Titanium Grade 5 Flanges
Great Manufacturer of ASTM B381 Titanium Gr 5 Blind Flanges in India, With Custom Sizes
Table of Content
- What is Titanium Grade 5 Flanges ?
- Titanium Gr.5 Reducing Flange Specification
- Most Common Types of Ti Gr 5 Socket Weld Flange
- Dimensions Chart Of Titanium DIN 3.7165 Flanges
- Pressure Rating Of Titanium Grade 5 Flanges
- Size Chart Of Gr5 Ti. Alloy Slip-On Flanges
- Titanium UNS N56400 Threaded Flanges Size Chart
- Weight Chart Of ASME SB381 Titanium Gr 5 Flanges
- Price List Of Gr 5 Titanium Flanges
- Equivalent Material Grade of Titanium Gr 5 Orifice Flanger
- Chemical Composition of Grade 5 Ti LWNRF Flange
- Gr 5 Titanium Socket Weld Flange Physical Properties
- Mechanical Properties Of Gr 5 Titanium Alloy Pipe Flanges
- What is the Difference Between Titanium Grade 5 Flanges and Titanium Grade 7 Flanges ?
- What is the Formability of Titanium Grade 5 ?
- Can Titanium Grade 5 Be Anodized ?
- What is the Impact of Heat Treatment on Titanium Grade 5 ?
Get Titanium UNS N56400 Pipe Flanges & ASTM B564 Titanium Gr-5 Threaded Flanges With Size Ranging From 1/2″NB TO 60″NB , Check Specification
Titanium Gr.5 Reducing Flanges Sizes
- NPS: ½" 60 "
- DN15 ~ DN1500
- 15NB – 1500NB
Features
- Lightweight
- Low Creep Rate
- Environmental Resistance
- High Strength
- Biocompatibility
Advantages
- Non-Magnetic
- Ease of Fabrication
- Resistance to Biofouling
- Environmental Resistance
International standards
- ASME B16.47
- ASME B16.5
- ASME B16.36
- ASME B16.48
Wall Thickness
- SCH 120/ 140
- SCH 160/ 180
- SCH 60/ 80/ 100
- SCH 10/ 20/ 40
Disadvantages
- Susceptibility to Galling
- Difficult to Weld
- High Cost
- Difficult Machining and Fabrication
Surface Finish
- Brushed or Satin Finish
- Ground Finish
- Mill Finish
- Bead Blasted Finish
- Shot Peened Finish
Logistics
- By Sea
- By Air
- Oman = 5 to 6 days
- Qatar = 7 day
- UAE = 6 to 7 day
- Bahrain = 9 to 10 days
Available Packaging
- Plastic Shrink Wrap
- Wooden Crates
- Custom Foam Boxes
- Shrink-Wrapped Pallets
Sealing Types
- Flat Face Seals
- Cam Profile Gaskets
- Envelope Gaskets
- Flange Sealants
Pressure class
- Class 1500 To 2500
- Class 600 To 900
- Class 125 To 150
- Class 300 To 400
Types of Threading
- NPT
- FPT
- MPT
- MNPT (Male)
- BSPP (Male & female)
ASME SB381 Titanium Gr 5 Plate Flange
Gr 5 Alloy Socket Weld Flange
Gr 5 Titanium Threaded Flange
Gr 5 Titanium Alloy Reducing Flange
Titanium Grade 5 Orifice Flange
Titanium UNS N56400 Slip on Flange
Titanium Gr 5 LWNRF Flange
Grade 5 Ti Blind Flange
Titanium Grade 5 Lap Joint Flange
Ti Gr 5 WNRF Flange
Titanium DIN 3.7165 Forged Flange
Gr5 Ti. Alloy Pipe Flanges
Titanium UNS N56400 Raised Face Flange
ASME B16.5 Titanium Gr 5 BLRF Flange
Titanium Gr 5 RTJ Flange
ANSI B16.5 Ti Alloy Gr 5 Weld Neck Flange
Exporter of Grade 5 Titanium Slip On Flanges & Ti gr 5 SWRF Flanges With NPT, BSP & UNS Thread Type, Check Dimension Size Chart
Titanium Grade 5 Flanges Manufacturer in India offers a wide Range of Dimensions
| Dia | Bolt Circle Dia | Bore | Bolt Holes | Bolt Dia | Flange Thick | Nominal Pipe Size | Weight in lbs./kg. | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Slip-On | Blind | |||||||||||||||
| in | mm | mm | in | in | mm | # | mm | in | mm | in | mm | in | kg | lb | lb | kg |
| 4.25 | 107.95 | 79.38 | 3.13 | 1.36 | 34.54 | 4 | 12.70 | 0.50 | 9.53 | 0.38 | 25 | 1″ | 0.32 | 0.70 | 0.79 | 0.36 |
| 7.00 | 177.80 | 139.70 | 5.50 | 2.94 | 74.68 | 4 | 15.88 | 0.63 | 12.70 | 0.50 | 65 | 2-1/2″ | 1.11 | 2.44 | 2.99 | 1.36 |
| 13.50 | 342.90 | 298.45 | 11.75 | 8.72 | 221.49 | 8 | 19.05 | 0.75 | 15.88 | 0.63 | 150 | 6″ | 3.63 | 8.01 | 14.00 | 6.35 |
| 5.00 | 127.00 | 98.43 | 3.88 | 1.95 | 49.53 | 4 | 12.70 | 0.50 | 9.53 | 0.38 | 40 | 1-1/2″ | 0.43 | 0.94 | 1.12 | 0.51 |
| 7.50 | 190.50 | 152.40 | 6.00 | 3.57 | 90.68 | 4 | 15.88 | 0.63 | 12.70 | 0.50 | 80 | 3″ | 1.20 | 2.64 | 3.46 | 1.57 |
| 9.00 | 228.60 | 190.50 | 7.50 | 4.57 | 116.08 | 8 | 15.88 | 0.63 | 12.70 | 0.50 | 90 | 3-1/2″ | 1.68 | 3.70 | 4.90 | 2.22 |
| 6.00 | 152.40 | 120.65 | 4.75 | 2.44 | 61.98 | 4 | 15.88 | 0.63 | 9.53 | 0.38 | 50 | 2″ | 0.60 | 1.33 | 1.62 | 0.73 |
| 10.00 | 254.00 | 215.90 | 8.50 | 5.66 | 143.76 | 8 | 19.05 | 0.75 | 15.88 | 0.63 | 100 | 4″ | 2.24 | 4.95 | 7.50 | 3.40 |
| 4.63 | 117.48 | 88.90 | 3.50 | 1.70 | 43.18 | 4 | 12.70 | 0.50 | 9.53 | 0.38 | 32 | 1-1/4″ | 0.37 | 0.81 | 0.95 | 0.43 |
| 11.00 | 279.40 | 241.30 | 9.50 | 6.72 | 170.69 | 8 | 19.05 | 0.75 | 15.88 | 0.63 | 125 | 5″ | 2.53 | 5.58 | 9.20 | 4.17 |
| 3.88 | 98.43 | 69.85 | 2.75 | 1.09 | 27.69 | 4 | 12.70 | 0.50 | 9.53 | 0.38 | 20 | 3/4″ | 0.27 | 0.59 | 0.65 | 0.29 |
| 16.00 | 406.40 | 361.95 | 14.25 | 10.88 | 276.35 | 12 | 22.23 | 0.88 | 19.05 | 0.75 | 200 | 8″ | 5.44 | 12.00 | 24.50 | 11.11 |
| 3.50 | 88.90 | 60.33 | 2.38 | 0.88 | 22.35 | 4 | 12.70 | 0.50 | 9.53 | 0.38 | 15 | 1/2″ | 0.22 | 0.48 | 0.51 | 0.23 |
| 19.00 | 482.60 | 431.80 | 17.00 | 12.88 | 327.15 | 12 | 22.23 | 0.88 | 19.05 | 0.75 | 250 | 10″ | 7.94 | 17.50 | 33.50 | 15.19 |
Titanium Grade 5 Flanges Manufacturer in India provides flanges with pressure ratings ranging from 150 to 2500 PSI
| ASME | Pressure Temp Ratings For Ti Gr 5 Flanges | ||||||
|---|---|---|---|---|---|---|---|
| Temp °F | Class 1500 | Class 600 | Class 2500 | Class 400 | Class 300 | Class 900 | Class 150 |
| 900 | 1945 | 780 | 3240 | 520 | 390 | 1165 | 50 |
| 1500 | 135 | 55 | 230 | 35 | 25 | 80 | 10 |
| 650 | 2150 | 860 | 3580 | 575 | 430 | 1290 | 125 |
| 1150 | 995 | 400 | 1655 | 265 | 200 | 595 | 20 |
| 300 | 2700 | 1080 | 4500 | 720 | 540 | 1620 | 205 |
| 1000 | 1605 | 640 | 2675 | 430 | 320 | 965 | 20 |
| 700 | 2125 | 850 | 3540 | 565 | 425 | 1275 | 110 |
| 1400 | 240 | 95 | 400 | 65 | 50 | 145 | 20 |
| 1300 | 430 | 170 | 715 | 115 | 85 | 255 | 20 |
| 400 | 2485 | 995 | 4140 | 660 | 495 | 1490 | 190 |
| 1250 | 565 | 225 | 945 | 150 | 115 | 340 | 20 |
| 600 | 2185 | 875 | 3640 | 580 | 435 | 1310 | 140 |
| 1100 | 1285 | 515 | 2145 | 345 | 255 | 770 | 20 |
| 750 | 2075 | 830 | 3460 | 555 | 415 | 1245 | 95 |
| 1050 | 1545 | 615 | 2570 | 410 | 310 | 925 | 20 |
| 950 | 1910 | 765 | 3180 | 510 | 380 | 1145 | 35 |
| 1200 | 770 | 310 | 1285 | 205 | 155 | 465 | 20 |
| 850 | 1980 | 790 | 3300 | 530 | 395 | 1190 | 65 |
| 500 | 2330 | 930 | 3880 | 620 | 465 | 1395 | 170 |
| 1350 | 310 | 125 | 515 | 80 | 60 | 185 | 20 |
| 800 | 2015 | 805 | 3360 | 540 | 405 | 1210 | 80 |
| 200 | 3000 | 1200 | 5000 | 800 | 600 | 1800 | 230 |
| 1450 | 170 | 70 | 285 | 45 | 35 | 105 | 15 |
| -20 to 100 | 3600 | 1440 | 6000 | 960 | 720 | 2160 | 275 |
| Nominal Size (Inches) | Flange Thick (t) | Bore Dia (ID) | Bolt Hole Size (Inches) | No. of Bolt Holes | Outside Dia (OD) | Bolt Circle Dia (BCD) |
|---|---|---|---|---|---|---|
| 6" | 1.250" | 4.000" | 0.875" | 8 | 9.750" | 8.500" |
| 2" | 0.750" | 1.750" | 0.625" | 4 | 5.750" | 4.500" |
| 1" | 0.625" | 1.125" | 0.500" | 4 | 4.250" | 3.500" |
| 4" | 1.000" | 3.125" | 0.750" | 8 | 7.750" | 6.500" |
| 1/2" | 0.500" | 0.750" | 0.375" | 4 | 3.250" | 2.500" |
| Nominal Size (Inches) | Bolt Circle Dia (BCD) | Outside Dia (OD) | Flange Thick (t) | No. of Bolt Holes | Bore Dia (ID) | Bolt Hole Size (Inches) |
|---|---|---|---|---|---|---|
| 2" | 4.500" | 6.000" | 0.750" | 4 | 1.750" | 0.625" |
| 6" | 8.500" | 10.000" | 1.250" | 8 | 4.000" | 0.875" |
| 1" | 3.500" | 4.500" | 0.625" | 4 | 1.125" | 0.500" |
| 4" | 6.500" | 8.000" | 1.000" | 8 | 3.125" | 0.750" |
| 1/2" | 2.500" | 3.500" | 0.500" | 4 | 0.750" | 0.375" |
Stockist of Ti. Alloy Gr 5 Socket Weld Flanges & Gr 5 Titanium Alloy Flange in Mumbai Used in Power Generation,Petrochemicals,& Gas Processing, Refer Weight Chart
| Standards | Class | Dia | Bolt Circle Dia | No. of Bolts | Bolt Size | Dia of Bolt Hole |
|---|---|---|---|---|---|---|
| AS 2129 Flanges | Table F Flanges | 280 | 235 | 8 | 19 | 22 |
| Table J Flanges | 280 | 235 | 8 | 22 | 26 | |
| Table D Flanges | 255 | 210 | 8 | 16 | 18 | |
| Table H Flanges | 280 | 235 | 8 | 19 | 22 | |
| Table C Flanges | 255 | 210 | 8 | 16 | 18 | |
| Table E Flanges | 255 | 210 | 8 | 16 | 18 | |
| ISO 7005 (DIN) Flanges | PN20 Flanges | 255 | 216 | 8 | M20 | 22 |
| PN10 Flanges | 250 | 210 | 8 | M16 | 18 | |
| PN25 Flanges | 270 | 220 | 8 | M24 | 26 | |
| PN6 Flanges | 240 | 200 | 8 | M16 | 18 | |
| PN16 Flanges | 250 | 210 | 8 | M16 | 18 | |
| PN40 Flanges | 270 | 220 | 8 | M24 | 26 | |
| PN35 Flanges | - | - | - | - | - | |
| PN21 Flanges | - | - | - | - | - | |
| PN16 Flanges | - | - | - | - | - | |
| AS 4087 Flanges | PN14 Flanges | 280 | 235 | 8 | M16 | 18 |
| ANSI B16.5 Flanges | ANSI 900 Flanges | 349 | 279 | 8 | 32 | 35 |
| ANSI 300 Flanges | 279 | 235 | 8 | 19 | 22 | |
| ANSI 150 Flanges | 254 | 216 | 8 | 19 | 22 | |
| ANSI 600 Flanges | 330 | 267 | 8 | 25 | 29 | |
| ANSI 1500 Flanges | 375 | 292 | 8 | 38 | 41 |
Titanium Grade 5 Flanges Supplier in India offers high-quality, corrosion-resistant flanges at competitive prices.
Regal Sales Corporation can supply Titanium Grade 5 Flanges product in Philippines, Morocco, Brazil, Belgium, Germany, Netherlands, Peru with in 2 weeks
| Description | Per Kg Price In Singapore | Per Kg Price In UAE | Per Kg Price In USD | Per Kg Price In Malaysia |
|---|---|---|---|---|
| 50 NB X 150# TITANIUM FLANGE Grade 5 FLANGE | SGD 59.45 | UAE 155.24 | US $42.94 | MYR 188.27 |
| 1/2 NPT 1NPS X 150# TITANIUM GRADE 5 BLIND RF FLANGE | SGD 80.01 | UAE 208.92 | US $57.79 | MYR 253.37 |
| OD 700 X ID 385 X 25MM THICK TITANIUM GR5 FLANGE | SGD 57.58 | UAE 150.35 | US $41.59 | MYR 182.34 |
| 737 MM OD X 511MM ID X 6MM THK TITANIUM GR5 CIRCULAR FLANGE | SGD 23.76 | UAE 62.04 | US $17.16 | MYR 75.24 |
WERKSTOFF NR.
3.7165
UNS
N56400
Get ANSI B16.5 Ti. Alloy WNRF Flanges & DIN 3.7165 Slip on FlangesWith High Tensile Strength, Check Mechanical Properties & Chemical Composition
| Property | Value |
|---|---|
| Electrical Resistivity | 0.0017 Ω·m |
| Density | 4.43 g/cm³ (4430 kg/m³) |
| Poisson's Ratio | 0.34 |
| Thermal Conductivity | 6.7 W/m·K |
| Young’s Modulus | 113,800 MPa (16400 ksi) |
| Hardness | 36 HRC |
| Specific Heat | 0.526 J/g·K |
Elongation
14 %
Melting Point
1632 °C (2970 °F)
Yield Strength
Psi – 128000 , MPa – 880
Tensile Strength
Psi – 138000 , MPa – 950
| Property | Titanium Grade 5 Flanges | Titanium Grade 7 Flanges |
|---|---|---|
| Cost | Less expensive | More expensive due to Pd |
| Strength | High (900 MPa UTS) | Lower (550 MPa UTS) |
| Composition | 90% Ti, 6% Al, 4% V | 99.8% Ti, 0.2% Pd |
| Weldability | Challenging | Easier |
| Applications | Aerospace, medical, automotive | Chemical processing, marine |
| Corrosion Resistance | Good | Excellent (acid & chloride resistance) |
Yes, Titanium Grade 5 can be anodized to increase its surface hardness and enhance its corrosion resistance.
- ➤ Increased strength and hardness.
- ➤ Improved fatigue and creep resistance.
- ➤ Altered ductility
- ➤ Reduced toughness
- ➤ Controlled microstructure