and weld neck flanges in this range of material. The different flanges are used in different applications set ups. The ASTM A182 UNS S32750 Slip On Flanges are good to use with seamless pipes. They have a design that allows for the pipes to pass through the flange and locate the correct point for connection. The ASTM A182 grade F53 WNRF Flange has a welded neck raised face. The raised face allows for the flange to have more bolt holes and connection surface while the welded neck grips the pipe in place. The applications are oil and gas, petroleum, petrochemical and other industrial applications.
Table of Content
| Specifications | ASTM A182 / ASME SA182 |
|---|---|
| ASTM A182 S32750 Flange HS Code | ASTM A182 UNS S32750 Flange HS Code : 7307 |
| ASTM A182 F53 Flanges Standards | BS Flanges, ANSI/ ASME B16.5, B16.47 Series A & B, B16.48, BS4504, EN-1092, BS 10, ANSI Flanges, ASME Flanges, DIN Flanges, EN Flanges, GOST Flanges. |
| SA 182 F53 S32750 Flanges Standard ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| ASTM A182 UNS S32750 Flanges Standard DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
| UNS S32750 Flanges Standard JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
| ASTM A182 UNS S32750 Flanges Standard UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| A182 gr F53 Flange Standard EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
| ASME B16.5 ASTM A182 UNS S32750 Flange size range | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
| ASTM A182 S32750 Flange supporting material | Gasket, Ring Joint, Flange Bolts |
| ASTM A182 UNS S32750 Pipe Flanges Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| A182 S32750 Flanges Production technique | |
| Main Types | Forged / Threaded / Screwed / Plate |
| ASTM A182 F53 Super Duplex Flange Connect Type/ Flange Face Type | Small Tongue, Raised Face (RF), Ring Type Joint (RTJ), Large Male-Female (LMF), Small Male-Female (SMF), Lap-Joint Face (LJF), Flat Face (FF), Large Tongue & Groove |
| Super Duplex ASTM A182 F53 UNS S32750 Flange Test | UI trasonic flaw detector, X-ray detector, Direct-reading Spectrograph, Hydrostatic testing machine, Magnetic particle detector |
| Equipment for A182 F53 Flange | Sand-blasting machine, Press machine, Bending machine, Pushing Machine, electric bevelling machine etc |
| Special design | As per your drawing AS, ANSI, BS, DIN and JIS |
| Key markets and industries for ASTM A182 UNS S32750 Flanges | |
| ASTM A182 F53 UNS S32750 Application | |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
ASTM A182 UNS S32750 Slip On Flange
ASTM A182 gr F53 UNS S32750 Weld Neck Flange
SA 182 F53 S32750 Blind Flange
A182 S32750 Orifice Flange
A182 grade F53 Square Flange
A182 F53 UNS S32750 Swivel Flange
SA 182 F53 S32750 Forged Flange
A182 UNS S32750 Reducing Flange
UNS S32750 Threaded Flange
A182 gr F53 Socket weld Flange
A182 UNS S32750 Long weld Neck Flange
F53 UNS S32750 RTJ Flange
| ASME/ANSI B 16.5 | Welding Neck Flange, Socket Weld Flange, Blind (BLRF) Flange, Lap Joint Flange, Slip on Flange, Threaded Flange, Ring Type Joint Flange, High Hub Blind Flange |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| ASME/ANSI B 16.36 | Threaded Flange, Welding Neck Flange, Slip on Flange (SORF) |
| PRESSURE CLASS | 300, 400, 600, 900, 1500, 2500 |
| ASME/ANSI B 16.47 | Weld Neck Flange, Blind Flange [Series A & B] |
| PRESSURE CLASS | 75, 150, 300, 400, 600, 900 |
| BS 4504 SEC 3.1 | Blank Flange, Hubbed Threaded Flange, Welding Neck Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Hubbed Slip on Flange |
| PRESSURE CLASS | PN 2.5 TO PN 40 |
| BS 1560 BOSS | Blind (BLRF) Flange, Slip-On Flange, Welding Neck Flange, Socket Welding Flange, Lapped Flange, Screwed Boss Flange |
| PRESSURE CLASS | 150, 300, 400, 600, 900, 1500, 2500 |
| BS10 | Plate Slip-On Flange, Blind Flange, Welding Neck Flange, Screwed Boss Flange, Slip-On Boss Flange |
| TABLE | D, E, F, H |
| DIN FLANGE | DIN 2527, 2566, 2573, 2576, 2641, 2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637, 2638, 2673 |
| PRESSURE CLASS | PN 6 TO PN 100 |
| BS 4504[PART 1] | Hubbed Slip-On, Loose Plate With Weld On Plate Collar, Welding Neck Flange, Plate Flange, Blank Flange, Hubbed Threaded |
| PRESSURE CLASS | PN 2.5 TO PN 400 |
| Standard | Class | Diameter | Bolt Circle Diameter | Number of Bolts | Bolt Size | Diameter of Bolt Hole |
|---|---|---|---|---|---|---|
| AS4087 | PN14 | 95 | 67 | 4 | M12 | 14 |
| AS 2129 | Table C | 95 | 67 | 4 | 13 | 14 |
| Table D | 95 | 67 | 4 | 13 | 14 | |
| Table E | 95 | 67 | 4 | 13 | 14 | |
| Table F | 95 | 67 | 4 | 13 | 14 | |
| Table H | 114 | 83 | 4 | 16 | 17 | |
| Table J | 114 | 83 | 4 | 16 | 17 | |
| ANSI B16.5 | ANSI 150 | 89 | 60 | 4 | 13 | 16 |
| ANSI 300 | 95 | 67 | 4 | 13 | 16 | |
| ANSI 600 | 95 | 67 | 4 | 13 | 16 | |
| ANSI 900 | 121 | 83 | 4 | 19 | 22 | |
| ANSI 1500 | 121 | 83 | 4 | 19 | 22 | |
| ISO 7005 (DIN) | PN6 | 80 | 55 | 4 | M10 | 11 |
| PN10 | 95 | 65 | 4 | M12 | 14 | |
| PN16 | 95 | 65 | 4 | M12 | 14 | |
| PN20 | 90 | 60.5 | 4 | M14 | 16 | |
| PN25 | 95 | 65 | 4 | M12 | 14 | |
| PN40 | 95 | 65 | 4 | M12 | 14 |
| C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
|---|---|---|---|---|---|---|---|---|---|
| 0.030 max | 1.20 max | 0.80 max | 0.035 max | 0.020 max | 24.00 – 26.00 | 3.00 – 5.00 | 6.00 – 8.00 | 0.24 – 0.32 | 58.095 min |
| Density (g/cm 3) | Density (lb/in 3) | Melting Point (°C) | Melting Point (°F) |
|---|---|---|---|
| 7.8 | 0.281 | 1350 | 2460 |