ASTM A182 F55 Flanges
Manufacturer of UNS S32760 Flanges in India, With Best Quality Material
Super Duplex UNS S32760 /F55 Flanges consist of the super duplex form of stainless steel.In this alloy system, Chromium, Nickel, Molybdenum, Copper, Tungsten, Carbon, Nitrogen, Manganese, Silicon, Phosphorus, Iron and Sulfur are present in 24%, 6%, 3 %, elemental copper, tungsten carbide stabilization, carbon, nitrogen, manganese, silicon, ASTM A182 F55 Flange have both higher tensile strength and better Corrosion resistance than the flange having other specification. Flanges are classified by the sales standards of the worldwide market, including ANSI B16.5, ANSI B16.47 and more.
ASTM A182 F55 Flanges Manufacturer in India, The flanges are made in different face types. The face types range as flat face, raised face and ring type joint. The SA182 F55 RTJ Flange has a ring type joint. The flange is fixed in two halves. The flange end has a groove machined into the surface. The two halves are joined by a ring around what appears like a groove in the center which is squeezed in. Blind Flanges are helpful in shutting the pipeline.
The blind flanges are made in different types as well. The flanges are made as forged, screwed, threaded and plate flanges. There are different pressure classes depending on the dimensions. ASTM A182 Gr F55 Slip On Flanges and other flanges, are available in pressure ratings starting from class 150 going up to class 2500. The typical sizes of flanges vary in sizes which are between 1/8 inch and 48 inches. The UNS S32760 F55 Threaded Flangeis used with threaded pipes. The male threaded pipe end is connected with female threaded flanges.
Table of Content
- Specifications Of ASTM A182 F55 Flanges
- Types Of ASTM A182 F55 Flanges
- Size Chart Of A182 F55 Super Duplex Flange
- Thickness Chart Of A182 UNS S32760 Flange
- Weight of SA182 F55 RTJ Flange
- Pressure Rating Chart Of Super Duplex F55 Flange
- ASTM A182 F55 SORF Flanges Equivalent Standards
- ASTM A182 F55 Slip On Flanges Chemical Compositions
- A182 F55 Threaded Flanges Physical Properties
- A182 F55 Plate Flanges Mechanical Properties
- What Are The Differences Between ASTM A182 F55 and ASTM A182 F53 ?
- What Is The ASTM A182 F55 Flange Heat Treatment Procedure?
- Faces Types Of A182 Gr F55 Flanges
- What Are the Advantage Of Using ASTM A182 F55 Over Carbon Steel Flanges?
ASTM A182 F55 UNS S32760 Flange
UNS S32760 Flange
SA 182 F55 S32760 Blind Flanges
ASTM A182 F55 flanges are manufactured in India by leading suppliers, offering high-quality products to meet industry standards. ASTM A182 F55 Flanges Supplier in India provides premium-grade fasteners with superior strength. These flanges are delivered to various international markets, including the United States, South Africa, UAE, Kenya, Italy, Oman, Spain, and Qatar.
Stockist of ASTM A182 Grade F55 Super Duplex Flange With Schedule 10 - Schedule 150 Thickness, Check Specification
Size
- NPS: ½" to 48"
- PN 2.5 – PN 400
- 15NB – 1500NB
Features
- Toughness Improved
- Eco-Friendly
- Highly Durable
- High Heat Resistant
Applications
- Water Filtration Plants
- Infrastructure
- Automotive, Aerospace
- paper Industry
Thickness
- SCH 10/ 20/ 40
- SCH 120/ 140
- SCH 160/ 180
- SCH 60/ 80/ 100
Surface Coating
- Cadmium, Galvanized
- Black Oxide
- Teflon, Xylan, Zinc
- Others Upon Request
Disadvantages
- Higher Weight
- Not Compatible With Some High Temperatures
- Corrosion In Mircobial Conditions
Pressure
- CL 300 - 400
- CL 600 - 900
- CL 1500 - 2500
- CL 125 - 150
Finishing
- Spiral Serrated
- Concentric Serrated
- Stock Finish
- Mirror , Serrated Finish
- Cold Water Finish
- Smooth Finish
Testing Methods
- Hardness test
- Tensile test
- PMI test
- Impact test
Threads type
- MPT/ BSPT
- FPT
- BSP,NPT
- BSPP, MNPT
Production process
- Casting
- Plating
- Forging
- Machining
Connections
- Welding
- Threaded
Packaging Methods
- Wooden
- Plastic
- Carton
Standard
- ASME/ANSI B16.48
- ASME/ANSI B16.36
- ASME/ANSI B16.47
- ASME/ANSI B16.5
Certification
- NACE MR0175
- MTC BS EN 10204 3.1/ 3.2
- Third Party Inspection
- 100% Radiography Test
ASTM A182 Grade F55 RTJ Flange
A182 F55 SDSS BLRF Flange
A182 F55 Reducing Flange
ASTM A182 F55 Raised Face Flange
ASTM A182 Grade F55 SORF Flange
A182 UNS S32760 WNRF Flange
ASTM A182 F55 LWNRF Flange
ASTM A182 UNS S32760 Orifice Flange
SA182F55 Slip On Flange
ASTM A182F55 Socket Weld Flange
A182 F55 Threaded Flange
SA182 F55 Square Flange
A182 UNS S32760 Forged Flange
ASTM A182 S32760 Plate Flange
A182 Gr F55 Blind Flange
SA182 F55 Weld Neck Flange
Get ASME B16.5 SA182 F55 UNS S32760 Flange With Dimensionally Correct in mm, Refer Size & Weight Char
| Nominal Size Pipe(Inches) | Number of Bolt Holes | Hole Size (Inches) | Flange OD (Inches) | Bolt Circle Diameter (Inches) | Nominal Bore (Inches) | Thickness (Inches) |
|---|---|---|---|---|---|---|
| 1/2″ | 4 | 0.56" | 3.00″ | 2.50″ | 1/2″ | 0.50" |
| 8″ | 8 | 1.00" | 11.00″ | 9.00″ | 8″ | 0.75" |
| 1″ | 4 | 0.56" | 4.00″ | 3.50″ | 1″ | 0.56" |
| 3/4″ | 4 | 0.56" | 3.50″ | 3.00″ | 3/4″ | 0.50" |
| 3″ | 8 | 0.75" | 7.00″ | 6.00″ | 3″ | 0.75" |
| 1 1/2″ | 4 | 0.75" | 5.00″ | 4.00″ | 1 1/2″ | 0.56" |
| 6″ | 8 | 1.00" | 9.50″ | 8.00″ | 6″ | 0.75" |
| 2″ | 4 | 0.75" | 5.50″ | 4.50″ | 2″ | 0.56" |
| 12″ | 12 | 1.25" | 14.00″ | 11.00″ | 12″ | 1.00" |
| 10″ | 8 | 1.00" | 12.50″ | 10.00″ | 10″ | 1.00" |
| 4″ | 8 | 0.75" | 8.00″ | 7.00″ | 4″ | 0.75" |
| Normal Pipe Size | Schedule 40 | Schedule 20 |
|---|---|---|
| ½ | 0.109 | … |
| 14 | 0.438 | 0.312 |
| ¾ | 0.113 | … |
| 12 | 0.406 | 0.25 |
| 1 | 0.133 | … |
| 10 | 0.365 | 0.25 |
| 18 | 0.562 | 0.312 |
| 4 | 0.237 | – |
| 1 ¼ | 0.14 | … |
| 24 | 0.688 | 0.375 |
| 2 ½ | 0.203 | … |
| 16 | 0.5 | 0.312 |
| 5 | 0.258 | – |
| 6 | 0.28 | – |
| 3 | 0.216 | – |
| 3 ½ | 0.226 | – |
| 8 | 0.322 | 0.25 |
| 20 | 0.594 | 0.375 |
| 1 ½ | 0.145 | … |
| 2 | 0.154 | … |
| Bolt Standards | Class | Bolt Size | Dia | Bolt Hole Dia | Bolt Circle Dia | Number of Bolts |
|---|---|---|---|---|---|---|
| ANSI B16.5 | ANSI 300 | 13 | 95 | 16 | 67 | 4 |
| ANSI 150 | 13 | 89 | 16 | 60 | 4 | |
| ANSI 600 | 13 | 95 | 16 | 67 | 4 | |
| ANSI 900 | 19 | 121 | 22 | 83 | 4 | |
| ANSI 1500 | 19 | 121 | 22 | 83 | 4 | |
| ISO 7005 (DIN) | PN10 | M12 | 95 | 14 | 65 | 4 |
| PN6 | M10 | 80 | 11 | 55 | 4 | |
| PN20 | M14 | 90 | 16 | 60.5 | 4 | |
| PN16 | M12 | 95 | 14 | 65 | 4 | |
| PN25 | M12 | 95 | 14 | 65 | 4 | |
| PN40 | M12 | 95 | 14 | 65 | 4 | |
| AS 2129 | Table C | 13 | 95 | 14 | 67 | 4 |
| Table F | 13 | 95 | 14 | 67 | 4 | |
| Table D | 13 | 95 | 14 | 67 | 4 | |
| Table E | 13 | 95 | 14 | 67 | 4 | |
| Table H | 16 | 114 | 17 | 83 | 4 | |
| Table J | 16 | 114 | 17 | 83 | 4 | |
| AS4087 | PN14 | M12 | 95 | 14 | 67 | 4 |
| Temperature °C | 600 | 400 | 1500 | 150 | 900 | 300 | 2500 |
|---|---|---|---|---|---|---|---|
| 400 | 69.4 | 46.3 | 173.6 | 6.5 | 104.2 | 34.7 | 289.3 |
| 425 | 57.5 | 38.4 | 143.8 | 5.5 | 86.3 | 28.8 | 239.7 |
| 500 | 23.5 | 15.7 | 58.8 | 2.8 | 35.3 | 11.8 | 97.9 |
| 100 | 93.2 | 62.1 | 233.0 | 17.7 | 139.8 | 46.6 | 388.3 |
| 300 | 79.6 | 53.1 | 199.1 | 10.2 | 119.5 | 39.8 | 331.8 |
| -29 ~ 38 | 102.1 | 68.1 | 255.3 | 19.6 | 153.2 | 51.1 | 425.5 |
| 200 | 87.6 | 58.4 | 219.0 | 13.8 | 131.4 | 43.8 | 365.0 |
| 450 | 46.0 | 30.7 | 115.0 | 4.6 | 69.0 | 23.0 | 191.7 |
| 325 | 77.4 | 51.6 | 193.6 | 9.3 | 116.1 | 38.7 | 322.6 |
| 538 | 11.8 | 7.9 | 29.5 | 1.4 | 17.7 | 5.9 | 49.2 |
| 475 | 34.9 | 23.2 | 87.2 | 3.7 | 52.3 | 17.4 | 145.3 |
| 350 | 75.1 | 50.1 | 187.8 | 8.4 | 112.7 | 37.6 | 313.0 |
| 150 | 90.2 | 60.1 | 225.4 | 15.8 | 135.2 | 45.1 | 375.6 |
| 250 | 83.9 | 55.9 | 209.7 | 12.1 | 125.8 | 41.9 | 349.5 |
| 50 | 100.2 | 66.8 | 250.6 | 19.2 | 150.4 | 50.1 | 417.7 |
| 375 | 72.7 | 48.5 | 181.8 | 7.4 | 109.1 | 36.4 | 303.1 |
Exporter of SA182 F55 RTJ Flange & A182 Gr F55 Reducing Flanges According to International Standard Refer Equivalent Chart
EN
X2CrNiMoCuWN25-7-4
WERKSTOFF NR.
1.4501
UNS
S32760
Get UNS S32760 Slip on Flange & Super Duplex F55 Blind Flange with Higher Tensil Strength, Check Mechanical Properties
ASTM A182 F55 Flanges Manufacturer in India offers great physical properties of fastners
| Property | Value |
|---|---|
| Poisson's Ratio | 0.3 |
| Electrical Resistivity | 0.85 µΩ·m |
| Density | 7.8 g/cm³ |
| Elastic Modulus | 200 GPa |
| Specific Heat Capacity | 460 J/kg·K |
| Thermal Conductivity | 19 W/m·K |
Melting Point
2460°F
Tensile Strength
750 - 895 MPa
Yield Strength
550 Mpa
Elongation
25%
| Property | F55 | F53 |
|---|---|---|
| Strength | Higher strength in extreme conditions | Lower Strength in Extreme Conditions |
| Mo Content | ~3% Higher | ~2.5% Lower |
| Cost | More Costly | More cost-Friendly |
| Resistance To Corrosion | Works Better in Chloride Environments | Less Than F55 |
| Step | Details |
|---|---|
| Cooling | Rapid Cooling In Air or Water |
| Annealing | Heated At 1040°C - 1100°C |
| Post-Treatment | Passivation and Optional Pickling |
ASTM A182 F55 Flanges Manufacturer in India provides a wide Range of selection for Faces
| Faces Types | Marking |
|---|---|
| Male Female Face | M&F |
| Raised Face | RF |
| Lap Joint Face | LJRF |
| Male Female Face | M&F |
| Ring Type Joint | RTJ |
| Tongue Groove Face | T & G |
| Advantages | Carbon Steel Flanges | ASTM A182 F55 Flanges |
|---|---|---|
| Fatigue Resistant | Lower fatigue resistance | Better fatigue resistance |
| Strength | Lower strength | Higher strength |
| Corrosion Resistance | Prone to corrosion | Excellent corrosion resistant |
| Life Span | Short life | Long life |