Titanium Flanges Manufacturers

Titanium Grade 2 Flanges, Titanium Pipe Flanges Suppliers

Titanium Exhaust Flanges Manufacturers India, Titanium Blind Flanges Exporter in Mumbai

Titanium Pipe Flanges
Titanium Flanges
Titanium Exhaust Flanges
Titanium Exhaust Flanges
Titanium Blind Flanges
Titanium Blind Flanges

Regal Sales Corporation is one of the recommended manufacturer Of Titanium Flanges In India. Our Ti Flanges is a titanium alloy formulated for primary forming into wrought products. Type Titanium Lap Joint Flanges is the common industry flange. Type Titanium Blind Flanges is sometimes referred to good resistance against water. Titanium Plate Flanges offers 20 to 50% higher strength than commercially pure grades, but is more formable and weldable than other flange. Titanium Slip On Flange (SORF) is principally used as tubing in aircraft engine hydraulic systems, for high strength corrosion resisting applications such as golf club shafts, tennis rackets, bicycle frames. Titanium Flat Face Flange it is important part of titanium flange family.

Titanium Spectacle Blind Flange and Titanium Threaded Flange is forged at 1549°C. Titanium Weld Neck Flange is annealed at 1604°C.

Our Titanium Blank Flange cooled at temperatures ranging to prevent thermal cracking. We believe in customers satisfaction with our product and quality of product which we gonna supply to our customers. We Are most versatile and widely supplier of Titanium RF Flanges. The benefits of our flanges include a long service life that will retain an attractive, clean finish with low maintenance cost.

Titanium Flanges Price, Titanium Flange Specification.

Titanium Flange Standard, Titanium Gr 2 Flange Pressure Rating.

Titanium Flanges manufacturers in India

Regal Sales Corporation is manufacturer of Titanium Flanges, forged, ASTM B381 Grade 5 (dual marked and certified), ASME B16.5, annealed and fully machined, raised face, smooth finish (125-250 RMS / 3.2-6.3µM) to MSS-SP6, SS Grade 2 Flange hardness as per NACE MR0175 and tested to ASTM A262 E and PMI.

ASTM B381 Grade Grade 5 Orifice Flange


ASTM B381 Grade Grade 5 Orifice Flange

SA 182 Grade 5 Blank Flange


SA 182 Grade 5 Blank Flange

ASTM B381 Grade 5 Anchor Flange


ASTM B381 Grade 5 Anchor Flange

ASTM B381 Grade 5 Screw Flange


ASTM B381 Grade 5 Screw Flange

Titanium Flanges Specification and Standards

Specifications Titanium Flanges
ASME B16.5 Titanium Flange size range 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Titanium Flanges Standards ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges.
Titanium Flange Standard ANSI Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Titanium Flange Standard DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
Titanium Flange Standard JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
Titanium Flange Standard UNI 6Bar 10Bar 16Bar 25Bar 40Bar
Titanium Flange Standard EN 6Bar 10Bar 16Bar 25Bar 40Bar
Main Types Forged / Threaded / Screwed / Plate
Flange supporting material Gasket, Ring Joint, Flange Bolts
Titanium Pipe Flanges Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Most common types of Titanium Flanges
  • Weld Neck Ring Flange (WNRF), Titanium
  • Slip-On Ring Flange (SORF), Titanium
  • Blind Ring Flange (BLRF), Titanium
  • Socket Weld Ring Flange (SWRF), Titanium
  • Threaded Ring Flange, Titanium
  • Lap Joint Ring Flange (LJRF), Titanium
  • Ring Type Joint Flange (RTJF), Titanium
Production technique
  • Forged, Heat treated and machined
Connect Type/ Flange Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

Titanium Threaded Flange, Socketweld Flange, Slip-On Flange, Blind Flange, Weld Neck Flange

Test Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Equipment Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Origin Indian / West Europe / Japan / USA / Korean
Specialized manufacturer of
  • Rtj Flange
  • Pn16 Flange
  • DIN 2566 pn16
  • DIN 2566 en 1092 1
  • DIN 2566 pn10
  • Titanium Large Diameter Flange
  • Titanium Sorf Flange
  • Titanium Blind Flanges
  • Titanium Table Flanges
  • Titanium Weld Neck Flanges
  • Titanium Threaded Flanges
  • Titanium Slip-On Flanges
  • Titanium Socketweld Flanges
  • Titanium Plate Flanges
  • Titanium Lap Joint Flanges
  • Titanium Loose Flanges
  • Titanium Orifice Flanges
  • Titanium AS 4087 Water Flanges
Titanium Flanges Standard

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

  • B.S: BS4504 , BS3293, BS1560, BS10
  • AS 2129: Table D; Table E; Table H
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • American standard (ANSI)
  • German (DIN)
  • British standard (BS)
  • Any other specilised flanges
  • DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
  • The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
Key markets and industries for Titanium Flanges
  • Bitumen upgraders.
  • Heavy oil refineries.
  • Nuclear power (mostly seamless).
  • Petrochemicals and acids.
Export to Ireland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc
Titanium Flanges Application
  • To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Titanium Pipe Flange Dimensions

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
  • ASME B1.20.1, Pipe Threads, General Purpose
  • ASME B16.1, Cast Iron Flanges and Flanged Fittings Classes 25, 125 and 250
  • ASME B16.5, Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24
  • ASME B16.11, Forged Fittings, Socket Welding and Threaded
  • ASME B16.25, Buttwelding Ends
  • ASME B16.36, Orifice Flanges
  • ASME B16.47, Large Diameter Steel Flanges NPS 26 Through NPS 60
  • ASME B31.1, Power Piping
  • ASME B31.3, Process Piping
  • ASME B46.1, Surface Texture (Surface Roughness, Waviness, and Lay)

Prestige quality Titanium Flanges manufacturers in India offer these Titanium Flanges in DIN, ISO, JIS or ANSI standard.

Ti Grade 2 Flanges Weight Chart

15mm (1/2") Titanium Flange Weight Chart

Standard Class Diameter Bolt Circle Diameter Number of Bolts Bolt Size Diameter of Bolt Hole
AS4087 Flanges PN14 Flanges 95 67 4 M12 14
AS 2129 Flange Table C Flanges 95 67 4 13 14
Table D Flanges 95 67 4 13 14
Table E Flanges 95 67 4 13 14
Table F Flanges 95 67 4 13 14
Table H Flanges 114 83 4 16 17
Table J Flanges 114 83 4 16 17
ANSI B16.5 Flanges ANSI 150 Flanges 89 60 4 13 16
ANSI 300 Flanges 95 67 4 13 16
ANSI 600 Flanges 95 67 4 13 16
ANSI 900 Flanges 121 83 4 19 22
ANSI 1500 Flanges 121 83 4 19 22
ISO 7005 (DIN) Flange PN6 Flanges 80 55 4 M10 11
PN10 Flanges 95 65 4 M12 14
PN16 Flanges 95 65 4 M12 14
PN20 Flanges 90 60.5 4 M14 16
PN25 Flanges 95 65 4 M12 14
PN40 Flanges 95 65 4 M12 14

Regal Sales Corporation is an ISO certified Titanium Flanges manufacturer & distributor in India

Regal Sales Corporation is a manufacturer and supplier of Titanium Flanges offering in all Ratings up to 2500#, built a distribution network with more then 65 countries globally.

ASTM B381 Grade 5 Pipe Flanges Ti Grade 2 Raised Face Slip On Flanges
ASTM B381 Grade 5 Exhaust Flanges ASME SB381 Grade 5 Slip On Plate Flanges
ASTM B381 Grade 5 Header Flanges Grade 2 Titanium Slip On Flanges
ASTM B381 Grade 5 Plate Flanges B381 Grade 5 Pipe Flanges
ASTM B381 Grade 5 Backing Flanges Ti Grade 2 Exhaust Flanges
ASTM B381 Grade 5 Tube Flanges ASME SB381 Grade 2 Header Flanges
ASTM B381 Grade 5 Stub End Flanges Ti Grade 2 Raised Face Weld Neck Flanges
ASTM B381 Grade 5 Shower Rod Flanges ASTM B381 Grade 5 Sae Flanges
ASTM B381 Grade 5 Slip On Flanges Grade 2 Titanium Weld Neck Flange
ASTM B381 Grade 5 Screwed Flanges ASTM B381 Grade 5 Clad Flanges
ASTM B381 Grade 5 Socket Weld Flanges ASTM B381 Grade 5 Titanium WNRF Flange
ASTM B381 Grade 5 Sbc Header Flanges Ti Grade 2 Raised Face Blind Flanges
ASTM B381 Grade 5 Split Flanges ASME SB381 Grade 5 Blind Flanges
ASTM B381 Grade 5 Slip-On Pipe Flanges Grade 2 Titanium Blind Flange
ASTM B381 Grade 5 Square Flanges ASTM B381 Grade 5 Ansi Flanges
Ansi 150 ASTM B381 Grade 5 Flanges ASTM B381 Grade 5 Titanium BLRF Flanges
ASTM B381 Grade 5 Blank Flanges Ti Grade 2 Orifice Flanges
ASTM B381 Grade 5 Bsp Flanges ASME SB381 Grade 5 Orifice Flanges
ASTM B381 Grade 5 Companion Flanges Grade 2 Titanium Orifice Flanges
ASTM B381 Grade 5 Class 150 Flanges ASTM B381 Grade 5 Duct Flanges
ASTM B381 Grade 5 Cover Flanges B381 Grade 2 Titanium Orifice Flanges
Custom ASTM B381 Grade 5 Flanges Ti Grade 2 Socket weld Flanges
Class 600 ASTM B381 Grade 5 Flanges ASME SB381 Grade 5 Socket weld Flanges
ASTM B381 Grade 5 Din Flanges Grade 2 Titanium Socket weld Flanges
Large Diameter ASTM B381 Grade 5 Flanges ASTM B381 Grade 5 SWRF Flanges
Table E ASTM B381 Grade 5 Flanges ASME B16.5 Grade 2 Titanium Socket weld Flanges
ASTM B381 Grade 5 Floor Flanges SS Grade 2 Threaded Flanges
ASTM B381 Grade 5 Forged Flanges ASME SB381 Grade 5 Threaded Flanges
Gaskets For ASTM B381 Grade 5 Flanges Grade 2 Titanium Threaded Flanges
ASTM B381 Grade 5 Handrail Flanges ASTM B381 Grade 5 Manifold Flanges
High Pressure ASTM B381 Grade 5 Flanges ASTM B381 Grade 5 Threaded Flanges
ASTM B381 Grade 5 Lap Joint Flanges ASTM B381 Titanium Grade 2 Threaded Flanges
ASTM B381 Grade 5 Long Weld Neck Flanges Ti Grade 2 Long weld Neck Flanges
ASTM B381 Grade 5 Metric Flanges ASME SB381 Grade 5 Long weld Neck Flanges
ASTM B381 Grade 5 Muffler Flanges Grade 2 Titanium Long weld Neck Flanges
ASTM B381 Grade 5 Pump Flanges ASTM B381 Grade 5 Orifice Flanges
ASTM B381 Grade 5 Pressed Flanges Ti Grade 2 Ring Type Joint Flanges
ASTM B381 Grade 5 Puddle Flanges ASME SB381 Grade 5 Ring Type Joint Flange
ASTM B381 Grade 5 Pad Flanges Grade 2 Titanium RTJ Flanges
ASTM B381 Grade 5 Reducing Flanges Ti RTJ Flanges
ASTM B381 Grade 5 Raised Face Flanges ASTM B381 Grade 5 RTJ Flanges
ASTM B381 Grade 5 Ring Flanges BS4504 Titanium Grade 2 RTJ Flanges
ASTM B381 Grade 5 Threaded Reducing Flanges Ti Grade 2 Reducing Flanges
ASTM B381 Grade 5 Wnrf Flanges ASME SB381 Grade 5 Reducing Flanges
ASTM B381 Grade 5 Split Flanges Grade 2 Titanium Reducing Flange
ASTM B381 Grade 5 Turbo Flanges ASTM B381 Grade 5 Forged Flanges
ASTM B381 Grade 5 Vacuum Flanges ASTM B381 Grade 5 Reducing Flange
ASTM B381 Titanium Grade 2 Reducing Flanges Grade 2 Titanium Forged Flange

Manufacturing Titanium Flanges in India, Regal Sales Corporation holds a wide range of Titanium Flanges in stock for immediate despatch throughout India & globally.

Special offer on:

Flange Schedule/Class Pipe Size - Pipe Flanges Flange Connection Type Flange Material Max. Pressure
ASME B16.5 Class 150 1/2" FNPT Titanium 150 psi
ASME B16.5 Class 150 1/2" Socket Weld Forged Titanium 275 psi
ASME B16.5 Class 150 1/2" Welded Titanium 150 psi
ASME B16.5 Class 150 3/4" FNPT Titanium 150 psi
ASME B16.5 Class 150 3/4" Socket Weld Forged Titanium 275 psi
ASME B16.5 Class 150 1-1/4" Socket Weld Forged Titanium 275 psi
ASME B16.5 Class 150 1-1/2" Socket Weld Forged Titanium 275 psi
ASME B16.5 Class 150 2" FNPT Titanium 150 psi
ASME B16.5 Class 150 2" Socket Weld Forged Titanium 275 psi
ASME B16.5 Class 150 2-1/2" Socket Weld Forged Titanium 275 psi
ASME B16.5 Class 150 3" Socket Weld Forged Titanium 275 psi
ASME B16.5 Class 150 4" FNPT Titanium 150 psi
ASME B16.5 Class 150 4" Socket Weld Forged Titanium 275 psi
ASME B16.5 Class 300 1/2" Slip On Forged Titanium 720 psi
ASME B16.5 Class 300 1/2" Slip On Forged Titanium 720 psi
ASME B16.5 Class 300 1" Slip On Forged Titanium 720 psi
ASME B16.5 Class 300 1" Slip On Forged Titanium 720 psi
ASME B16.5 Class 300 1-1/4" FNPT Forged Titanium 720 psi
ASME B16.5 Class 300 1-1/4" Slip On Forged Titanium 720 psi
ASME B16.5 Class 300 1-1/2" Slip On Forged Titanium 720 psi
ASME B16.5 Class 300 1-1/2" Slip On Forged Titanium 720 psi
ASME B16.5 Class 300 2" Slip On Forged Titanium 720 psi
ASME B16.5 Class 300 2" Slip On Forged Titanium 720 psi
ASME B16.5 Class 300 2-1/2" Slip On Forged Titanium 720 psi
ASME B16.5 Class 300 2-1/2" Slip On Forged Titanium 720 psi
ASME B16.5 Class 300 3" Slip On Forged Titanium 720 psi
ASME B16.5 Class 300 3" Slip On Forged Titanium 720 psi
ASME B16.5 Class 300 4" Slip On Forged Titanium 720 psi
ASME B16.5 Class 300 4" Slip On Forged Titanium 720 psi

Ti Grade 2 Forged and Plate Flange

Ti Grade 2 Flange
ASTM B381 Ti Grade 2 Slip-On Flange ASTM B381 Ti Grade 2 Threaded Flange
ASTM B381 Ti Grade 2 Weld Neck Flange ASTM B381 Ti Grade 2 Socket Weld Flange
ASTM B381 Ti Grade 2 Blind Flange ASTM B381 Ti Grade 2 Reducing Flange
ASTM B381 Ti Grade 2 Lap Joint Flange ASTM B381 Ti Grade 2 Plate Flange
ASTM B381 Ti Grade 2 Orifice Flange ASTM B381 Ti Grade 2 Forged Flange
ASTM B381 Ti Grade 2 Ring Type Joint Flange ASTM B381 Ti Grade 2 Square Flange

Titanium Pipe Flange Pressure Ratings

Titanium Flanges Flange Standards / Types and Pressure Class :

ASME/ANSI B 16.36 Welding Neck Flange, Slip on Flange, Threaded Flange
PRESSURE CLASS 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.5 Welding Neck Flange, Slip on Flange, Blind Flange, High Hub Blind Flange, Socket Weld Flange, Lap Joint Flange, Threaded Flange, Ring Type Joint Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47 Welding Neck Flange, Blind Flange [Series A & B]
PRESSURE CLASS 75, 150, 300, 400, 600, 900
BS 4504 SEC 3.1 Welding Neck Flange, Hubbed Slip on Flange, Hubbed Threaded Flange, Lapped Pipe End Flange, Plate Flange, Loose Plate Flange, Loose Plate With Weld Neck Flange, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 40
BS 4504[PART 1] Welding Neck Flange, Hubbed Slip-On Hubbed Threaded, Plate Flange, Loose Plate With Weld On Plate Collar, Blank Flange
PRESSURE CLASS PN 2.5 TO PN 400
BS 1560 BOSS Welding Neck Flange, Socket Welding Flange, Slip-On Flange, Blind Flange, Screwed Boss Flange, Lapped Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
BS10 Welding Neck Flange, Plate Slip-On Flange, Screwed Boss Flange, Slip-On Boss Flange, Blind Flange
TABLE D, E, F, H
DIN FLANGES DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS PN 6 TO PN 100

Titanium Flanges Chemical Composition

Grade Ti C Fe H N O Al V
Ti Grade2 99.2 min 0.1 max 0.3 max 0.015 max 0.03 max 0.25 max
Ti Grade5 90 min 0.25 max 0.2 max 6 min 4 min

Titanium Flanges mechanical properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr. 2 4.5 g/cm3 1665 °C (3030 °F) Psi – 49900 , MPa – 344 Psi – 39900 , MPa – 275 20 %
Titanium Gr. 5 4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 %

Equivalent Grades for Titanium Flanges

STANDARD WERKSTOFF NR. UNS
Titanium Gr. 2 3.7035 R50400
Titanium Gr. 5 3.7165 N56400

Titanium Flanges useful information

Click on below links for Ti Grade 2 flanges dimensions

Find a Titanium Flanges distributor in your location:

Regal Sales Corporation is a Govt. approved certified Titanium Flanges exporter in India. All of our Titanium Flanges are manufactured and tested to international standards, and specifications as per DIN, JIS, EN, ASTM etc. Regal Sales Corporation is known as a trusted vendor as a Titanium Flanges distributor & dealer in your country. We have huge stock in Asia, GCC, Gulf, Middle east, UK to supply with over 28 countries, we provide after sales service and fast delivery.

MIDDLE EAST

  • Saudi Arabia (KSA)
  • UAE
  • Iran
  • Iraq
  • Jordan
  • Qatar
  • Bahrain
  • Oman
  • Kuwait
  • Turkey
  • Yemen
  • Syria
  • Cyprus

AFRICA

  • South Africa
  • Nigeria
  • Algeria
  • Angola
  • Libya
  • Egypt
  • Gabon
  • Sudan
  • Equatorial Guinea
  • The Republic Of Congo
NORTH AMERICA
  • USA
  • Canada
  • Mexico
  • Panama
  • Costa Rica
  • Puerto Rica
  • Trinidad And Tobago
  • Jamaica
  • Bahamas
  • Denmark

EUROPE

  • UK
  • Netherland
  • Russia
  • Norway
  • Germany
  • France
  • Italy
  • Spain
  • Ukraine
  • Belgium
  • Greece
  • Hungary
  • Albania
  • Austria
  • Finland
  • Ireland
  • Croatia
  • Slovenia
  • Malta
  • Switzerland
  • Slovakia
  • Czech Republic
  • Portugal

ASIA

  • Malaysia
  • India
  • Taiwan
  • Cambodia
  • Singapore
  • Indonesia
  • Thailand
  • Vietnam
  • South Korea
  • Japan
  • Sri Lanka
  • Maldives
  • Bangladesh
  • Mayanmar
SOUTH AMERICA
  • Venezuela
  • Argentina
  • Bolivia
  • Colombia
  • Ecuador
  • Guyana
  • Paraguay
  • Uruguay
  • Brazil
  • Chile
Stock an extensive range of Titanium Flanges, Titanium Flanges suppliers in Mumbai, India
Manufacting high-class Titanium Flanges in India, offer lowest price of Titanium Flanges, contact Titanium Flanges manufacturers in Mumbai, Pune & Chennai - India