ASTM F467 Nuts
ASTM F467 Nuts are non-ferrous commercial wrought nuts that are used in high tensile and high stress applications. The material has different alloy grades such as alloy 260, 464, 630 and 655 depending on the chemical composition. the ASTM F467m Nuts have aluminum copper, nickel, silicon, zinc, lead, iron and manganese in their composition. Iron can be present but in less than 4% and the amount of iron varies with the grade of alloy. The ASTM F467 Grade 5 Nuts have proof stresses varying with the grades starting from 50ksi to 130ksi.
ASTM F467 Grade 5 Nuts
ASTM F467 Nuts
ASTM F467 Hex Nuts
The size of the nuts range from ¼ inches to 1 ½ inches. Custom sizes are available for custom requirement as well. There are different types of nuts such as the ASTM F467 Wing Nuts which are used in open applications. The wings of the nuts make them easier to install with bear hands. Applications which have regular installation and removal of the nuts use this type of nuts for the ease of operation. The ASTM F467M Lock Nuts are used in heavy vibration systems such as wheels and engine parts. The lock nut design allows the nut to hang on and not loosen under heavy vibrations. There are other types such as the ASME SF467 Dome Nuts which have smooth heads. These domes avoid damage to the other components, tools and surfaces by having a polished blunt head that looks like a dome. There are hex nuts and ASTM F467 Square Nuts that are used under different circumstances as well. These nuts are used in oil and gas, construction, chemical, food processing, marine and other industrial applications.
Table of Content
- Specification of ASTM F467 Nuts
- List Of ASTM F467 Wing Nuts Types
- Size Chart of ASTM F467 Grade 5 Nuts
- ASTM F467 Hex Nuts Dimension Standards
- ASTM F467M Heavy Hex nuts Dimension Chart
- ASME SF467 Dome Nuts Chemical Resistance Guide
- Mechanical Analysis of ASTM F467 Wing Nuts
- ASTM F467 Metric Nuts Equivalent Material
| Standards | Designation |
|---|---|
| ASTM | F467 |
| Astm F467 Nuts Delivery time | custom product will according to special requirement, Regular product is about 7-15 days |
| ASTM F467 Nuts Coatings | Cadmium, Black Oxide, Teflon, Galvanized, Zinc, Xylan, Others Upon Request |
| Astm F467 Nuts Dimensions | ASME B18.3, B18.2.1 |
| Astm F467 Nuts Certification | Dual Certified As per ASME & ASTM Codes |
| Additional Certifications | Merkblatt AD 2000 W2 Certified,PED 97/23/EC Certified |
| Mandatory Requirements | Free from Radioactive & Mercury Contamination |
| Additional Requirements | NACE MR0175 / MR0103 /ISO 15156 Compliance |
F467 Acorn Nuts
ASTM F467 Nyloc Nuts
ASTM F467 T Nuts
F467 Serrated Flange Nuts
F467 Panel Nuts
SF467 Wing Nuts
ASME SF467 Dome Nuts
ASTM F467 Hex Head Nuts
F467 Hex Nuts
F467 Lock Nut
F467 Self Locking Nuts
ASTM A182 F467 Nylon Insert Nuts
| Nut Size (mm) |
Diameter* (mm) |
Height (mm) |
||
|---|---|---|---|---|
| Hex Nut | Jam Nut | Nylock Nut | ||
| 2 | 4 | 1.6 | 1.2 | - |
| 2.5 | 5 | 2 | 1.6 | - |
| 3 | 5.5 | 2.4 | 1.8 | 4 |
| 4 | 7 | 3.2 | 2.2 | 5 |
| 5 | 8 | 4 | 2.7 | 5 |
| 6 | 10 | 5 | 3.2 | 6 |
| 7 | 11 | 5.5 | 3.5 | - |
| 8 | 13 | 6.5 | 4 | 8 |
| 10 | 17 | 8 | 5 | 10 |
| 12 | 19 | 10 | 6 | 12 |
| 14 | 22 | 11 | 7 | 14 |
| 16 | 24 | 13 | 8 | 16 |
| 18 | 27 | 15 | 9 | 18.5 |
| 20 | 30 | 16 | 10 | 20 |
| * This is the diameter across the flats. It is also the size of wrench to use. | ||||
| Nominal Size or Basic Major Thread Diameter | F | G | H | ||||||
| Width Across Flats |
Width Across Corners |
Thickness | |||||||
| Basic | Max | Min | Max | Min | Basic | Max | Min | ||
| 1/4 | .2500 | 7/16 | .438 | .428 | .505 | .488 | 7/32 | .226 | .212 |
| 5/16 | .3125 | 1/2 | .500 | .489 | .577 | .557 | 17/64 | .273 | .258 |
| 3/8 | .3750 | 9/16 | .562 | .551 | .650 | .628 | 21/64 | .337 | .479 |
| 7/16 | .4375 | 11/16 | .688 | .675 | .794 | .768 | 3/8 | .385 | .365 |
| 1/2 | .5000 | 3/4 | .750 | .736 | .866 | .840 | 7/16 | .448 | .427 |
| 9/16 | .5625 | 7/8 | .875 | .861 | 1.010 | .982 | 31/64 | .496 | .473 |
| 5/8 | .6250 | 15/16 | .938 | .922 | 1.083 | 1.051 | 35/64 | .559 | .535 |
| 3/4 | .7500 | 1-1/8 | 1.125 | 1.088 | 1.299 | 1.240 | 41/64 | .665 | .617 |
| 7/8 | .8750 | 1-5/16 | 1.312 | 1.269 | 1.516 | 1.447 | 3/4 | .776 | .724 |
| 1 | 1.0000 | 1-1/2 | 1.500 | 1.450 | 1.732 | 1.653 | 55/64 | .887 | .831 |
| 1-1/8 | 1.1250 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 31/32 | .999 | .939 |
| 1-3/8 | 1.3750 | 2-1/16 | 2.062 | 1.994 | 2.382 | 2.273 | 1-11/64 | 1.206 | 1.138 |
| 1-1/2 | 1.500 | 2-1/4 | 2.250 | 2.175 | 2.598 | 2.480 | 1-9/32 | 1.ASTM A194 GR. 8 | 1.245 |
| 1-5/8 | 1.6250 | 2-7/16 | 2.438 | 2.356 | 2.815 | 2.686 | 1-25/64 | 1.429 | 1.353 |
| 1-3/4 | 1.7500 | 2-5/8 | 2.625 | 2.538 | 3.031 | 2.893 | 1-1/2 | 1.540 | 1.460 |
| 2 | 2.0000 | 3 | 3.000 | 2.900 | 3.464 | 3.306 | 1-23/32 | 1.763 | 1.675 |
| 2-1/4 | 2.2500 | 3-3/8 | 3.375 | 3.263 | 3.897 | 3.719 | 1-15/16 | 1.986 | 1.890 |
| 2-1/2 | 2.5000 | 3-3/4 | 3.750 | 3.625 | 4.330 | 4.133 | 2-5/32 | 2.209 | 2.105 |
| 2-3/4 | 2.7500 | 4-1/8 | 4.125 | 3.988 | 4.763 | 4.546 | 2-3/8 | 2.431 | 2.319 |
| Nominal Size or Basic Major Thread Diameter | F | G | H | ||||||
| Width Across Flats | Width Across Corners | Thickness | |||||||
| Basic | Max | Min | Max | Min | Basic | Max | Min | ||
| 1/4 | .2500 | 1/2 | .500 | .488 | .577 | .556 | 15/64 | .250 | .218 |
| 5/16 | .3125 | 9/16 | .562 | .546 | .650 | .622 | 19/64 | .314 | .280 |
| 3/8 | .3750 | 11/16 | .688 | .669 | .794 | .763 | 23/64 | .377 | .341 |
| 7/16 | .4375 | 3/4 | .750 | .728 | .866 | .830 | 27/64 | .441 | .403 |
| 1/2 | .5000 | 7/8 | .875 | .850 | 1.010 | .969 | 31/64 | .504 | .464 |
| 9/16 | .5625 | 15/16 | .938 | .909 | 1.083 | 1.037 | 35/64 | .568 | .526 |
| 5/8 | .6250 | 1-1/16 | 1.062 | 1.031 | 1.227 | 1.175 | 39/64 | .631 | .587 |
| 3/4 | .7500 | 1-1/4 | 1.250 | 1.212 | 1.443 | 1.382 | 47/64 | .758 | .710 |
| 7/8 | .8750 | 1-7/16 | 1.438 | 1.394 | 1.660 | 1.589 | 55/64 | .885 | .833 |
| 1 | 1.0000 | 1-5/8 | 1.325 | 1.575 | 1.876 | 1.796 | 63/64 | 1.012 | .956 |
| 1-1/8 | 1.1250 | 1-13/16 | 1.812 | 1.756 | 2.093 | 2.002 | 1-7/64 | 1.139 | 1.079 |
| 1-1/4 | 1.2500 | 2 | 2.000 | 1.938 | 2.309 | 2.209 | 1-7/32 | 1.251 | 1.187 |
| 1-3/8 | 1.3750 | 2-3/16 | 2.188 | 2.119 | 2.526 | 2.416 | 1-11/32 | 1.378 | 1.460 |
| 1-1/2 | 1.5000 | 2-3/8 | 2.375 | 2.300 | 2.742 | 2.622 | 1-15/32 | 1.505 | 1.433 |
| 1-5/8 | 1.6250 | 2-9/16 | 2.562 | 2.481 | 2.959 | 2.828 | 1-19/32 | 1.632 | 1.556 |
| 1-3/4 | 1.7500 | 2-3/4 | 2.750 | 2.662 | 3.175 | 3.035 | 1-23/32 | 1.759 | 1.679 |
| 2 | 2.0000 | 3-1/8 | 3.125 | 3.025 | 3.608 | 3.449 | 1-31/32 | 2.013 | 1.925 |
| 2-1/4 | 2.2500 | 3-1/2 | 3.500 | 3.388 | 4.041 | 3.862 | 2-13/64 | 2.251 | 2.155 |
| 2-1/2 | 2.5000 | 3-7/8 | 3.875 | 3.750 | 4.474 | 4.275 | 2-29/64 | 2.505 | 2.401 |
| 2-3/4 | 2.7500 | 4-1/4 | 4.250 | 4.112 | 4.907 | 4.688 | 2-45/64 | 2.759 | 2.647 |
| 3 | 3.0000 | 4-5/8 | 4.625 | 4.475 | 5.340 | 5.102 | 2-61/64 | 3.013 | 2.893 |
| 3-1/4 | 3.2500 | 5 | 5.000 | 4.838 | 5.774 | 5.515 | 3-3/16 | 3.252 | 3.124 |
| 3-1/2 | 3.5000 | 5-3/8 | 5.375 | 5.200 | 6.207 | 5.928 | 3-7/16 | 3.506 | 3.370 |
| 3-3/4 | 3.7500 | 5-3/4 | 5.750 | 5.562 | 6.640 | 6.341 | 3-11/16 | 3.670 | 3.616 |
| 4 | 4.0000 | 6-1/8 | 6.125 | 5.925 | 7.073 | 6.755 | 3-15/16 | 4.014 | 3.862 |
| UNS Designation | Alloy | General Name | Aluminum | Copper, min | Iron, max | Manganese, max | Nickel, max | Phosphorus | Silicon | Zinc, maxA | Lead, max | Tin | Arsenic, max |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C11000 | 110 | ETP Copper | — | 99.9 | — | — | — | — | — | — | — | — | — |
| C26000 | 260 | Brass | — | 68.5 – 71.5 | 0.05 | — | — | — | — | balance | 0.07 | — | — |
| C27000 | 270 | Brass | — | 63.0 – 68.5 | 0.07 | — | — | — | — | balance | 0.10 | — | — |
| C46200 | 462 | Naval Brass | — | 62.0 – 65.0 | 0.10 | — | — | — | — | balance | 0.20 | 0.50 – 1.00 | — |
| C46400 | 464 | Naval Brass | — | 59.0 – 62.0 | 0.10 | — | — | — | — | balance | 0.20 | 0.50 – 1.00 | — |
| C51000 | 510 | Phosphor Bronze | — | balanceA | 0.10 | — | — | 0.03 – 0.35 | — | 0.30 | 0.05 | 4.20 – 5.80 | — |
| C61300 | 613 | Aluminum Bronze | 6.0 – 7.5 | B | 2.0 – 3.0 | 0.10 | 0.15C | 0.015 | 0.10 | 0.05 | 0.01 | 0.20 – 0.50 | — |
| C61400 | 614 | Aluminum Bronze | 6.0 – 8.0 | 88.0D | 1.5 – 3.5 | 1.00 | — | — | — | — | — | — | — |
| C63000 | 630 | Aluminum Bronze | 9.0 – 11.0 | 78.0D | 2.0 – 4.0 | 1.50 | 4.0 – 5.5 | — | 0.25 max | — | — | 0.20 max | — |
| C64200 | 642 | Aluminum Silicon Bronze | 6.3 – 7.6 | 88.65D | 0.30 | 0.10 | 0.25 | 1.50 – 2.20E | 0.50 | 0.05 | 0.20 max | 0.15 | |
| C65100 | 651 | Silicon Bronze | — | 96.0D | 0.80 | 0.70 | — | — | 0.8 – 2.0 | 1.50 | 0.05 | — | — |
| C65500 | 655 | Silicon Bronze | — | 94.8D | 0.80 | 1.50 | 0.60 | — | 2.8 – 3.8 | 1.50 | 0.05 | — | — |
| C66100 | 661 | Silicon Bronze | 0.25 max | 94.0D | 0.25 | 1.50 | — | — | 2.8 – 3.5 | 1.50 | 0.20 – 0.80 | — | — |
| C67500 | 675 | Manganese Bronze | — | 57.0 – 60.0 | 0.8 – 2.0 | 0.05 – 0.50 | — | — | — | balance | 0.20 | 0.50 – 1.50 | — |
| C71000 | 710 | Cupro Nickel | — | 74.0D | 0.60 | 1.00 | 19.0 – 23.0C | — | 1.00 | 0.05 | — | — | |
| C71500 | 715 | Cupro Nickel | — | 65.0D | 0.40 – 0.70 | 1.00 | 29.0 – 33.0C | — | — | 1.00 | 0.05 | — | — |
| Alloy | Mechanical Property Marking | Nominal Thread Diameter, inch | HardnessA | Proof Stress, min, ksi |
|---|---|---|---|---|
| Copper | ||||
| Cu 110 | F 467A | all | 65 HRF | 30 |
| Cu 260 | F 467AB | all | 55 HRF | 60 |
| Cu 270 | F 467B | all | 55 HRF | 60 |
| Cu 462 | F 467C | all | 65 HRB | 50 |
| Cu 464 | F 467D | all | 55 HRB | 50 |
| Cu 510 | F 467E | all | 60 HRB | 60 |
| Cu 613 | F 467F | all | 70 HRB | 80 |
| Cu 614 | F 467G | all | 70 HRB | 75 |
| Cu 630 | F 467H | all | 85 HRB | 100 |
| Cu 642 | F 467J | all | 75 HRB | 75 |
| Cu 651 | F 467K | all | 75 HRB | 70 |
| Cu 655 | F 467L | all | 60 HRB | 50 |
| Cu 661 | F 467M | all | 75 HRB | 70 |
| Cu 675 | F 467N | all | 60 HRB | 55 |
| Cu 710 | F 467P | all | 50 HRB | 45 |
| Cu 715 | F 467R | all | 60 HRB | 55 |
| Nickel Alloys | ||||
| Ni 59 Grade 1 | F467FN | all | 21 HRC | 120 |
| Ni 59 Grade 2 | F467GN | all | 23 HRC | 135 |
| Ni 59 Grade 3 | F467HN | all | 25 HRC | 160 |
| Ni 59 Grade 4 | F467JN | all | 80 HRB | 100 |
| NI 335 | F 467S | all | 20 HRC | 115 |
| Ni 276 | F 467T | all | 20 HRC | 110 |
| Ni 400 | F 467U | all | 75 HRB | 80 |
| Ni 405 | F 467V | all | 60 HRB | 70 |
| Ni 500 | F 467W | all | 24 HRC | 130 |
| Ni 625 | F 467AC | all | 85 HRB – 35 HRC | 60 |
| Ni 686 Grade 1 | F 467BN | all | 21 HRC | 120 |
| Ni 686 Grade 2 | F 467CN | all | 23 HRC | 135 |
| Ni 686 Grade 3 | F 467DN | all | 25 HRC | 160 |
| Ni 686 Grade 4 | F 467EN | all | 65 HRB – 25 HRC | 100 |
| Aluminum | ||||
| Al 2024 – T4B | F 467X | all | 70 HRB | 55 |
| Al 6061 – T6 | F 467Y | all | 40 HRB | 40 |
| Al 6262 – T9 | F 467Z | all | 60 HRB | 52 |
| Titanium Alloys | ||||
| Ti 1 | F 467AT | all | 140 HV | 40 |
| Ti 2 | F 467BT | all | 150 HV | 55 |
| Ti 4 | F 467CT | all | 200 HV | 85 |
| Ti 5 | F 467DT | all | 30 HRC | 135 |
| Ti 7 | F 467ET | all | 160 HV | 55 |
| Ti 19 | F 467FT | all | 24 HRC | 120 |
| Ti 23 | F 467GT | all | 25 HRC | 125 |
| Ti-5-1-1-1 | F 467AHT | all | 24 HRC | 105 |
| Alloy Group | Alloy Designation | Alloy Type |
|---|---|---|
| 1 | 303, 304, 304L, 305, 384, XM1, 18-9LW, 302HQ, 303Se | Austenitic |
| 2 | 316, 316L | Austenitic |
| 3 | 321, 347 | Austenitic |
| 4 | 430, 430F | Ferritic |
| 5 | 410, 416, 416Se | Martensitic |
| 6 | 431 | Martensitic |
| 7 | 630 (17-4) | Precipitation Hardening |